WelcomeWelcome | FAQFAQ | DownloadsDownloads | WikiWiki
« previous next »
Pages: [1]   Go Down

Author Topic: installing to usb from which I booted  (Read 1818 times)

Offline hagna

  • Newbie
  • *
  • Posts: 5
installing to usb from which I booted
« on: April 08, 2015, 04:54:33 PM »
I have a usb stick with the CorePlus iso on it.  Can I boot with that stick and do a usb install of tinycore on the same stick? 

If so, am I missing a step in the following:

1. Bootup coreplus
2. copy core.gz off of the usb stick into /home/tc
3. unmount the stick
4. run the installer
5. tell it to install on the usb device (device reported by dmesg when I plug it in)
6. try booting with usb stick but now it won't boot.
Logged

Offline Lee

  • Hero Member
  • *****
  • Posts: 645
    • My Core wiki user page
Re: installing to usb from which I booted
« Reply #1 on: April 08, 2015, 07:14:19 PM »
I'm not all that familiar with the installer and exactly what it does but I note that you are explicitly handling core.gz in step #2.  You probably ought to grab the kernel (vmlinuz) and handle it in the same way.
Logged
32 bit core4.7.7, Xprogs, Xorg-7.6, wbar, jwm  |  - Testing -
PPR, data persistence through filetool.sh          |  32 bit core 8.0 alpha 1
USB Flash drive, one partition, ext2, grub4dos  | Otherwise similar

Offline curaga

  • Administrator
  • Hero Member
  • *****
  • Posts: 11044
Re: installing to usb from which I booted
« Reply #2 on: April 09, 2015, 03:37:18 AM »
The installer expects to copy things from the source stick, so you cannot install to the same partition with it. If you boot to RAM, copy all needed files like Lee said, you could do a manual install (instructions linked from the main install page).
Logged
The only barriers that can stop you are the ones you create yourself.
Pages: [1]   Go Up
« previous next »