WelcomeWelcome | FAQFAQ | DownloadsDownloads | WikiWiki

Author Topic: Edimax 7811UTC Dual Band Wireless USB Adapter  (Read 4917 times)

Offline yeme

  • Newbie
  • *
  • Posts: 21
Edimax 7811UTC Dual Band Wireless USB Adapter
« on: November 27, 2015, 06:33:41 PM »
I would like to use this adapter for the 5GHz advantage on my network and need help and direction on getting this going with PiCore.  I have successfully installed and used it on my RPi setup.  The rtl drivers show 8812_au and 8821_au for the device.

This is my lsusb:

Quote
Bus 001 Device 004: ID 7392:a812 Edimax Technology Co., Ltd
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter
Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. SMC9514 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

My current test PiCore  setup is B+ running 7-alpha-8 (this is the one I just setup the bridged eth0 to wlan0 on with the forum's help)

« Last Edit: November 27, 2015, 06:56:02 PM by yeme »

Offline Paul_123

  • Administrator
  • Hero Member
  • *****
  • Posts: 1237
Re: Edimax 7811UTC Dual Band Wireless USB Adapter
« Reply #1 on: November 27, 2015, 07:06:10 PM »
Troubleshooting wifi drivers is hard, since there are so many different chips.  And we don't all have the same ones.  I only have the EW7811Un version.

Boot the system, then plug in the wifi stick.

Post the messages at the end of dmesg and lsmod.  Do that for the working raspbian system, then for piCore.  Also, what is your kernel version in raspbian?

As for speed, not sure you will notice much of a benefit from the 5Ghz range.  Network throughput is still pretty crypled from the usb.

Offline yeme

  • Newbie
  • *
  • Posts: 21
Re: Edimax 7811UTC Dual Band Wireless USB Adapter
« Reply #2 on: November 27, 2015, 07:39:24 PM »
Hi Paul_123!

Working RPi   3.18.11+ #781 PREEMPT Tue Apr 21 18:02:18 BST 2015
lsusb:

Quote
Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp.
Bus 001 Device 004: ID 7392:a812 Edimax Technology Co., Ltd

dmesg:

Quote
[    2.704443] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[    2.713170] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.725275] hub 1-1:1.0: USB hub found
[    2.732207] hub 1-1:1.0: 5 ports detected
[    3.013952] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    3.134339] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[    3.143265] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.160967] smsc95xx v1.0.4
[    3.232292] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:e5:fc:bf
[    3.344047] usb 1-1.2: new high-speed USB device number 4 using dwc_otg
[    3.465005] usb 1-1.2: New USB device found, idVendor=7392, idProduct=a812
[    3.483938] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.493351] usb 1-1.2: Product: Edimax AC600 USB
[    3.512513] usb 1-1.2: Manufacturer: Realtek
[    3.521496] usb 1-1.2: SerialNumber: 00e04c000001
[    4.389463] udevd[159]: starting version 175
[    6.236876] cfg80211: Calling CRDA to update world regulatory domain
[    7.503186] RTL871X: module init start
[    7.670523] RTL871X: rtl8821au v4.3.14_13455.20150212_BTCOEX20150128-51
[    7.757982] RTL871X: build time: Sep 11 2015 21:08:39
[    7.811304] RTL871X: rtl8821au BT-Coex version = BTCOEX20150128-51
[    8.090050] random: nonblocking pool is initialized
[    8.249147] RTL871X: rtw_ndev_init(wlan0)
[    8.260799] usbcore: registered new interface driver rtl8821au
[    8.268676] RTL871X: module init ret=0
[   11.239424] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[   11.661615] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[   21.700075] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[   23.354982] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
[   25.213452] cfg80211: Calling CRDA to update world regulatory domain
[   25.237823] RTL871X: rtw_set_802_11_connect(wlan0)  fw_state=0x00000008
[   25.578811] RTL871X: start auth
[   25.580552] RTL871X: auth success, start assoc
[   25.582889] RTL871X: assoc success
[   25.583306] cfg80211: Calling CRDA to update world regulatory domain
[   25.938811] RTL871X: send eapol packet
[   25.943383] RTL871X: send eapol packet
[   25.945974] RTL871X: set pairwise key camid:4, addr:1c:87:2c:d3:1b:2c, kid:0, type:AES
[   25.953223] RTL871X: set group key camid:5, addr:1c:87:2c:d3:1b:2c, kid:1, type:AES
[   32.553201] Adding 102396k swap on /var/swap.  Priority:-1 extents:2 across:2134012k SSFS


PiCore  4.1.12-piCore+ #1 PREEMPT Wed Nov 4 11:36:19 CET 2015

lsusb:

Quote
Bus 001 Device 004: ID 7392:a812 Edimax Technology Co., Ltd
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. SMSC9512/9514 Fast Ethernet Adapter
Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp. SMC9514 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

dmesg:

Quote
[   68.305312] usb 1-1.4: new high-speed USB device number 4 using dwc_otg
[   68.407290] usb 1-1.4: New USB device found, idVendor=7392, idProduct=a812
[   68.407326] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber                                          =3
[   68.407349] usb 1-1.4: Product: Edimax AC600 USB
[   68.407367] usb 1-1.4: Manufacturer: Realtek
[   68.407384] usb 1-1.4: SerialNumber: 00e04c000001


The working driver for the RPi was a "custom driver" for the kernel put together by a forum member Mr. Engman:

https://www.raspberrypi.org/forums/viewtopic.php?f=66&t=66499&start=75






Offline Paul_123

  • Administrator
  • Hero Member
  • *****
  • Posts: 1237
Re: Edimax 7811UTC Dual Band Wireless USB Adapter
« Reply #3 on: November 28, 2015, 09:31:36 AM »
Dealing with an out of tree driver is going to be problematic.  Every time the kernel changes, the driver will need to be manually built and changed.   I don't think Bella is maintaining any sources out of the official rpi kernel tree.

So that is going to mean that we have to manually build the driver for a given kernel.  Similar to what is described in the thread.   

Offline yeme

  • Newbie
  • *
  • Posts: 21
Re: Edimax 7811UTC Dual Band Wireless USB Adapter
« Reply #4 on: November 28, 2015, 10:19:19 AM »
Thanks for looking Paul_123

I just noticed I showed lsusb and not lsmod as requested above, so I have posted below the lsmod and dmesg for both systems (working RPi and the PiCore).

Working RPi

lsmod:

Quote
Module                  Size  Used by
snd_bcm2835            21149  0
snd_pcm                90778  1 snd_bcm2835
snd_seq                61097  0
snd_seq_device          7209  1 snd_seq
snd_timer              23007  2 snd_pcm,snd_seq
snd                    66325  5 snd_bcm2835,snd_timer,snd_pcm,snd_seq,snd_seq_device
8812au               1761362  0
cfg80211              462846  1 8812au
rfkill                 22347  2 cfg80211
uio_pdrv_genirq         3666  0
uio                     9897  1 uio_pdrv_genirq

dmesg

Quote
3.134536] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[    3.143457] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.161248] smsc95xx v1.0.4
[    3.232413] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:e5:fc:bf
[    3.344028] usb 1-1.2: new high-speed USB device number 4 using dwc_otg
[    3.465032] usb 1-1.2: New USB device found, idVendor=7392, idProduct=a812
[    3.483998] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.493410] usb 1-1.2: Product: Edimax AC600 USB
[    3.512059] usb 1-1.2: Manufacturer: Realtek
[    3.520953] usb 1-1.2: SerialNumber: 00e04c000001
[    4.396207] udevd[159]: starting version 175
[    6.336225] cfg80211: Calling CRDA to update world regulatory domain
[    7.620196] RTL871X: module init start
[    7.713300] RTL871X: rtl8821au v4.3.14_13455.20150212_BTCOEX20150128-51
[    7.794044] RTL871X: build time: Sep 11 2015 21:08:39
[    7.801088] RTL871X: rtl8821au BT-Coex version = BTCOEX20150128-51
[    8.062070] random: nonblocking pool is initialized
[    8.241772] RTL871X: rtw_ndev_init(wlan0)
[    8.253485] usbcore: registered new interface driver rtl8821au
[    8.261362] RTL871X: module init ret=0
[   11.222886] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[   11.675870] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[   21.724618] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[   23.379194] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
[   25.232910] cfg80211: Calling CRDA to update world regulatory domain
[   25.255684] RTL871X: rtw_set_802_11_connect(wlan0)  fw_state=0x00000008
[   25.638185] RTL871X: start auth
[   25.639918] RTL871X: auth success, start assoc
[   25.642282] RTL871X: assoc success
[   25.642686] cfg80211: Calling CRDA to update world regulatory domain
[   26.512085] RTL871X: send eapol packet
[   26.517797] RTL871X: send eapol packet
[   26.518523] RTL871X: set pairwise key camid:4, addr:1c:87:2c:d3:1b:2c, kid:0, type:AES
[   26.527128] RTL871X: set group key camid:5, addr:1c:87:2c:d3:1b:2c, kid:1, type:AES
[   33.016281] Adding 102396k swap on /var/swap.  Priority:-1 extents:2 across:2134012k SSFS

PiCore

Quote
Module                  Size  Used by    Not tainted
ipv6                  364197 12 [permanent]
i2c_dev                 6686  0
spi_bcm2835             7880  0
bcm2835_gpiomem         3703  0
i2c_bcm2708             6156  0
uio_pdrv_genirq         3670  0
uio                    10078  1 uio_pdrv_genirq

dmesg:

Quote
[  593.165336] usb 1-1.2: new high-speed USB device number 4 using dwc_otg
[  593.267219] usb 1-1.2: New USB device found, idVendor=7392, idProduct=a812
[  593.267254] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  593.267274] usb 1-1.2: Product: Edimax AC600 USB
[  593.267292] usb 1-1.2: Manufacturer: Realtek
[  593.267313] usb 1-1.2: SerialNumber: 00e04c000001

Quote
So that is going to mean that we have to manually build the driver for a given kernel.


Do you have any examples of doing this that I could review and try to learn?   











Offline Paul_123

  • Administrator
  • Hero Member
  • *****
  • Posts: 1237
Re: Edimax 7811UTC Dual Band Wireless USB Adapter
« Reply #5 on: November 28, 2015, 10:54:27 AM »
Have you built kernels before?

The source and symbols from the current version of piCore is
http://tinycorelinux.net/7.x/armv6/releases/RPi/src/kernel/  For armv6

Offline yeme

  • Newbie
  • *
  • Posts: 21
Re: Edimax 7811UTC Dual Band Wireless USB Adapter
« Reply #6 on: November 28, 2015, 07:34:40 PM »
I have not but will review the literature available.

Offline Paul_123

  • Administrator
  • Hero Member
  • *****
  • Posts: 1237
Re: Edimax 7811UTC Dual Band Wireless USB Adapter
« Reply #7 on: November 29, 2015, 05:30:57 PM »
For future reference, the driver is located
 
https://github.com/gnab/rtl8812au

Bela.....seems that your method of archiving the kernel source, Module.symvers and System map are working well for compiling out of tree modules.   Thx.

Offline bmarkus

  • Administrator
  • Hero Member
  • *****
  • Posts: 7183
    • My Community Forum
Re: Edimax 7811UTC Dual Band Wireless USB Adapter
« Reply #8 on: November 30, 2015, 01:37:33 AM »
Paul, can you send a tcz pack for the repo(s)?
Béla
Ham Radio callsign: HA5DI

"Amateur Radio: The First Technology-Based Social Network."

Offline Paul_123

  • Administrator
  • Hero Member
  • *****
  • Posts: 1237
Re: Edimax 7811UTC Dual Band Wireless USB Adapter
« Reply #9 on: November 30, 2015, 08:26:17 AM »
Paul, can you send a tcz pack for the repo(s)?

I can do that.   I wasn't sure if you wanted to deal with the out of tree kernel module on the repos.

Offline bmarkus

  • Administrator
  • Hero Member
  • *****
  • Posts: 7183
    • My Community Forum
Re: Edimax 7811UTC Dual Band Wireless USB Adapter
« Reply #10 on: November 30, 2015, 08:29:03 AM »
No I do not want to deal with modules already built by others and I can't test due to lack of hardware :)
Béla
Ham Radio callsign: HA5DI

"Amateur Radio: The First Technology-Based Social Network."