Tiny Core Base > Other architectures

piCore for the H3 boards - Orange Pi, Nano Pi etc.

<< < (7/14) > >>

nxtv2.0:
How do i enter those commands , the ethernet isn't working.

jgrulich:
Use the serial debug console and copy the output via the clipboard.

nxtv2.0:
I dont have a serial reader currently.
Can't you include a start-up script to log the dmesg to the fat32 partition?

sorry for inconvienice.

jgrulich:
Than use the keyboard and monitor to interface with.
I've modified the script bin to work with the HDMI-DVI interface, means that you may use any old-fashioned monitor, even with the 3:4 ratio as I'm using.

jgrulich:
If Armbian is working well, I've used it's kernel with adopted related files.
Try to replace these files on the SD card:
https://dl.dropboxusercontent.com/u/86461636/Rev2/boot.scr
https://dl.dropboxusercontent.com/u/86461636/Rev2/script.bin
https://dl.dropboxusercontent.com/u/86461636/Rev2/zImage

Navigation

[0] Message Index

[#] Next page

[*] Previous page