Tiny Core Base > piCore Test Releases

piCore-6.1alpha2 for RPi2

<< < (3/4) > >>

bmarkus:
Did you keep the original directory structure below modules, including 3.....piCore+/kernel/... ?

jgrulich:
Yes, the structure is: /usr/local/lib/modules/3.18.6_v7-piCore+/kernel/drivers/w1 for the 1 wire driver for example.

jgrulich:
Just tried to install some other kernel module for 3.12.35 core and it updated all the other modules in the correct _v7 directory and all modules were loaded and it works fine. The 3.12.35 is not used, mean I deleted it and it now works.
But when I reboot, it is again without and I need to install the dummy module again.
Don't know how to force the system to update the modules.dep during startup after the backup recovers the added modules in the /usr directory, or how to do it manually after the boot finish.

jgrulich:
Now all is finally working. I've copied all the driver modules for the /net/usb and /net/wireless, /rtc, /i2c, /w1 and whole the /sound folder to the /usr/local/lib/modules/3.18.6_v7-piCore+/kernel folder and than via tce installed dummy kernel module net-usb-xxx. This updated all the modules.dep files. Than I've removed the dummy kernel manually and copied the modules.dep files to the /opt directory to have them in backup. Than as the first lines in the bootlocal.sh is copy of these files to the /lib directory which enables the added modules to be loaded. But the issue is than the loading of these modules, because they're not automatically loaded at startup and they need to be manually reloaded after the modules.dep files are copied.
 The device-tree is in this case not working too.

jgrulich:
I'd like to test some compatible web browser, preferably Chromium, or Firefox to see, if the speed is enough. Is it possible?
At Rasbian it somehow works, hope this will be much faster.

Navigation

[0] Message Index

[#] Next page

[*] Previous page