Tiny Core Base > TCB Talk
Booting 32bit TC from 64bit efi boots to blank screen with underscore
jimmyjohn:
@coreplayer2
The device is not visible in GParted. I can see it in GParted when I boot a different distro, such as debian, however, it is not visible in gparted in TC.
That said, I booted a different distro and followed your partitioning instructions, then booted into TC again to see if that made a difference, and unfortunately it is still not showing up :-( Thanks for the idea though! I really thought that might be it as soon as I read it.
coreplayer2:
--- Quote from: jimmyjohn on July 09, 2019, 08:48:35 PM ---...
then booted into TC again to see if that made a difference, and unfortunately it is still not showing up :-( Thanks for the idea though! I really thought that might be it as soon as I read it.
--- End quote ---
Which TC ? corepure64 ?
coreplayer2:
@jimmyjohn
Also is the mmc device listed in the BIOS (assuming it has one) as the primary boot device?
PDP-8:
@jimmyjohn
Be aware that our hardware, your Kangaroo and my Computestick, show the same behavior, regardless if it is the on-board eMMC formatted as NTFS, or the optional external micro-sd card. formatted with fat32.
All bios/setup has been checked to see if there was anything special blocking mmc devices. There is no option at least on mine to change this at all. Yet Porteus boots and sees it all. ?
BUT, on an Intel NUC, with a stock install booting with an sda, it *can* see mmc devices with a stock install of TinyCore!
So maybe there is something different between hardcore NUC's, and little computesticks and kangaroos. :)
The fuggedaboutit option:
Just use a Sandisk UltraFit usb. Just a nub hanging out, not a big key.
Rarely do I have to access the ntfs windows partition from within TC, and the micro-sd cards are mainly used for pi-core...
coreplayer2:
--- Quote from: PDP-8 on July 09, 2019, 09:14:06 PM ---
All bios/setup has been checked to see if there was anything special blocking mmc devices. There is no option at least on mine to change this at all. Yet Porteus boots and sees it all. ?
BUT, on an Intel NUC, with a stock install booting with an sda, it *can* see mmc devices with a stock install of TinyCore!
--- End quote ---
Hi PDP-8. Any chance of listing the output of LSMOD on either /both of the PC’s whilst the device is visible please
Sent from my iPhone using Tapatalk
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version