resolution dropped! :(

[xor]

resolution dropped!

i only use VGA output

Code: [Select]

$ xrandr
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 16384 x 16384
HDMI-0 disconnected primary (normal left inverted right x axis y axis)
VGA-0 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
   1024x768      60.00*
   800x600       60.32    56.25 
   848x480       60.00 
   640x480       59.94 
DVI-0 disconnected (normal left inverted right x axis y axis)
  1360x768_60.00 (0x6f7) 84.750MHz -HSync +VSync
        h: width  1360 start 1432 end 1568 total 1776 skew    0 clock  47.72KHz
        v: height  768 start  771 end  781 total  798           clock  59.80Hz
  1368x768_60.00 (0x752) 85.250MHz -HSync +VSync
        h: width  1368 start 1440 end 1576 total 1784 skew    0 clock  47.79KHz
        v: height  768 start  771 end  781 total  798           clock  59.88Hz


Code: [Select]

$ cvt 1366 768
# 1368x768 59.88 Hz (CVT) hsync: 47.79 kHz; pclk: 85.25 MHz
Modeline "1368x768_60.00"   85.25  1368 1440 1576 1784  768 771 781 798 -hsync +vsync

$ xrandr --newmode "1368x768_60.00"   85.25  1368 1440 1576 1784  768 771 781 798
 -hsync +vsync
X Error of failed request:  BadName (named color or font does not exist)
  Major opcode of failed request:  139 (RANDR)
  Minor opcode of failed request:  16 (RRCreateMode)
  Serial number of failed request:  33
  Current serial number in output stream:  33

my system configuration

tce-load -wi Xorg-7.7-3d firmware-radeon xf86-video-ati alsa-config pavucontrol htop windowmaker windowshot ezremaster xfe aterm wbar kmaps getlocale firefox_getLatest

[Juanito]

code tags inserted to make your post readable

[xor]

the problem stems from 64-bit.
I had no such problems in the 32-bit version.

http://forum.tinycorelinux.net/index.php/topic,22749.msg152078.html#msg152078

code tags inserted to make your post readable

[Rich]

Hi xor
What happens if you do it like this:

Code: [Select]

xrandr --newmode "1368x768-60"   85.25  1368 1440 1576 1784  768 771 781 798 -hsync +vsync

[xor]

i think that
the problem arises for the following reason.

http://forum.tinycorelinux.net/index.php/topic,22749.msg152086.html#msg152086

Hi xor
What happens if you do it like this:

Code: [Select]

xrandr --newmode "1368x768-60"   85.25  1368 1440 1576 1784  768 771 781 798 -hsync +vsync

[Rich]

Hi xor
Does that mean my suggestion did not work?
Or does that mean you did not even bother trying my suggestion?

[xor]

$ xrandr --newmode "1368x768_60.00"   85.25  1368 1440 1576 1784  768 771 781 798
 -hsync +vsync

X Error of failed request:  BadName (named color or font does not exist)
  Major opcode of failed request:  139 (RANDR)
  Minor opcode of failed request:  16 (RRCreateMode)
  Serial number of failed request:  33
  Current serial number in output stream:  33

I tried your suggestion, but I did not get any results.
32-bit deployment does not have this problem
but I'm having this problem in 64-bit version.
and I guess I wrote down the cause of the problem.

http://forum.tinycorelinux.net/index.php/topic,22749.msg152086.html#msg152086

Hi xor
Does that mean my suggestion did not work?
Or does that mean you did not even bother trying my suggestion?

[Rich]

Hi xor

... I tried your suggestion, but I did not get any results. ...

Did you get the same error message?
Did you get any messages.

[xor]

yes yes yes

Hi xor

... I tried your suggestion, but I did not get any results. ...

Did you get the same error message?
Did you get any messages.

[xor]

http://forum.tinycorelinux.net/index.php/topic,22749.msg152335.html#msg152335