lirc-0.9.2a(devinput) or lirc-0.9.0-pre1(default)

[bmarkus]

Compiling 9.0.0 configure requires to specify driver. Guess the correct is userspace:

Code: [Select]

  --with-driver=X         specify the driver to use, where X is one of:
                          all, none, userspace, accent, act200l,
                          act220l, adaptec, alsa_usb, animax, asusdh,
                          atilibusb, atiusb, atwf83, audio, audio_alsa
                          avermedia, avermedia_vdomate, avermedia98,
                          awlibusb, bestbuy, bestbuy2, breakoutbox,
                          bte, bw6130, caraca, chronos, commandir,
                          comX, cph06x, creative, creative_infracd,
                          devinput, dfclibusb, digimatrix, dsp, dvico, ea65,
                          exaudio, flyvideo, ftdi, gvbctv5pci,
                          hauppauge, hauppauge_dvb,
                          hercules_smarttv_stereo, i2cuser,
                          igorplugusb, iguanaIR, imon, imon_24g,
                          imon_knob, imon_lcd, imon_pad, imon_rsc,
                          irdeo, irdeo_remote, irlink, irman, irreal,
                          knc_one, kworld,
                          leadtek_0007, leadtek_0010, leadtek_pvr2000,
                          livedrive_midi, livedrive_seq, logitech,
                          lptX, macmini, mediafocusI,
                          mouseremote, mouseremote_ps2, mp3anywhere,
                          mplay, nslu2,packard_bell, parallel, pcmak,
                          pcmak_usb, pctv, pixelview_bt878,
                          pixelview_pak, pixelview_pro, provideo,
                          realmagic, remotemaster, sa1100, samsung,
                          sasem, sb0540, serial, silitek, sir, slinke,
                          srm7500libusb, tekram,
                          tekram_bt829, tira, tira_raw, ttusbir,
                          tuxbox, tvbox, udp, uirt2, uirt2_raw,
                          usb_uirt_raw, usbx, wpc8769l
Am I right?

[lykkedk]

Yes Bela' the lirc 0.9.0 will work with userspace.

Version 0.9.2 is different according to :

http://www.lirc.org/html/install.html#compiling


There are no longer ./configure script default.

Rgds; Jesper

[jgrulich]

Hi All,

thank you for great help. It's working now !!!
 I've tested all versions from 0.9.0 to 0.9.2a and it's strange, but the 0.9.2 and 0.9.2a are not working with uinput. Probably it need some more setting, or some parameter somewhere. May be I'll investigate later. It's working to the /var output, means it may be simply used for variety applications where some application is run via irexec, but no when you simply need only the "remote keyboard" which is my case.

Once again, Thank's a lot !!!

Regards,

Jan

[lykkedk]

Hey... Cool.

Try pasting lsmod here..  Wanna see if /dev/uinput is present

Jesper


Sent from my iPhone using Tapatalk

[jgrulich]

Hi Jesper,

yes, uinput module is loaded and even more used by the lird. I've tested all of this. It's very strange, because it looks really exactly same as for older version, but only difference is that it doesn't work. Even more stops working the irexec because data doesn't flow to the /var/run/lirc/lircd file. When the uinput is disabled during lircd start, irexec is working well.

Regards,

Jan

[jgrulich]

Hi all,

finally I've made minimal compilation of the 0.9.0 TC-6.1 version which is simple, stable and works fine.
If you like to test, it's here: http://grulich.eu/files/lirc-0.9.0-TC_6.1.tar.gz
Hope it will be useful for others.

Regards,

Jan

[bmarkus]

Jan, what is your proposal, drop 0.9.2 from repo and replace with your working config?

[jgrulich]

Béla, may be, or keep both of them.