Welcome
|
FAQ
|
Downloads
|
Wiki
Tiny Core Linux
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email
?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
Community gatherings on Freenode at
#tinycorelinux
(
webchat
)
Home
Help
Login
Register
Tiny Core Linux
»
Tiny Core Base
»
Raspberry Pi
»
Using the Raspberry Pi camera on a CM1
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: Using the Raspberry Pi camera on a CM1 (Read 2157 times)
Zephyrus
Newbie
Posts: 6
Using the Raspberry Pi camera on a CM1
«
on:
February 07, 2019, 08:42:51 PM »
Hi people,
I'm trying to use the RPI camera V2.1 on the CM1 module using the CM IO board. I've connected up the camera to the CAM 1 port as per this piece of documentation :
https://www.raspberrypi.org/documentation/hardware/computemodule/cmio-camera.md
I've also pull in the dt-blob.bin (will their default one work correctly?) file from their link and installed rpi-vc.tcz. I've also modified the config.txt file with:
start_x=1
disable_camera_LED=1
gpu_mem=128
When I run "sudo vcgencmd get_camera" I get "supported=1 detected=0".
I also fail on taking a picture, with an error stating it's not detecting the camera.
What do I need to change to get it to detect and use the camera?
Logged
Juanito
Administrator
Hero Member
Posts: 14850
Re: Using the Raspberry Pi camera on a CM1
«
Reply #1 on:
February 08, 2019, 02:41:52 AM »
see the last post here:
http://forum.tinycorelinux.net/index.php/topic,20476.0.html#lastPost
Logged
Zephyrus
Newbie
Posts: 6
Re: Using the Raspberry Pi camera on a CM1
«
Reply #2 on:
February 10, 2019, 08:54:16 PM »
Thanks, turns out the problem was two-fold. I2C was enabled and the cable was defective.
Logged
Print
Pages: [
1
]
Go Up
« previous
next »
Tiny Core Linux
»
Tiny Core Base
»
Raspberry Pi
»
Using the Raspberry Pi camera on a CM1