Tiny Core Base > CorePlus

Some help with IBM thinkpad T30

<< < (9/10) > >>

reto0110:

--- Quote ---alsactl init

Found hardware: "ICH" "Analog Devices AD1881A" "AC97a:41445348" "0x1014" "0x0508"
Hardware is initialized using a generic method
--- End quote ---

I un-muted Master volumen and all volumens in high levels. I set the red points in Line volumen. but:


--- Code: ---speaker-test [-Ddefault:1] -c2 -t wav -l1
--- End code ---

the speaker makes no sound, just shows:


--- Code: ---Playback device is default
Stream parameters are 48000Hz, S16_LE, 2 channels
WAV file(s)
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 2048 to 16384
Period size range from 1024 to 1024
Using max buffer size 16384
Periods = 4
was set period_size = 1024
was set buffer_size = 16384
 0 - Front Left
 1 - Front Right
Time per period = 2.688197

--- End code ---


and


--- Code: ---amixer set "Master" 80 unmute

Simple mixer control 'Master',0
  Capabilities: pvolume pswitch pswitch-joined
  Playback channels: Front Left - Front Right
  Limits: Playback 0 - 63
  Mono:
  Front Left: Playback 63 [100%] [0.00dB] [on]
  Front Right: Playback 63 [100%] [0.00dB] [on]

--- End code ---

And alsasound service is up
 :(

reto0110:
Also


--- Code: ---sudo /usr/local/etc/init.d/alsasound start
--- End code ---

return:


--- Code: ---rmmod cant't unload module ´'snd_timer': Resource temporarily unavalilable'
--- End code ---

and hundreds of records like that with ´snd_timer´ changed.

jazzbiker:
Hi, reto0110!

I don't use alsa-config.tcz, i placed such a file in my home dir:

--- Code: ---tc@box:~$ cat .asoundrc
pcm.!default {
        type hw
        card 0
}

ctl.!default {
        type hw           
        card 0
}

--- End code ---
and have the sound. This is dumb, but it works. At least it can be some working starting point.

reto0110:
I don't know if is because of this, but I just read this lines in xorg log:


--- Code: ---[    88.560] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    88.560] (II) No input driver specified, ignoring this device.
[    88.560] (II) This device may have been added with another device file.

--- End code ---

reto0110:
I've installed the graphic driver, but Should I to uninstall the older one? How?

Besides I get this innocuous message in the boot screen:

https://drive.google.com/open?id=1xrQXfd6L5G7YPV1VfKLJUXlcXWA9sC1W

Navigation

[0] Message Index

[#] Next page

[*] Previous page