piCore for the H3 boards - Orange Pi, Nano Pi etc.

[nxtv2.0]

Didn't work same as before

[nxtv2.0]

Didn't work ,same as before.

[nxtv2.0]

Didn't work.
same as before.

[jgrulich]

Sorry, don't have the board to test with.

[nxtv2.0]

Sorry for posting multible times, was an accident.

What is needed to support the giagbit controller?
I xan help you develop one , any image you want me to test i will accept.

[jgrulich]

Use the steps as I've described in you post:
http://forum.tinycorelinux.net/index.php/topic,20426.msg127344.html#msg127344

That's the fastest way, because than you have something working at the beginning and you may revert steps it it stop working.
The opposite way, means to use try / fail method is quite time consuming because you test it as a blind men.

[jgrulich]

Install this distro: http://www.armbian.com/orange-pi-plus-2e/
and post the dmesg with the ethernet info.
I have the source files for the 3.4.112 kernel and therefor may use it for our purpose easily.

[nxtv2.0]

Ok i was allready using armbian .
will post shortly.

[nxtv2.0]

Command i used:

Code: [Select]

dmesg > log.txtLink to File:
https://drive.google.com/file/d/0BxEtx0o2OWjmTHJfX1pvLTQ4djA/view?usp=drivesdk
Hope it helps,if you need anything else just say.

Thanks.

[jgrulich]

Strange, it uses the same gmac0 as for internal 100MB port.
Please test my version and post the dmesg to see the error messages about the gmac.

[jgrulich]

Maybe I got it,

use the kernel,I've sent last time, and overwrite the script.bin:
https://dl.dropboxusercontent.com/u/86461636/script.bin

Regards,

Jan

[nxtv2.0]

I can't find the image on my pc and the dropbox link is broken.

[nxtv2.0]

I mean the kernel no the image.

[nxtv2.0]

And please add a script that automatically saves the output of dmesg to a file in the fat32 partition because i can't access the pi without ethernet working. 

[jgrulich]

Once more the link to the zImage and script.bin:
https://dl.dropboxusercontent.com/u/86461636/zImage
https://dl.dropboxusercontent.com/u/86461636/script.bin

To save the dmesg:

Code: (bash) [Select]

mount /mnt/mmcblk0p1
sudo dmesg > /mnt/mmcblk0p1/log.txt