Tiny Core Base > TCB Q&A Forum

wifi firmware

<< < (2/2)

Juanito:
After loading them both manually, can you paste the output from "lsmod" and the last ten lines of "dmesg" here?

atmos:
LSMOD:


--- Code: ---tc@box:~$ lsmod
Module                  Size  Used by    Tainted: P 
cpufreq_stats          12288  0
cpufreq_conservative    12288  0
cpufreq_userspace      12288  0
cpufreq_powersave      12288  0
wl                   6025216  0
serio_raw              12288  0
cfg80211              135168  1 wl
squashfs               24576 128
lz4_decompress         12288  1 squashfs
loop                   16384 256
ppdev                  12288  0
pcspkr                 12288  0
8250_fintek            12288  0
parport_pc             24576  0
parport                28672  2 ppdev,parport_pc
wmi                    12288  0
xhci_pci               12288  0
xhci_hcd               73728  1 xhci_pci
r8169                  49152  0
acpi_cpufreq           12288  0
mii                    12288  1 r8169
tc@box:~$
--- End code ---

DMESG:


--- Code: ---EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
scsi 6:0:0:0: Direct-Access     Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 0 CCS
sd 6:0:0:0: Attached scsi generic sg1 type 0
sd 6:0:0:0: [sdb] 2015232 512-byte logical blocks: (1.03 GB/984 MiB)
sd 6:0:0:0: [sdb] Write Protect is off
sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00
sd 6:0:0:0: [sdb] No Caching mode page found
sd 6:0:0:0: [sdb] Assuming drive cache: write through
 sdb:
sd 6:0:0:0: [sdb] Attached SCSI removable disk
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
scsi 7:0:0:0: Direct-Access     Mass     Storage Device        PQ: 0 ANSI: 0 CCS
sd 7:0:0:0: Attached scsi generic sg2 type 0
sd 7:0:0:0: [sdc] Attached SCSI removable disk
clocksource: Switched to clocksource tsc
floppy0: no floppy controllers found
random: nonblocking pool is initialized
EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
wl: module license 'MIXED/Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
floppy0: no floppy controllers found
mtrr: base or size exceeds the MTRR width
floppy0: no floppy controllers found
work still pending
floppy0: no floppy controllers found
r8169 0000:03:00.0: Direct firmware load for rtl_nic/rtl8168g-2.fw failed with error -2
r8169 0000:03:00.0: Falling back to user helper
r8169 0000:03:00.0 eth0: unable to load firmware patch rtl_nic/rtl8168g-2.fw (-11)
r8169 0000:03:00.0 eth0: link down
r8169 0000:03:00.0 eth0: link down
r8169 0000:03:00.0 eth0: link up
--- End code ---

coreplayer2:
Just my quick observation.. 

wl module is already loaded and running

I don't think you can load two wifi devices simultaneously.. 

r8169 is an nic (Ethernet) device right not a wifi device ??

Besides, both r8169 (Ethernet) and wl (wifi)  modules are already loaded

:p

Navigation

[0] Message Index

[*] Previous page