Request: Recompile dCore-xenial to use more than 4 serial ports

dCore Import Debian Packages to Mountable SCE extensions > dCore X86

(1/2) > >>

Mzem:
Hello,

I hope I can request this here.

I was trying to recompile kernel for the dCore-xenial, but with no success. Can someone help me out.
I added
--- Code: ---8250.nr_uarts=8
--- End code ---
in to the extlinux.conf but the system don't recognize 4 new serial ports that were added.

I presume that I need to recomplie the kernel and add
--- Code: ---CONFIG_SERIAL_8250_NR_UARTS=32
CONFIG_SERIAL_8250_RUNTIME_UARTS=8
--- End code ---
to the new kernel.

I will appreciate a lot, if anyone can give me some link how to do it or maybe could someone recompile the kernel for me?

Best regards!

Mzem:
I have solve this problem.

No I would like to make a module, but got this error:

--- Code: ---make -C /lib/modules/`uname -r`/build SUBDIRS= modules
make[1]: *** /lib/modules/4.2.9-tinycore/build: No such file or directory. Stop.
Makefile:15: recipe for target 'build' failed
make: *** [build] Error 2

--- End code ---

I did a research and found out that I need
--- Code: ---linux-kernel-sources-env
--- End code ---
but I couldn't imported in dCore. Is there another way to make it and than use it in dCore?

Jason W:
Besides the package build-essential, you need the kernel source below if you are not already. Also, start with the config that enables devtmpfs. The README provides some basic info:

http://tinycorelinux.net/dCore/x86/import/src/kernel-4.2.9/linux-4.2.9-patched.tar.xz
http://tinycorelinux.net/dCore/x86/import/src/kernel-4.2.9/config-4.2.9-tinycore-devtmpfs
http://tinycorelinux.net/dCore/x86/import/src/kernel-4.2.9/README

The kernel for dCore-xenial was built on Tinycore 7.x, so you would need to build on that if you want to use kernel module packages in the dCore prebuilt repo or simply use the resulting module. If you want to just use the resulting bzImage (vmlinuz) and modules you build then you can compile on dCore-xenial.

Starting with the 4.8.17-tinycore kernel found in dCore-stretch and dCore-zesty, it was built on dCore-stretch. Future kernel updates will also be built on a dCore port, will be the most recent Debian one at that time.

also create the build and source symlinks:

mkdir /usr/src
ln -sf /path/to/linux-4.2.9-patched /usr/src/linux
ln -sf /usr/src/linux /lib/modules/4.2.9-tinycore/build
ln -sf /usr/src/linux /lib/modules/4.2.9-tinycore/source

Mzem:
I followed your tips, but it didn't work. I got just the black screen at boot with no error.

I first create the build and source symlinks. Then extraxt linux-4.2.9-patched.txz. Then run make command in the directory of drivers which I want to have. Then I followed the README file. Got the bzImage and put it in extlinux.conf.
Did I do something wrong?

Jason W:
I have built the module and uploaded it to the repo. Built in Core 7.x as was the 4.2.9 kernel. The name of it is:

adv17v35x-modules-4.2.9-tinycore

Please install it and test. I don't have the hardware, but dmesg gives the below output when the module is loaded on dCore-xenial:

--- Code: ---
===============================================================
[ 785.218734] Advantech PCIe (17V35x) Serial Device Drivers.
[ 785.218736] Product V5.0.2.0 [2016/08/29]
File V5.0.2.0
[ 785.218738] Supports: RS232/422/485 auto detection and setting
[ 785.218740] Devices: ICOM: PCIE-1602, PCIE-1604
PCIE-1610, PCIE-1612
PCIE-1620, PCIE-1622
PCM_3612I
PCI-1602, PCI-1604
PCI-1610, PCI-1612
PCI-1620, PCI-1622
[ 785.218742] Advantech Industrial Automation Group.
[ 785.218744] ===============================================================

--- End code ---

Navigation

[0] Message Index

[#] Next page

Go to full version