dCore Import Debian Packages to Mountable SCE extensions > dCore Armv7

sce-load is not working

(1/2) > >>

herschel:
Hi Gents

I manage to get my Marsboard A20 to boot with dCore (uCore) and boots with an awesome speed (fantastic!). This is a microSD card booting.

my boot.scr, uCore, uImage, script.bin files are in fat partition (mmcblk0p1). I created a TCE on mmcblk0p2 by using "tce-setdrive". I managed to import extensions using sce-import. Up to this point it works well.

My issue is when I try to load the extension using "sce-load <package>" I get an error as follows,

mount: mounting /dev/loop0 on /tmp/tcloop/<package> failed: no such device

when I do "sce-load <package>" the second time it says "<package> already Installed"

Inside /tmp/tcloop there is a directory with the package name but it is empty

any suggestions?

curaga:
Your kernel lacks loop support.

Jason W:
Is this seen using the files from the below directory?

http://tinycorelinux.net/dCore/armv7/Allwinner-A20/

herschel:
From the link I used only uCore and boot.scr. Instead of zImage I used uImage built by me because I wants i2s support. I have included loop support in the kernel but CRYPTO was not enabled. I compiled a kernel with CRYPTO and will test this.

herschel:
I tried the files in the aforesaid link. The board boots but no display. Btw I am using VGA monitor and also tried HDMI. Does this support VGA?

Navigation

[0] Message Index

[#] Next page