Tiny Core Base > Corepure64
:( no sound ): "Realtek ALC887-VD" what should I do !?
xor:
--- Quote from: Juanito on January 27, 2020, 06:16:42 AM ---As stated, you need to load alsa-config before alsa, so your commands should be:
--- Code: ---$ tce-load -i graphics-KERNEL alsa-config Xorg-7.7 xf86-video-ati firmware-radeon flwm wbar aterm alsa
$ speaker-test -Ddefault:1 -c2 -t wav -l1
--- End code ---
--- End quote ---
--- Code: ---$ tce-load -wi graphics-4.19.10-tinycore64 alsa-config Xorg-7.7 xf86-video-ati firmware-radeon flwm wbar aterm alsa
$ speaker-test -Ddefault:1 -c2 -t wav -l1
--- End code ---
--- Code: ---tc@box:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Generic [HD-Audio Generic], device 0: ALC887-VD Analog [ALC887-VD Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Generic [HD-Audio Generic], device 1: ALC887-VD Digital [ALC887-VD Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
--- End code ---
no positive development! :(
Juanito:
That looks OK to me - your analogue sound is card 1.
What happens when you issue this command:
--- Code: ---$ speaker-test -Ddefault:1 -c2 -t wav -l1
--- End code ---
xor:
--- Quote from: Juanito on January 27, 2020, 07:15:42 AM ---That looks OK to me - your analogue sound is card 1.
What happens when you issue this command:
--- Code: ---$ speaker-test -Ddefault:1 -c2 -t wav -l1
--- End code ---
--- End quote ---
--- Quote ---tc@box:~$ speaker-test -Ddefault:1 -c2 -t wav -l1
speaker-test 1.1.5
Playback device is default:1
Stream parameters are 48000Hz, S16_LE, 2 channels
WAV file(s)
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 2048 to 8192
Period size range from 1024 to 1024
Using max buffer size 8192
Periods = 4
was set period_size = 1024
was set buffer_size = 8192
0 - Front Left
1 - Front Right
Time per period = 2.843038
--- End quote ---
--- Quote ---tc@box:~$ speaker-test -Ddefault:0 -c2 -t wav -l1
speaker-test 1.1.5
Playback device is default:0
Stream parameters are 48000Hz, S16_LE, 2 channels
WAV file(s)
ALSA lib pcm_dmix.c:1099:(snd_pcm_dmix_open) unable to open slave
Playback open error: -2,No such file or directory
--- End quote ---
--- Quote ---tc@box:~$ speaker-test -Ddefault:2 -c2 -t wav -l1
speaker-test 1.1.5
Playback device is default:2
Stream parameters are 48000Hz, S16_LE, 2 channels
WAV file(s)
ALSA lib confmisc.c:767:(parse_card) cannot find card '2'
ALSA lib conf.c:4554:(_snd_config_evaluate) function snd_func_card_driver returned error: No such file or directory
ALSA lib confmisc.c:392:(snd_func_concat) error evaluating strings
ALSA lib conf.c:4554:(_snd_config_evaluate) function snd_func_concat returned error: No such file or directory
ALSA lib confmisc.c:1246:(snd_func_refer) error evaluating name
ALSA lib conf.c:4554:(_snd_config_evaluate) function snd_func_refer returned error: No such file or directory
ALSA lib conf.c:5033:(snd_config_expand) Evaluate error: No such file or directory
ALSA lib pcm.c:2501:(snd_pcm_open_noupdate) Unknown PCM default:2
Playback open error: -2,No such file or directory
--- End quote ---
Juanito:
So card 1 (Ddefault:1) is your analogue sound and it looks like it is working.
Did you hear something?
xor:
--- Quote from: Juanito on January 27, 2020, 07:40:55 AM ---So card 1 (Ddefault:1) is your analogue sound and it looks like it is working.
Did you hear something?
--- End quote ---
I am not loading normally.
I'm trying to make an iso file with ezra master
no hdd (I'm running via SD card)
I still can't hear any sound! :(
I want to receive sound over analog connection!
where am i doing wrong. !?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version