WelcomeWelcome | FAQFAQ | DownloadsDownloads | WikiWiki

Author Topic: Scripts to download and convert debian packages  (Read 7400 times)

Offline aswjh

  • Jr. Member
  • **
  • Posts: 85
Scripts to download and convert debian packages
« on: March 31, 2015, 06:32:59 AM »
Hi, Everyone, I made two scripts to download and convert debian packages, may be useful for all of us.
Usage: put them into tce/ondemand, and run "dpm pick" to pick out a fastest mirror,
now you can use "dpm -wi" to get the packages that interest you :)

Offline aswjh

  • Jr. Member
  • **
  • Posts: 85
Re: Scripts to download and convert debian packages
« Reply #1 on: August 26, 2015, 03:02:46 AM »
new version:
Version: 1.1
Usage: dpm [ mirror update config upgrade clean (link/link clear) ]
       dpm [ -i -ic -if -w -wi -d -D -r -s -u ] extensions
 mirror    Pick out a fastest mirror, specify a string to match: dpm mirror chin
 update  Update packages database
 config  Config ld.so.conf and dpm.rc(TCEDIR/dpkg)
 upgrade  Update all packages
 clean    Delete deb files downloaded
 link/link clear link to tce/optional or clear
 show    Show information of packages
  -i   Load local extension
  -c   Copy to file system when installing. If installed, copy again
  -f   Overwrite when installing. If installed, copy again
  -w   Download deb files and make tcz extension
  -d   Show depends
  -D   Show dependices
  -r   Show reverse dependices
  -s   Search packages
  -u   Update packages

Offline nitram

  • Hero Member
  • *****
  • Posts: 1054
Re: Scripts to download and convert debian packages
« Reply #2 on: August 27, 2015, 10:01:10 PM »
Hi aswjh.

Trying out v1.1 - thanks for your handiwork.

Mirror, search, config, dependencies, installation, loading worked well.

Like that it keeps it's extensions seperate from Tiny Core but this requires more storage. Leafpad and efax-gtk did not fit in my 100MB parition freespace and failed to install, even when deleting deb files after tcz conversion. Just installed nano, required ~55 MB drive space after deleting the .deb files, most of which is the packages database. Guess installing additional software won't be as much an issue as the base gets fleshed out. Nano works great. Hoping to test this out on heavier software, such as qpdfview.

Is it possible to specify /dpkg creation into a different paritition?

Is there an issue with extension conflict? Example, running both a Tiny Core and dpm extension at the same time that both rely on their own versions of ncurses.

Kind of a hybrid between Tiny Core and dCore, not sure yet where it fits...maybe have your cake and eat it too :)

Offline aswjh

  • Jr. Member
  • **
  • Posts: 85
Re: Scripts to download and convert debian packages
« Reply #3 on: August 28, 2015, 01:37:33 AM »
Is it possible to specify /dpkg creation into a different paritition?

Can use:  TCEDIR="/mnt/sdaxx/yyy" dpm -w xxx
or: export TCEDIR="/mnt/sdaxx/yyy"

Is there an issue with extension conflict? Example, running both a Tiny Core and dpm extension at the same time that both rely on their own versions of ncurses.

Yes, errors may be occurred.

Some packages need option "-c", for example, binutils,gcc,gcc-5,g++-5,python,perl-base,audacious.
Good luck :)


Offline nitram

  • Hero Member
  • *****
  • Posts: 1054
Re: Scripts to download and convert debian packages
« Reply #4 on: August 28, 2015, 01:37:48 PM »
Hi aswjh,

I linked dpkg/ to a roomier partition so all is good, thanks for providing options.

You may want to include notification to load squashfs-tools before installing through dpm to avoid errors/having to restart.

Test installed games-minesweeper and it did not provide a working executable in /bin, unsure why.

Test installed qpdfview, it gave numerous errors and would not run. Clipped for your review.

Any other suggestions please let me know - thanks.

Code: [Select]
tc@box:/tmp$ dpm -wi qpdfview
Warning loop dependency: libc6
Warning loop dependency: libc6
Connecting to ftp.debian.org (130.89.148.12:80)
hicolor-icon-theme_0 100% |*******************************|  8600   0:00:00 ETA
/mnt/sdb3/tce/dpkg/debs/hicolor-icon-theme_0.13-1_all.deb: OK
.
.
.
Connecting to ftp.debian.org (130.89.148.12:80)
libpoppler-qt5-1_0.2 100% |*******************************|   137k  0:00:00 ETA
/mnt/sdb3/tce/dpkg/debs/libpoppler-qt5-1_0.26.5-3_i386.deb: OK
libpoppler-qt5-1_0.26.5-3_i386.tcz done
Connecting to ftp.debian.org (130.89.148.12:80)
qpdfview_0.4.14-1_i3 100% |*******************************|   373k  0:00:00 ETA
/mnt/sdb3/tce/dpkg/debs/qpdfview_0.4.14-1_i386.deb: OK
qpdfview_0.4.14-1_i386.tcz done
.
.
.
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
.
.
.
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libpcre16-3_8.35-7.1_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libicu55_55.1-4_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libffi6_3.2.1-3_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
No schema files found: doing nothing.
libglib2.0-0_2.44.1-1.1_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libqt5core5a_5.4.2+dfsg-8_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libqt5sql5_5.4.2+dfsg-8_i386.tcz: OK
libqt5sql5-sqlite_5.4.2+dfsg-8_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libqt5xml5_5.4.2+dfsg-8_i386.tcz: OK
libx11-data_1.6.3-1_all.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libxdmcp6_1.1.2-1_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libxau6_1.0.8-1_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libxcb1_1.10-3+b1_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libx11-6_1.6.3-1_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libxrender1_0.9.8-1+b1_i386.tcz: OK
xkb-data_2.14-1_all.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libxkbcommon0_0.5.0-1_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libxcb-xkb1_1.10-3+b1_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libxkbcommon-x11-0_0.5.0-1_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libxext6_1.3.3-1_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libxi6_1.7.4-1+b2_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libxcb-xfixes0_1.10-3+b1_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libxcb-sync1_1.10-3+b1_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libxcb-shm0_1.10-3+b1_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libxcb-shape0_1.10-3+b1_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libxcb-render0_1.10-3+b1_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libxcb-render-util0_0.3.9-1_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libxcb-randr0_1.10-3+b1_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libxcb-keysyms1_0.4.0-1_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libxcb-util0_0.3.8-3_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libxcb-image0_0.4.0-1_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libxcb-icccm4_0.4.1-1_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libxcb-glx0_1.10-3+b1_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libx11-xcb1_1.6.3-1_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libcap2_2.24-11_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libudev1_224-2_i386.tcz: OK
sensible-utils_0.0.9_all.tcz: OK
debianutils_4.5.1_i386.tcz: OK
libaudit-common_2.4.4-1_all.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libaudit1_2.4.4-1_i386.tcz: OK
debconf: unable to initialize frontend: Dialog
debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 76.)
debconf: falling back to frontend: Readline
debconf: unable to initialize frontend: Readline
debconf: (Can't locate Term/ReadLine.pm in @INC (you may need to install the Term::ReadLine module) (@INC contains: /etc/perl /usr/local/lib/i386-linux-gnu/perl/5.20.2 /usr/local/share/perl/5.20.2 /usr/lib/i386-linux-gnu/perl5/5.20 /usr/share/perl5 /usr/lib/i386-linux-gnu/perl/5.20 /usr/share/perl/5.20 /usr/local/lib/site_perl .) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 7.)
debconf: falling back to frontend: Teletype
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libpam0g_1.1.8-3.1_i386.tcz: OK
libpam-modules-bin_1.1.8-3.1_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libdb5.3_5.3.28-11_i386.tcz: OK
dpkg: error while loading shared libraries: libselinux.so.1: cannot open shared object file: No such file or directory
dpkg: error while loading shared libraries: libselinux.so.1: cannot open shared object file: No such file or directory
libpam-modules_1.1.8-3.1_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libustr-1.0-1_1.0.4-5_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libsepol1_2.3-2_i386.tcz: OK
libsemanage-common_2.3-1_all.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libsemanage1_2.3-1+b2_i386.tcz: OK
dpkg: error while loading shared libraries: libselinux.so.1: cannot open shared object file: No such file or directory
/usr/local/postinst/passwd_4.2-3_i386: line 37: getent: not found
groupadd: error while loading shared libraries: libaudit.so.1: cannot open shared object file: No such file or directory
Group ID 42 has been allocated for the shadow group.  You have either
used 42 yourself or created a shadow group with a different ID.
Please correct this problem and reconfigure with dpkg --configure passwd''.

Note that both user and group IDs in the range 0-99 are globally
allocated by the Debian project and must be the same on every Debian
system.
pwck: error while loading shared libraries: libselinux.so.1: cannot open shared object file: No such file or directory
grpck: error while loading shared libraries: libselinux.so.1: cannot open shared object file: No such file or directory
pwconv: error while loading shared libraries: libselinux.so.1: cannot open shared object file: No such file or directory
grpconv: error while loading shared libraries: libselinux.so.1: cannot open shared object file: No such file or directory
chown: unknown user/group root:shadow
Shadow passwords are now on.
passwd_4.2-3_i386.tcz: OK
/usr/local/postinst/libuuid1_2.26.2-9_i386: line 16: getent: not found
/usr/local/postinst/libuuid1_2.26.2-9_i386: line 27: getent: not found
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libuuid1_2.26.2-9_i386.tcz: OK
lsb-base_4.1+Debian14_all.tcz: OK
debconf: unable to initialize frontend: Dialog
debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 76.)
debconf: falling back to frontend: Readline
debconf: unable to initialize frontend: Readline
debconf: (Can't locate Term/ReadLine.pm in @INC (you may need to install the Term::ReadLine module) (@INC contains: /etc/perl /usr/local/lib/i386-linux-gnu/perl/5.20.2 /usr/local/share/perl/5.20.2 /usr/lib/i386-linux-gnu/perl5/5.20 /usr/share/perl5 /usr/lib/i386-linux-gnu/perl/5.20 /usr/share/perl/5.20 /usr/local/lib/site_perl .) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 7.)
debconf: falling back to frontend: Teletype
dpkg: error while loading shared libraries: libselinux.so.1: cannot open shared object file: No such file or directory
/usr/local/postinst/x11-common_7.7+9_all: line 696: update-rc.d: not found
x11-common_7.7+9_all.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libice6_1.0.9-1+b1_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libsm6_1.2.2-1+b1_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libdbus-1-3_1.8.20-1_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libqt5dbus5_5.4.2+dfsg-8_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libpng12-0_1.2.50-2+b2_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libmtdev1_1.1.5-1_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libjpeg62-turbo_1.4.1-2_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libgraphite2-3_1.2.4-3_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libfreetype6_2.5.2-4_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libharfbuzz0b_1.0.1-1_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libxxf86vm1_1.1.4-1_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libxshmfence1_1.2-1_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libxfixes3_5.0.1-2+b2_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libxdamage1_1.1.4-2+b1_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libxcb-present0_1.10-3+b1_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libxcb-dri3-0_1.10-3+b1_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libxcb-dri2-0_1.10-3+b1_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libglapi-mesa_10.6.4-1_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libexpat1_2.1.0-7_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libdrm2_2.4.64-1_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libgl1-mesa-glx_10.6.4-1_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libwayland-server0_1.8.1-1_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libwayland-client0_1.8.1-1_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libgbm1_10.6.4-1_i386.tcz: OK
fonts-dejavu-core_2.35-1_all.tcz: OK
coreutils_8.23-4_i386.tcz: OK
debconf: unable to initialize frontend: Dialog
debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 76.)
debconf: falling back to frontend: Readline
debconf: unable to initialize frontend: Readline
debconf: (Can't locate Term/ReadLine.pm in @INC (you may need to install the Term::ReadLine module) (@INC contains: /etc/perl /usr/local/lib/i386-linux-gnu/perl/5.20.2 /usr/local/share/perl/5.20.2 /usr/lib/i386-linux-gnu/perl5/5.20 /usr/share/perl5 /usr/lib/i386-linux-gnu/perl/5.20 /usr/share/perl/5.20 /usr/local/lib/site_perl .) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 7.)
debconf: falling back to frontend: Teletype
ucf_3.0030_all.tcz: OK
debconf: unable to initialize frontend: Dialog
debconf: (No usable dialog-like program is installed, so the dialog based frontend cannot be used. at /usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 76.)
debconf: falling back to frontend: Readline
debconf: unable to initialize frontend: Readline
debconf: (Can't locate Term/ReadLine.pm in @INC (you may need to install the Term::ReadLine module) (@INC contains: /etc/perl /usr/local/lib/i386-linux-gnu/perl/5.20.2 /usr/local/share/perl/5.20.2 /usr/lib/i386-linux-gnu/perl5/5.20 /usr/share/perl5 /usr/lib/i386-linux-gnu/perl/5.20 /usr/share/perl/5.20 /usr/local/lib/site_perl .) at /usr/share/perl5/Debconf/FrontEnd/Readline.pm line 7.)
debconf: falling back to frontend: Teletype
fontconfig-config_2.11.0-6.3_all.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libfontconfig1_2.11.0-6.3_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libegl1-mesa_10.6.4-1_i386.tcz: OK
Regenerating fonts cache... done.
fontconfig_2.11.0-6.3_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libqt5gui5_5.4.2+dfsg-8_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libqt5widgets5_5.4.2+dfsg-8_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libqt5svg5_5.4.2-3_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libkeyutils1_1.5.9-5+b1_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libkrb5support0_1.13.2+dfsg-2_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libk5crypto3_1.13.2+dfsg-2_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libcomerr2_1.42.13-1_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libkrb5-3_1.13.2+dfsg-2_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libgssapi-krb5-2_1.13.2+dfsg-2_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libtasn1-6_4.5-2_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libp11-kit0_0.23.1-3_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libnettle6_3.1.1-4_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libgmp10_6.0.0+dfsg-7_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libhogweed4_3.1.1-4_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libgnutls-deb0-28_3.3.17-1_i386.tcz: OK
libavahi-common-data_0.6.31-5_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libavahi-common3_0.6.31-5_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libavahi-client3_0.6.31-5_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libcups2_2.0.3-10_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libqt5printsupport5_5.4.2+dfsg-8_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libqt5concurrent5_5.4.2+dfsg-8_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libjbig0_2.1-3.1_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libtiff5_4.0.3-13_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libopenjpeg5_1.5.2-3.1_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
liblcms2-2_2.6-3+b3_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libpoppler46_0.26.5-3_i386.tcz: OK
ldconfig: skipping /usr/local/lib/libiw.so: No such file or directory
libpoppler-qt5-1_0.26.5-3_i386.tcz: OK
qpdfview_0.4.14-1_i386.tcz: OK

Code: [Select]
tc@box:/mnt/sdb4/dpkg/optional$ dpm -i libcups2_2.0.3-10_i386.tcz
libcups2_2.0.3-10_i386 is already installed!
tc@box:/mnt/sdb4/dpkg/optional$ qpdfview
qpdfview: error while loading shared libraries: libcups.so.2: cannot open shared object file: No such file or directory
« Last Edit: August 28, 2015, 01:40:23 PM by nitram »

Offline nitram

  • Hero Member
  • *****
  • Posts: 1054
Re: Scripts to download and convert debian packages
« Reply #5 on: August 28, 2015, 01:51:54 PM »
Just wanted to leave a more positive note. efax-gtk installed with several errors but runs. Have not yet tested with a fax modem, although everything looks good. This would have taken me days to figure out how to build myself. So i guess hit or miss. If you have any other troubleshooting suggestions regarding qpdfview please let me know.

Offline aswjh

  • Jr. Member
  • **
  • Posts: 85
Re: Scripts to download and convert debian packages
« Reply #6 on: August 28, 2015, 11:50:22 PM »
libcups.so is in /usr/lib/i386-linux-gnu,
add /usr/lib/i386-linux-gnu into /etc/ld.so.conf, then sudo ldconfig,
or set LD_LIBRARY_PATH,
or run: dpm config

Offline nitram

  • Hero Member
  • *****
  • Posts: 1054
Re: Scripts to download and convert debian packages
« Reply #7 on: August 29, 2015, 02:40:19 AM »
Thanks aswjh, 'dpm config' did the trick. Can't believe it, now running latest qpdfview v0.4.14 for tabbed-pdf on TC 6  :)

There's no way i could have built this myself - QT5 and a mile-long list of dependencies - your skills are awesomeness!

Offline numbercruncher

  • Newbie
  • *
  • Posts: 2
Re: Scripts to download and convert debian packages
« Reply #8 on: September 27, 2015, 06:33:36 PM »
hello asjwh

kudos to your programming skills.....

i'm trying to use these scripts to download tuxtype and klavaro.....using dpm -w tuxtype or klavaro successfully downloads and creates the tcz but when i try to load the extensions i'm getting a load of errors

could you help to troubleshoot where the load fails? it would be simpler if you attempted the convert as i'm struggling to make sense of what the errors are referring to

of course if needed i will paste the results from the terminal

thanks

Offline aswjh

  • Jr. Member
  • **
  • Posts: 85
Re: Scripts to download and convert debian packages
« Reply #9 on: September 28, 2015, 12:47:53 AM »
jessie is needed, now debain sid libs are too new for tc6:
run 'dpm config' first, then edit tce/dpkg/dpm.rc, set DEVNAME to jessie,
delete all debs,tczs of tuxtype and klavaro,
download and install again,
/usr/games/tuxtype and klavaro should work.

Offline numbercruncher

  • Newbie
  • *
  • Posts: 2
Re: Scripts to download and convert debian packages
« Reply #10 on: September 28, 2015, 04:57:05 AM »
excellent aswjh

i'd already tried those steps but was still getting the errors and as the game wasn't launching with the toolbar icon or the menu entry item, i thought there was a compilation issue.

i've just run it again for tuxtype and got the same errors (i think) but the game launched using the /usr/games/tuxtype filepath in the terminal

thanks for the quick response and resolution