:( no sound ): "Realtek ALC887-VD" what should I do !?

[xor]

The two commands you list are correct for your hardware and alsa.

The output you got from the speaker-test command indicates that your analogue sound is working, but muted - that is why I made the two suggestions for alsamixer.

Using xfce is unlikely to help with your problem.

If you would like to try pulseaudio, you can use the following commands:

Code: [Select]

$ tce-load -i graphics-4.19.10-tinycore64 alsa-config Xorg-7.7 xf86-video-ati firmware-radeon flwm wbar aterm alsa pavucontrol
$ sudo /usr/local/etc/init.d/dbus start
$ startx
Then double-click on the pavucontrol icon, which will start pulseaudio.

You can then use, for example, xmms-pulse to play an audio file to test your setup.

ok worked

ezremaster  TCL.iso !

Code: [Select]

$ sudo /usr/local/etc/init.d/dbus start
$ startx
ok worked



Now the question is; how to permanently
I can convert it to iso file with ezremaster ! ?

[attachment deleted by admin]

[Juanito]

Since you are finding ezremaster difficult, I suggested installing tinycore in the normal way to an sd card and then write protecting it - did you try this?

[xor]

Since you are finding ezremaster difficult, I suggested installing tinycore in the normal way to an sd card and then write protecting it - did you try this?

I am thinking of making a generalized distribution in the form of iso.
I want to minimize the problems that may occur.

I want these commands to run at boot.

Code: [Select]

$ sudo /usr/local/etc/init.d/dbus start
$ startx
what should I do ! ?

[xor]

Since you are finding ezremaster difficult, I suggested installing tinycore in the normal way to an sd card and then write protecting it - did you try this?

I want these commands to run at boot.

Code: [Select]

$ sudo /usr/local/etc/init.d/dbus start
$ startx

[Juanito]

Put "/usr/local/etc/init.d/dbus start" in /opt/bootlocal.sh

If an X server and window manager are present onboot, there is no need for "startx", the gui will start automatically.

[xor]

Put "/usr/local/etc/init.d/dbus start" in /opt/bootlocal.sh

If an X server and window manager are present onboot, there is no need for "startx", the gui will start automatically.

with which command can I save this!

[Rich]

Hi xor
Do this:

Code: [Select]

sudo chown root:staff /opt/bootlocal.shThen try saving again.

[xor]

Hi xor
Do this:

Code: [Select]

sudo chown root:staff /opt/bootlocal.shThen try saving again.

I want to make a Live CD TCL.
the command you suggested; the machine disappears when it restarts.
It doesn't make any changes to the iso file!
not permanent!

ok I found a solution

first I execute this script:

Code: [Select]

cd
wget http://www.tinycorelinux.net/4.x/x86/release/Core-current.iso

sudo mkdir /mnt/tmp
sudo mount Core-current.iso /mnt/tmp -o loop,ro
sudo cp -a /mnt/tmp/boot /tmp
sudo mv /tmp/boot/core.gz /tmp
sudo umount /mnt/tmp

mkdir /tmp/extract
cd /tmp/extract
sudo zcat /tmp/core.gz | sudo cpio -i -H newc -d
then I install all extensions I want to have...

then I open /tmp/extract/opt/bootlocal.sh and write
   -> sudo -u tc tce-load -i XXX XXX XXX XXX XXX
      # XXX = all extensions

and at least I execute this script:

Code: [Select]

sudo cp -R /tmp/tce /tmp/extract/tmp/

sudo depmod -a -b /tmp/extract 3.0.21-tinycore

tce-load -wi gzip

cd /tmp/extract
sudo find | sudo cpio -o -H newc | gzip -2 > ../mycore.gz

tce-load -wi mkisofs-tools.tcz
tce-load -wi brasero.tcz
tce-load -wi isomaster.tcz

cd /tmp
sudo mv mycore.gz boot
sudo mv boot/mycore.gz boot/core.gz
mkdir newiso
sudo mv boot newiso
sudo chmod 777 -R newiso

cd /tmp

sudo mkisofs -l -J -R -V TC-custom -no-emul-boot -boot-load-size 4 -boot-info-table -b boot/isolinux/isolinux.bin -c boot/isolinux/boot.cat -o sfos.iso newiso



[xor]

Put "/usr/local/etc/init.d/dbus start" in /opt/bootlocal.sh

If an X server and window manager are present onboot, there is no need for "startx", the gui will start automatically.

"pavucontrol"; Where are the settings stored?
which folder!? which file !?

"ALSA"; Where are the settings stored?
which folder!? which file !?

"ALSA-mixer"; Where are the settings stored?
which folder!? which file !?

[Rich]

Hi xor
These are the files I'm aware of:

Code: [Select]

/home/tc/.config/pulse/*
/home/tc/.config/pavucontrol.ini
/usr/local/etc/alsa/asound.state

[xor]

I solved the problem!



TMP folder; How do I get full access to all subdirectories and content
I want to make them all "sudo chmod 777"

Hi xor
Do this:

Code: [Select]

sudo chown root:staff /opt/bootlocal.shThen try saving again.

I want to make a Live CD TCL.
the command you suggested; the machine disappears when it restarts.
It doesn't make any changes to the iso file!
not permanent!

ok I found a solution

first I execute this script:

Code: [Select]

cd
wget http://www.tinycorelinux.net/4.x/x86/release/Core-current.iso

sudo mkdir /mnt/tmp
sudo mount Core-current.iso /mnt/tmp -o loop,ro
sudo cp -a /mnt/tmp/boot /tmp
sudo mv /tmp/boot/core.gz /tmp
sudo umount /mnt/tmp

mkdir /tmp/extract
cd /tmp/extract
sudo zcat /tmp/core.gz | sudo cpio -i -H newc -d
then I install all extensions I want to have...

then I open /tmp/extract/opt/bootlocal.sh and write
   -> sudo -u tc tce-load -i XXX XXX XXX XXX XXX
      # XXX = all extensions

and at least I execute this script:

Code: [Select]

sudo cp -R /tmp/tce /tmp/extract/tmp/

sudo depmod -a -b /tmp/extract 3.0.21-tinycore

tce-load -wi gzip

cd /tmp/extract
sudo find | sudo cpio -o -H newc | gzip -2 > ../mycore.gz

tce-load -wi mkisofs-tools.tcz
tce-load -wi brasero.tcz
tce-load -wi isomaster.tcz

cd /tmp
sudo mv mycore.gz boot
sudo mv boot/mycore.gz boot/core.gz
mkdir newiso
sudo mv boot newiso
sudo chmod 777 -R newiso

cd /tmp

sudo mkisofs -l -J -R -V TC-custom -no-emul-boot -boot-load-size 4 -boot-info-table -b boot/isolinux/isolinux.bin -c boot/isolinux/boot.cat -o sfos.iso newiso