Tiny Core Base > piCore Test Releases

piCore-8.0beta2

<< < (5/5)

bzfrp:
Hello,
I can't find alsa-dev.tcz

Paul_123:

--- Quote from: sbp on June 23, 2016, 11:30:15 AM ---Hi Bela.

I have been working with beta2 for some time and it working fine.

I have one issue. The command sudo alsactl store does not work results in:

--- Code: ---tc@piCorePlayer:~$ sudo alsactl store
alsactl: save_state:1626: Cannot open /var/lib/alsa/asound.state for writing: No such file or directory

--- End code ---

Usually we have also installed alsa-config but that is not available on 8.0 yet.
I did install ALSA.tzc and alsa-utils.tcz ands also tried alsa-plugins.tzc - but still I get this error.

Steen

--- End quote ---

Steen, do a file comparison between 7.x alsa and 8.x alsa.   From what I can see everything that used to be separate in alsa-config is now included in alsa.tcz or alsa-utils.tcz. 

Once you save the state, and add it to your backup, the directory and asound.state will be created during the restore.

bmarkus:

--- Quote from: bzfrp on June 24, 2016, 10:48:17 AM ---Hello,
I can't find alsa-dev.tcz

--- End quote ---

Install libasound-dev.tcz

sbp:
Hi Bela

The problem I had with the touch function on the official touchscreen was caused by a new option you enabled in config.txt.
As soon as I removed
i2c_vc=on
then the touch-function was working again.

From the raspberry git I read:
https://github.com/raspberrypi/firmware/blob/master/boot/overlays/README

i2c_vc (default "off")   Set to "on" to enable the i2c interface usually reserved for the VideoCore processor.
So by default it should be off. In addition the VideoCore is not even present in vanilla piCore, so I think it would be safe to remove from config.txt

Regards
Steen

bmarkus:
Hi Steen

thanks, will change config.txt

Navigation

[0] Message Index

[*] Previous page