Tiny Core Base > TCB Q&A Forum

[ HOW TO ] Resolution Changing ?!

<< < (5/15) > >>

Juanito:
..and also, looking at this:
--- Code: ---[    17.911] (II) VESA(0): Manufacturer: GSM  Model: 4bad  Serial#: 200023
[    17.911] (II) VESA(0): Year: 2009  Week: 11
[    17.911] (II) VESA(0): EDID Version: 1.3
[    17.911] (II) VESA(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
[    17.911] (II) VESA(0): Sync:  Separate  SyncOnGreen
[    17.911] (II) VESA(0): Max Image Size [cm]: horiz.: 41  vert.: 23
[    17.911] (II) VESA(0): Gamma: 2.20
[    17.911] (II) VESA(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[    17.911] (II) VESA(0): First detailed timing is preferred mode
[    17.911] (II) VESA(0): redX: 0.641 redY: 0.334   greenX: 0.301 greenY: 0.608
[    17.911] (II) VESA(0): blueX: 0.145 blueY: 0.073   whiteX: 0.313 whiteY: 0.329
[    17.911] (II) VESA(0): Supported established timings:
[    17.911] (II) VESA(0): 720x400@70Hz
[    17.911] (II) VESA(0): 640x480@60Hz
[    17.911] (II) VESA(0): 640x480@75Hz
[    17.911] (II) VESA(0): 800x600@60Hz
[    17.911] (II) VESA(0): 800x600@75Hz
[    17.911] (II) VESA(0): 832x624@75Hz
[    17.911] (II) VESA(0): 1024x768@60Hz
[    17.911] (II) VESA(0): 1024x768@75Hz

--- End code ---
..it looks like the maximum resolution your display supports is 1024x768?

xor:

--- Quote from: Juanito on June 14, 2019, 03:36:18 AM ---..and also, looking at this:
--- Code: ---[    17.911] (II) VESA(0): Manufacturer: GSM  Model: 4bad  Serial#: 200023
[    17.911] (II) VESA(0): Year: 2009  Week: 11
[    17.911] (II) VESA(0): EDID Version: 1.3
[    17.911] (II) VESA(0): Analog Display Input,  Input Voltage Level: 0.700/0.700 V
[    17.911] (II) VESA(0): Sync:  Separate  SyncOnGreen
[    17.911] (II) VESA(0): Max Image Size [cm]: horiz.: 41  vert.: 23
[    17.911] (II) VESA(0): Gamma: 2.20
[    17.911] (II) VESA(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[    17.911] (II) VESA(0): First detailed timing is preferred mode
[    17.911] (II) VESA(0): redX: 0.641 redY: 0.334   greenX: 0.301 greenY: 0.608
[    17.911] (II) VESA(0): blueX: 0.145 blueY: 0.073   whiteX: 0.313 whiteY: 0.329
[    17.911] (II) VESA(0): Supported established timings:
[    17.911] (II) VESA(0): 720x400@70Hz
[    17.911] (II) VESA(0): 640x480@60Hz
[    17.911] (II) VESA(0): 640x480@75Hz
[    17.911] (II) VESA(0): 800x600@60Hz
[    17.911] (II) VESA(0): 800x600@75Hz
[    17.911] (II) VESA(0): 832x624@75Hz
[    17.911] (II) VESA(0): 1024x768@60Hz
[    17.911] (II) VESA(0): 1024x768@75Hz

--- End code ---
..it looks like the maximum resolution your display supports is 1024x768?

--- End quote ---

LG W1943SS
Resolution 1366*768 (Max)
https://www.lg.com/hk_en/monitor/lg-W1943SS-PF-office

Juanito:
As @Rich says, load the xf86-video-ati extension, exit to the console prompt, "startx" and look at /var/log/Xorg.0.log again.

xor:

--- Quote from: Juanito on June 14, 2019, 04:26:07 AM ---As @Rich says, load the xf86-video-ati extension, exit to the console prompt, "startx" and look at /var/log/Xorg.0.log again.

--- End quote ---

AMD A4-5300 APU with AMD Radeon HD 7480D graphics

TinyCorePure64-10.1.iso



Attachments ;
Xorg.0.log


--- Code: ---[    18.318] (II) VESA(0): Printing DDC gathered Modelines:
[    18.319] (II) VESA(0): Modeline "1360x768"x0.0   85.50  1360 1424 1536 1792  768 771 777 795 +hsync +vsync (47.7 kHz eP)
--- End code ---

can't change resolution :(

[attachment deleted by admin]

Juanito:
xf86-video-ati is the correct driver, but it is unloaded for some reason - perhaps you need the graphics-4.19.10-tinycore64 extension to be loaded or, if that doesn't help, Xorg-7.7-3d.

Note that using the amd drivers and firmware is not going to work and using the TinyCorePure64 iso instead of the CorePure64 iso does not help either.

Try CorePure64-10.1 + graphics-4.19.10-tinycore64 + Xorg-7.7 + xf86-video-ati + flwm + wbar + aterm

Navigation

[0] Message Index

[#] Next page

[*] Previous page