How To - ENC28J60 (Ethernet) + RPi Zero in headless configuration

[miguipda]

Dear all,

thank you for your help because it is my first entry in PiCore world ;-)

Now PiCore has so evoluated I suppose this subject has been updated to get an easy way to do it.

As described in the Subject I need to use my RPi Zero with Ethernet shield (ENC28J60) without other network (Wifi - Bluetooth).
https://www.banggood.com/Enc28j60-Network-Adapter-Module-For-Raspberry-Pi-Zero-p-1252558.html?rmmds=myorder&cur_warehouse=CN

Before installing PiCore I need to know where looking to first to all those steps :
1) what is the first account and password to enter in the 3) here below
2) which parameter (in which config file) must I use to disable wifi & bluetooth at boot
3) which package and where to add the SSH package
4) which package and where to add the ENC28J60 package required to be able to use this RPi Zero in headless configuration

3) & 4) > is it in the tce optional and mentionned in the boot list
           or is the SSH and/or ENC28J60 already included in the core of PiCore ?

Sincerely thank you for your help.

Have a nice day.

[Juanito]

The password for ssh is piCore

Bluetooth and wifi are not available at boot if you do not load the bluez and wifi extensions

The ssh extension (package) is called openssh, it is already included and loaded at boot.

ENC28J60 is not included as far as I know.

See also:
http://tinycorelinux.net/12.x/armv7/releases/RPi/IMPORTANT
http://tinycorelinux.net/12.x/armv7/releases/RPi/README

[Paul_123]

For piCore12,  the overlay is present, but the kernel module is not supplied in the base or any current extension.  You can find the additional kernel modules here   http://www.tinycorelinux.net/12.x/armv6/releases/RPi/src/kernel/