Tiny Core Extensions > TCE Corepure64

Gnome Desktop

<< < (3/6) > >>

curaga:
Using Gnome will not change what the text looks like in FLTK apps. Each app will keep its look in different environments, and you can use any app in any environment (with some exceptions).

Juanito:

--- Quote from: mark123 on June 09, 2019, 06:13:53 PM ---The command gnome-session produced a lot of errors about gnome-keyring among others.

--- End quote ---
OK, but did gnome start? gnome-session will autostart any gnome-keyring daemons it needs.


--- Quote ---If I try 32 Bit TinyCore 10 do I use TinyCore or MicroCore as a starting point?
--- End quote ---
gnome-session is only available in CorePure64


--- Quote ---Can you send a screen shot of your CorePure64 Gnome setup?

--- End quote ---
see attached

mark123:
Juanito,

I appreciate all of your help on this.

No, gnome did not start.

I replaced my NVIDIA 610 with a simpler PCI Video Card  NVIDIA GEForce 6200 and tried again.

The command "sudo /usr/local/etc/init.d/networkmanager start" failed.

When I ran the command "su - tc" the system went to the TinyCore Background Screen and I had no menus or a way to exit.

Here is my procedure:

1. Install CorePure64 with no GUI to a 1GB FlashDisk
2. tce-load -wi gnome-session
3. tce-load -wi xdg-user-dirs.
4. tce-load -wi graphics-KERNEL
5. tce-load -wi Xorg-7.7-3d

$ xdg-user-dirs-update (THIS WORKS)
$ sudo /usr/local/etc/init.d/dbus start (THIS WORKS)
$ sudo /usr/local/etc/init.d/networkmanager start (THIS FAILS)
$ sudo /usr/local/lib/elogind/elogind --daemon (THIS WORKS)
$ su - tc (THIS FAILS to a TinyCore GUI Background Screen with NO means to exit)
$ gnome-session (COULD NOT TRY THIS)

Juanito:

--- Quote from: mark123 on June 10, 2019, 08:25:28 AM ---$ su - tc (THIS FAILS to a TinyCore GUI Background Screen with NO means to exit)

--- End quote ---

You need to execute all of the commands from the console prompt, not from a gui terminal window.

mark123:
I used CorePure64 so I was using the console prompt! I have no GUI Installed.

Is my written procedure correct? Something must be missing!

Navigation

[0] Message Index

[#] Next page

[*] Previous page