WelcomeWelcome | FAQFAQ | DownloadsDownloads | WikiWiki

Author Topic: Bootcodes of Picore6.0  (Read 18217 times)

Offline andriusr

  • Newbie
  • *
  • Posts: 34
Re: Bootcodes of Picore6.0
« Reply #15 on: February 16, 2015, 01:42:38 PM »
Rich,
by data I mean non-static data that web server have to store somewhere. They should be non-volatile on sudden power loss. I would have no time to execute filetool.sh in such a scenario.

Offline Rich

  • Administrator
  • Hero Member
  • *****
  • Posts: 11573
Re: Bootcodes of Picore6.0
« Reply #16 on: February 16, 2015, 01:44:39 PM »
Hi andriusr
Then set up your WWW directory under /opt or /home.

Offline andriusr

  • Newbie
  • *
  • Posts: 34
Re: Bootcodes of Picore6.0
« Reply #17 on: February 16, 2015, 02:31:43 PM »
Quote
Then set up your WWW directory under /opt or /home.
How about sudden power loss? How the data will be recoved? As I understand from documentation, to save it permanently you have to execure filetool.sh...

Offline Rich

  • Administrator
  • Hero Member
  • *****
  • Posts: 11573
Re: Bootcodes of Picore6.0
« Reply #18 on: February 16, 2015, 02:36:36 PM »
Hi andriusr
You make the /opt and /home directories persistent. That means they are on your flash storage device, not in the RAM based file system.

Offline bmarkus

  • Administrator
  • Hero Member
  • *****
  • Posts: 7183
    • My Community Forum
Re: Bootcodes of Picore6.0
« Reply #19 on: February 16, 2015, 02:55:18 PM »
Tested boot time on virgin SSH image (only added nano for text files editing).
Total boot time is ~16sec, including:
~5 sec for basic start up.
~5.5 sec for mounting of file images (hpefully this can be improved by making one big tcz file containing all files?)
~1.5 sec for ini of eth0 interface
~4 sec till start of SSH server listening on port 22.
Swap file creation takes, for exapmple ~1.5 sec.

You can disable ZSWAP in RAM and use SWAP partition on the SD card or run system without any swap space, depending on your application.

In your measurement there is the SSH key generation which happenes only once when you start system first expecting you backup generated keys.

Merging tcz's into one big extension you can save loop mounting time and dependcy resolution, but the most time consuming is symlinking which will remain the same.

Moving extensions to initrd may help also.
Béla
Ham Radio callsign: HA5DI

"Amateur Radio: The First Technology-Based Social Network."

Offline curaga

  • Administrator
  • Hero Member
  • *****
  • Posts: 11041
Re: Bootcodes of Picore6.0
« Reply #20 on: February 16, 2015, 04:53:26 PM »
Expecting 5s total for a rpi is really unrealistic, that is taken almost just by initial bootloader + kernel.
The only barriers that can stop you are the ones you create yourself.

Offline bmarkus

  • Administrator
  • Hero Member
  • *****
  • Posts: 7183
    • My Community Forum
Re: Bootcodes of Picore6.0
« Reply #21 on: February 17, 2015, 01:41:32 AM »
Expecting 5s total for a rpi is really unrealistic, that is taken almost just by initial bootloader + kernel.

Do you mean 5s is too high or too low?
Béla
Ham Radio callsign: HA5DI

"Amateur Radio: The First Technology-Based Social Network."

Offline curaga

  • Administrator
  • Hero Member
  • *****
  • Posts: 11041
Re: Bootcodes of Picore6.0
« Reply #22 on: February 17, 2015, 03:14:07 AM »
If just kernel and the gpu bootloader take it, the total boot time must be more.
The only barriers that can stop you are the ones you create yourself.

Offline bmarkus

  • Administrator
  • Hero Member
  • *****
  • Posts: 7183
    • My Community Forum
Re: Bootcodes of Picore6.0
« Reply #23 on: February 17, 2015, 03:40:24 AM »
OK, lets see dmesg. Hardware is RPi Model-B. Booting piCore base only, no other partitions on the SD card, no extensions, only external device connected is HDMI monitor and keyboard.

Kernel 3.12.36+, zswap enabled (default cmdline options):

Code: [Select]
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.12.36-piCore+ (root@beta.hasix.org) (gcc version 4.9.1 (crosstool-NG 1.20.0) ) #1 PREEMPT Mon Jan 19 22:46:45 CET 2015
[    0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[    0.000000] Machine: BCM2708
[    0.000000] cma: CMA: reserved 8 MiB at 1b800000
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] On node 0 totalpages: 114688
[    0.000000] free_area_init_node: node 0, pgdat c06304f0, node_mem_map c0d96000
[    0.000000]   Normal zone: 896 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 114688 pages, LIFO batch:31
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 113792
[    0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1280 bcm2708_fb.fbheight=1024 bcm2708.boardrev=0xe bcm2708.serial=0x7d40730a smsc95xx.macaddr=B8:27:EB:40:73:0A bcm2708_fb.fbswap=1 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000  dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=/dev/ram0 elevator=deadline rootwait nortc loglevel=3 noembed
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 435788K/458752K available (4531K kernel code, 260K rwdata, 1364K rodata, 145K init, 702K bss, 22964K reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdc800000 - 0xff000000   ( 552 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdc000000   ( 448 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc05c9f28   (5896 kB)
[    0.000000]       .init : 0xc05ca000 - 0xc05ee64c   ( 146 kB)
[    0.000000]       .data : 0xc05f0000 - 0xc0631040   ( 261 kB)
[    0.000000]        .bss : 0xc063104c - 0xc06e0908   ( 703 kB)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:522
[    0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
[    0.000000] Switching to timer-based delay loop
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [tty1] enabled
[    0.000614] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
[    0.000634] pid_max: default: 32768 minimum: 301
[    0.001137] Mount-cache hash table entries: 512
[    0.001957] Initializing cgroup subsys memory
[    0.002039] Initializing cgroup subsys devices
[    0.002056] Initializing cgroup subsys freezer
[    0.002069] Initializing cgroup subsys blkio
[    0.002198] CPU: Testing write buffer coherency: ok
[    0.002617] Setting up static identity map for 0xc0450b58 - 0xc0450bb4
[    0.004481] devtmpfs: initialized
[    0.020571] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[    0.022113] NET: Registered protocol family 16
[    0.027517] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[    0.028127] cpuidle: using governor ladder
[    0.028148] cpuidle: using governor menu
[    0.028654] bcm2708.uart_clock = 0
[    0.030535] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[    0.030555] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.030568] mailbox: Broadcom VideoCore Mailbox driver
[    0.030641] bcm2708_vcio: mailbox at f200b880
[    0.030721] bcm_power: Broadcom power driver
[    0.030739] bcm_power_open() -> 0
[    0.030748] bcm_power_request(0, 8)
[    0.531457] bcm_mailbox_read -> 00000080, 0
[    0.531473] bcm_power_request -> 0
[    0.531720] Serial: AMBA PL011 UART driver
[    0.531861] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83, base_baud = 0) is a PL011 rev3
[    0.532208] console [ttyAMA0] enabled
[    0.554503] bio: create slab <bio-0> at 0
[    0.555887] SCSI subsystem initialized
[    0.556087] usbcore: registered new interface driver usbfs
[    0.556172] usbcore: registered new interface driver hub
[    0.556424] usbcore: registered new device driver usb
[    0.557921] Switched to clocksource stc
[    0.558274] FS-Cache: Loaded
[    0.558575] CacheFiles: Loaded
[    0.571012] NET: Registered protocol family 2
[    0.572505] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[    0.572645] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[    0.572744] TCP: Hash tables configured (established 4096 bind 4096)
[    0.572824] TCP: reno registered
[    0.572847] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.572878] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.573339] NET: Registered protocol family 1
[    0.573901] RPC: Registered named UNIX socket transport module.
[    0.573926] RPC: Registered udp transport module.
[    0.573936] RPC: Registered tcp transport module.
[    0.573945] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.574259] Trying to unpack rootfs image as initramfs...
[    1.051784] Freeing initrd memory: 3668K (c0a00000 - c0d95000)
[    1.067683] bcm2708_dma: DMA manager at f2007000
[    1.067791] bcm2708_gpio: bcm2708_gpio_probe c05fdf10
[    1.068323] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
[    1.069616] audit: initializing netlink socket (disabled)
[    1.069701] type=2000 audit(1.060:1): initialized
[    1.232939] zbud: loaded
[    1.233442] VFS: Disk quotas dquot_6.5.2
[    1.233761] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.235850] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.236272] FS-Cache: Netfs 'nfs' registered for caching
[    1.237822] NFS: Registering the id_resolver key type
[    1.238001] Key type id_resolver registered
[    1.238019] Key type id_legacy registered
[    1.238763] msgmni has been set to 874
[    1.240892] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.241215] io scheduler noop registered
[    1.241238] io scheduler deadline registered (default)
[    1.241545] io scheduler cfq registered
[    1.242882] BCM2708FB: allocated DMA memory 5bc00000
[    1.242947] BCM2708FB: allocated DMA channel 0 @ f2007000
[    1.258636] Console: switching to colour frame buffer device 160x64
[    1.270258] bcm2708-dmaengine bcm2708-dmaengine: Load BCM2835 DMA engine driver
[    1.270611] uart-pl011 dev:f1: no DMA platform data
[    1.271249] vc-cma: Videocore CMA driver
[    1.271269] vc-cma: vc_cma_base      = 0x00000000
[    1.271281] vc-cma: vc_cma_size      = 0x00000000 (0 MiB)
[    1.271291] vc-cma: vc_cma_initial   = 0x00000000 (0 MiB)
[    1.280847] brd: module loaded
[    1.286008] loop: module loaded
[    1.286348] vchiq: vchiq_init_state: slot_zero = 0xdb800000, is_master = 0
[    1.287456] Loading iSCSI transport class v2.0-870.
[    1.288621] usbcore: registered new interface driver smsc95xx
[    1.288710] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    1.488903] Core Release: 2.80a
[    1.488934] Setting default values for core params
[    1.488975] Finished setting default values for core params
[    1.689055] Using Buffer DMA mode
[    1.689082] Periodic Transfer Interrupt Enhancement - disabled
[    1.689094] Multiprocessor Interrupt Enhancement - disabled
[    1.689106] OTG VER PARAM: 0, OTG VER FLAG: 0
[    1.689122] Dedicated Tx FIFOs mode
[    1.689492] WARN::dwc_otg_hcd_init:1042: FIQ DMA bounce buffers: virt = 0xdbc14000 dma = 0x5bc14000 len=9024
[    1.689528] FIQ FSM acceleration enabled for :
[    1.689528] Non-periodic Split Transactions
[    1.689528] Periodic Split Transactions
[    1.689528] High-Speed Isochronous Endpoints
[    1.689555] dwc_otg: Microframe scheduler enabled
[    1.689613] WARN::hcd_init:473: FIQ at 0xc032aa24
[    1.689630] WARN::hcd_init:474: FIQ ASM at 0xc032acd8 length 36
[    1.689659] WARN::hcd_init:500: MPHI regs_base at 0xdc806000
[    1.689689] dwc_otg bcm2708_usb: DWC OTG Controller
[    1.689743] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
[    1.689802] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
[    1.689840] Init: Port Power? op_state=1
[    1.689850] Init: Power Port (0)
[    1.690182] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.690206] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.690221] usb usb1: Product: DWC OTG Controller
[    1.690236] usb usb1: Manufacturer: Linux 3.12.36-piCore+ dwc_otg_hcd
[    1.690250] usb usb1: SerialNumber: bcm2708_usb
[    1.691108] hub 1-0:1.0: USB hub found
[    1.691196] hub 1-0:1.0: 1 port detected
[    1.691681] dwc_otg: FIQ enabled
[    1.691698] dwc_otg: NAK holdoff enabled
[    1.691709] dwc_otg: FIQ split-transaction FSM enabled
[    1.691730] Module dwc_common_port init
[    1.692204] usbcore: registered new interface driver usb-storage
[    1.692556] mousedev: PS/2 mouse device common for all mice
[    1.693221] bcm2835-cpufreq: min=700000 max=900000 cur=700000
[    1.693327] bcm2835-cpufreq: switching to governor ondemand
[    1.693342] bcm2835-cpufreq: switching to governor ondemand
[    1.694788] sdhci: Secure Digital Host Controller Interface driver
[    1.694802] sdhci: Copyright(c) Pierre Ossman
[    1.694973] DMA channels allocated for the MMC driver
[    1.727958] Load BCM2835 MMC driver
[    1.728089] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.728114] ledtrig-cpu: registered to indicate activity on CPUs
[    1.728206] hidraw: raw HID events driver (C) Jiri Kosina
[    1.730456] usbcore: registered new interface driver usbhid
[    1.730468] usbhid: USB HID core driver
[    1.736341] zram: Created 1 device(s) ...
[    1.736805] TCP: cubic registered
[    1.736820] Initializing XFRM netlink socket
[    1.736849] NET: Registered protocol family 17
[    1.736975] Key type dns_resolver registered
[    1.740096] registered taskstats version 1
[    1.740147] vc-sm: Videocore shared memory driver
[    1.740163] [vc_sm_connected_init]: start
[    1.744911] [vc_sm_connected_init]: end - returning 0
[    1.748098] Freeing unused kernel memory: 144K (c05ca000 - c05ee000)
[    1.786139] mmc0: host does not support reading read-only switch. assuming write-enable.
[    1.788995] mmc0: new high speed SDHC card at address b368
[    1.794394] mmcblk0: mmc0:b368 SMI   3.74 GiB
[    1.795743]  mmcblk0: p1
[    1.888230] Indeed it is in host mode hprt0 = 00021501
[    2.128146] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    2.128323] Indeed it is in host mode hprt0 = 00001101
[    2.398334] usb 1-1: New USB device found, idVendor=0424, idProduct=9512
[    2.398359] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.399070] hub 1-1:1.0: USB hub found
[    2.399185] hub 1-1:1.0: 3 ports detected
[    2.678171] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    2.778360] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[    2.778371] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.781180] smsc95xx v1.0.4
[    2.848599] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:40:73:0a
[    2.928234] usb 1-1.2: new low-speed USB device number 4 using dwc_otg
[    3.043986] usb 1-1.2: New USB device found, idVendor=04f3, idProduct=0103
[    3.044011] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.068714] input: HID 04f3:0103 as /devices/platform/bcm2708_usb/usb1/1-1/1-1.2/1-1.2:1.0/input/input0
[    3.069040] hid-generic 0003:04F3:0103.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 04f3:0103] on usb-bcm2708_usb-1.2/input0
[    3.087116] input: HID 04f3:0103 as /devices/platform/bcm2708_usb/usb1/1-1/1-1.2/1-1.2:1.1/input/input1
[    3.087412] hid-generic 0003:04F3:0103.0002: input,hidraw1: USB HID v1.11 Device [HID 04f3:0103] on usb-bcm2708_usb-1.2/input1
[    3.142020] bcm2708_i2c_init_pinmode(1,2)
[    3.142041] bcm2708_i2c_init_pinmode(1,3)
[    3.142525] bcm2708_i2c bcm2708_i2c.1: BSC1 Controller at 0x20804000 (irq 79) (baudrate 100000)
[    3.198769] bcm2708_spi bcm2708_spi.0: master is unqueued, this is deprecated
[    3.208676] bcm2708_spi bcm2708_spi.0: SPI Controller at 0x20204000 (irq 80)
[    3.624082] Adding 106900k swap on /dev/zram0.  Priority:-1 extents:1 across:106900k SSFS
[    5.664060] bcm2835-cpufreq: switching to governor ondemand
[    5.664088] bcm2835-cpufreq: switching to governor ondemand
[    5.748296] i2c /dev entries driver
[    5.790079] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[    7.289782] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1


Béla
Ham Radio callsign: HA5DI

"Amateur Radio: The First Technology-Based Social Network."

Offline bmarkus

  • Administrator
  • Hero Member
  • *****
  • Posts: 7183
    • My Community Forum
Re: Bootcodes of Picore6.0
« Reply #24 on: February 17, 2015, 03:41:48 AM »
Kernel 3.18.6+, zswap enabled (default cmdline options):

Code: [Select]
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.18.6-piCore+ (root@beta.hasix.org) (gcc version 4.9.1 (crosstool-NG 1.20.0) ) #1 PREEMPT Sun Feb 8 01:08:30 CET 2015
[    0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[    0.000000] Machine model: Raspberry Pi Model B
[    0.000000] cma: Reserved 8 MiB at 0x1b400000
[    0.000000] Memory policy: Data cache writeback
[    0.000000] On node 0 totalpages: 114688
[    0.000000] free_area_init_node: node 0, pgdat c085fb1c, node_mem_map db080000
[    0.000000]   Normal zone: 896 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 114688 pages, LIFO batch:31
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 113792
[    0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1280 bcm2708_fb.fbheight=1024 bcm2708.boardrev=0xe bcm2708.serial=0x7d40730a smsc95xx.macaddr=B8:27:EB:40:73:0A bcm2708_fb.fbswap=1 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000  dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=/dev/ram0 elevator=deadline rootwait nortc loglevel=3 noembed
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 433364K/458752K available (5986K kernel code, 358K rwdata, 1888K rodata, 340K init, 734K bss, 25388K reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xffe00000   (2048 kB)
[    0.000000]     vmalloc : 0xdc800000 - 0xff000000   ( 552 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdc000000   ( 448 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc07b8af4   (7875 kB)
[    0.000000]       .init : 0xc07b9000 - 0xc080e000   ( 340 kB)
[    0.000000]       .data : 0xc080e000 - 0xc0867b8c   ( 359 kB)
[    0.000000]        .bss : 0xc0867b8c - 0xc091f508   ( 735 kB)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:522
[    0.000027] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483648000ns
[    0.000076] Switching to timer-based delay loop, resolution 1000ns
[    0.000366] Console: colour dummy device 80x30
[    0.000584] console [tty1] enabled
[    0.000613] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
[    0.000638] pid_max: default: 32768 minimum: 301
[    0.001016] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.001042] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.002022] Initializing cgroup subsys memory
[    0.002077] Initializing cgroup subsys devices
[    0.002112] Initializing cgroup subsys freezer
[    0.002142] Initializing cgroup subsys net_cls
[    0.002169] Initializing cgroup subsys blkio
[    0.002263] CPU: Testing write buffer coherency: ok
[    0.002345] ftrace: allocating 19659 entries in 58 pages
[    0.104568] Setting up static identity map for 0x56b230 - 0x56b28c
[    0.107329] devtmpfs: initialized
[    0.126352] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[    0.129499] pinctrl core: initialized pinctrl subsystem
[    0.132018] NET: Registered protocol family 16
[    0.137564] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[    0.164345] cpuidle: using governor ladder
[    0.194400] cpuidle: using governor menu
[    0.194970] bcm2708.uart_clock = 3000000
[    0.197977] No ATAGs?
[    0.198029] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[    0.198047] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.198087] mailbox: Broadcom VideoCore Mailbox driver
[    0.198230] bcm2708_vcio: mailbox at f200b880
[    0.198665] bcm_power: Broadcom power driver
[    0.198693] bcm_power_open() -> 0
[    0.198705] bcm_power_request(0, 8)
[    0.699431] bcm_mailbox_read -> 00000080, 0
[    0.699452] bcm_power_request -> 0
[    0.699635] Serial: AMBA PL011 UART driver
[    0.699846] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83, base_baud = 0) is a PL011 rev3
[    0.700248] console [ttyAMA0] enabled
[    0.767979] SCSI subsystem initialized
[    0.768305] usbcore: registered new interface driver usbfs
[    0.768440] usbcore: registered new interface driver hub
[    0.768623] usbcore: registered new device driver usb
[    0.770723] Switched to clocksource stc
[    0.799716] FS-Cache: Loaded
[    0.800150] CacheFiles: Loaded
[    0.817017] NET: Registered protocol family 2
[    0.818485] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.818590] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[    0.818690] TCP: Hash tables configured (established 4096 bind 4096)
[    0.818781] TCP: reno registered
[    0.818808] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.818841] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.819221] NET: Registered protocol family 1
[    0.819893] RPC: Registered named UNIX socket transport module.
[    0.819924] RPC: Registered udp transport module.
[    0.819937] RPC: Registered tcp transport module.
[    0.819948] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.820396] Trying to unpack rootfs image as initramfs...
[    1.314366] Freeing initrd memory: 3772K (dbc41000 - dbff0000)
[    1.333827] bcm2708_dma: DMA manager at f2007000
[    1.334065] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
[    1.335595] futex hash table entries: 256 (order: -1, 3072 bytes)
[    1.335743] audit: initializing netlink subsys (disabled)
[    1.335847] audit: type=2000 audit(1.260:1): initialized
[    1.350241] zpool: loaded
[    1.351519] VFS: Disk quotas dquot_6.5.2
[    1.351917] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.354363] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.355050] FS-Cache: Netfs 'nfs' registered for caching
[    1.356858] NFS: Registering the id_resolver key type
[    1.356982] Key type id_resolver registered
[    1.357002] Key type id_legacy registered
[    1.358396] msgmni has been set to 869
[    1.361339] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.361808] io scheduler noop registered
[    1.361848] io scheduler deadline registered (default)
[    1.362255] io scheduler cfq registered
[    1.364901] BCM2708FB: allocated DMA memory 5b800000
[    1.364973] BCM2708FB: allocated DMA channel 0 @ f2007000
[    1.384001] Console: switching to colour frame buffer device 160x64
[    1.398291] bcm2708-dmaengine bcm2708-dmaengine: Load BCM2835 DMA engine driver
[    1.398779] uart-pl011 dev:f1: no DMA platform data
[    1.399571] vc-cma: Videocore CMA driver
[    1.399598] vc-cma: vc_cma_base      = 0x00000000
[    1.399611] vc-cma: vc_cma_size      = 0x00000000 (0 MiB)
[    1.399623] vc-cma: vc_cma_initial   = 0x00000000 (0 MiB)
[    1.413772] brd: module loaded
[    1.421300] loop: module loaded
[    1.422500] zram: Created 1 device(s) ...
[    1.422975] vchiq: vchiq_init_state: slot_zero = 0xdb400000, is_master = 0
[    1.424198] Loading iSCSI transport class v2.0-870.
[    1.425645] usbcore: registered new interface driver smsc95xx
[    1.425765] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    1.626089] Core Release: 2.80a
[    1.626127] Setting default values for core params
[    1.626175] Finished setting default values for core params
[    1.826386] Using Buffer DMA mode
[    1.826415] Periodic Transfer Interrupt Enhancement - disabled
[    1.826428] Multiprocessor Interrupt Enhancement - disabled
[    1.826442] OTG VER PARAM: 0, OTG VER FLAG: 0
[    1.826461] Dedicated Tx FIFOs mode
[    1.826902] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xdb814000 dma = 0x5b814000 len=9024
[    1.826940] FIQ FSM acceleration enabled for :
[    1.826940] Non-periodic Split Transactions
[    1.826940] Periodic Split Transactions
[    1.826940] High-Speed Isochronous Endpoints
[    1.826971] dwc_otg: Microframe scheduler enabled
[    1.827048] WARN::hcd_init_fiq:412: FIQ on core 0 at 0xc0410fc4
[    1.827070] WARN::hcd_init_fiq:413: FIQ ASM at 0xc04112a0 length 36
[    1.827105] WARN::hcd_init_fiq:438: MPHI regs_base at 0xdc80a000
[    1.827140] dwc_otg bcm2708_usb: DWC OTG Controller
[    1.827206] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
[    1.827277] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
[    1.827324] Init: Port Power? op_state=1
[    1.827337] Init: Power Port (0)
[    1.827784] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.827813] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.827831] usb usb1: Product: DWC OTG Controller
[    1.827848] usb usb1: Manufacturer: Linux 3.18.6-piCore+ dwc_otg_hcd
[    1.827864] usb usb1: SerialNumber: bcm2708_usb
[    1.829041] hub 1-0:1.0: USB hub found
[    1.829157] hub 1-0:1.0: 1 port detected
[    1.829868] dwc_otg: FIQ enabled
[    1.829890] dwc_otg: NAK holdoff enabled
[    1.829903] dwc_otg: FIQ split-transaction FSM enabled
[    1.829965] Module dwc_common_port init
[    1.830551] usbcore: registered new interface driver usb-storage
[    1.831159] mousedev: PS/2 mouse device common for all mice
[    1.832159] bcm2835-cpufreq: min=700000 max=700000
[    1.832528] sdhci: Secure Digital Host Controller Interface driver
[    1.832548] sdhci: Copyright(c) Pierre Ossman
[    1.832807] DMA channels allocated for the MMC driver
[    1.870798] Load BCM2835 MMC driver
[    1.871059] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.879175] ledtrig-cpu: registered to indicate activity on CPUs
[    1.879422] hidraw: raw HID events driver (C) Jiri Kosina
[    1.879789] usbcore: registered new interface driver usbhid
[    1.879810] usbhid: USB HID core driver
[    1.880214] TCP: cubic registered
[    1.880247] Initializing XFRM netlink socket
[    1.880306] NET: Registered protocol family 17
[    1.880533] Key type dns_resolver registered
[    1.888940] registered taskstats version 1
[    1.891482] vc-sm: Videocore shared memory driver
[    1.891516] [vc_sm_connected_init]: start
[    1.896117] [vc_sm_connected_init]: end - returning 0
[    1.898688] Freeing unused kernel memory: 340K (c07b9000 - c080e000)
[    1.929009] mmc0: host does not support reading read-only switch, assuming write-enable
[    1.931284] mmc0: new high speed SDHC card at address b368
[    1.941103] mmcblk0: mmc0:b368 SMI   3.74 GiB
[    1.942724]  mmcblk0: p1
[    2.021101] Indeed it is in host mode hprt0 = 00021501
[    2.291096] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    2.291327] Indeed it is in host mode hprt0 = 00001101
[    2.571558] usb 1-1: New USB device found, idVendor=0424, idProduct=9512
[    2.571616] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.572899] hub 1-1:1.0: USB hub found
[    2.573079] hub 1-1:1.0: 3 ports detected
[    2.851062] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    2.951583] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[    2.951622] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.954940] smsc95xx v1.0.4
[    3.020039] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:40:73:0a
[    3.101047] usb 1-1.2: new low-speed USB device number 4 using dwc_otg
[    3.210351] usb 1-1.2: New USB device found, idVendor=04f3, idProduct=0103
[    3.210391] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.227403] input: HID 04f3:0103 as /devices/platform/bcm2708_usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:04F3:0103.0001/input/input0
[    3.231084] hid-generic 0003:04F3:0103.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 04f3:0103] on usb-bcm2708_usb-1.2/input0
[    3.261981] input: HID 04f3:0103 as /devices/platform/bcm2708_usb/usb1/1-1/1-1.2/1-1.2:1.1/0003:04F3:0103.0002/input/input1
[    3.262431] hid-generic 0003:04F3:0103.0002: input,hidraw1: USB HID v1.11 Device [HID 04f3:0103] on usb-bcm2708_usb-1.2/input1
[    4.841444] zram0: detected capacity change from 0 to 108363776
[    4.859762] random: mkswap urandom read with 87 bits of entropy available
[    4.893571] Adding 105820k swap on /dev/zram0.  Priority:-1 extents:1 across:105820k SSFS
[    7.875769] i2c /dev entries driver
[    7.931162] random: nonblocking pool is initialized
[    7.942111] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[    9.483134] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Béla
Ham Radio callsign: HA5DI

"Amateur Radio: The First Technology-Based Social Network."

Offline bmarkus

  • Administrator
  • Hero Member
  • *****
  • Posts: 7183
    • My Community Forum
Re: Bootcodes of Picore6.0
« Reply #25 on: February 17, 2015, 03:42:57 AM »
Kernel 3.18.6+, with nozswap:

Code: [Select]
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.18.6-piCore+ (root@beta.hasix.org) (gcc version 4.9.1 (crosstool-NG 1.20.0) ) #1 PREEMPT Sun Feb 8 01:08:30 CET 2015
[    0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[    0.000000] Machine model: Raspberry Pi Model B
[    0.000000] cma: Reserved 8 MiB at 0x1b400000
[    0.000000] Memory policy: Data cache writeback
[    0.000000] On node 0 totalpages: 114688
[    0.000000] free_area_init_node: node 0, pgdat c085fb1c, node_mem_map db080000
[    0.000000]   Normal zone: 896 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 114688 pages, LIFO batch:31
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 113792
[    0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1280 bcm2708_fb.fbheight=1024 bcm2708.boardrev=0xe bcm2708.serial=0x7d40730a smsc95xx.macaddr=B8:27:EB:40:73:0A bcm2708_fb.fbswap=1 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000  dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=/dev/ram0 elevator=deadline rootwait nortc loglevel=3 noembed nozswap
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 433364K/458752K available (5986K kernel code, 358K rwdata, 1888K rodata, 340K init, 734K bss, 25388K reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xffc00000 - 0xffe00000   (2048 kB)
[    0.000000]     vmalloc : 0xdc800000 - 0xff000000   ( 552 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdc000000   ( 448 MB)
[    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
[    0.000000]       .text : 0xc0008000 - 0xc07b8af4   (7875 kB)
[    0.000000]       .init : 0xc07b9000 - 0xc080e000   ( 340 kB)
[    0.000000]       .data : 0xc080e000 - 0xc0867b8c   ( 359 kB)
[    0.000000]        .bss : 0xc0867b8c - 0xc091f508   ( 735 kB)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] NR_IRQS:522
[    0.000025] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483648000ns
[    0.000076] Switching to timer-based delay loop, resolution 1000ns
[    0.000366] Console: colour dummy device 80x30
[    0.000584] console [tty1] enabled
[    0.000613] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
[    0.000639] pid_max: default: 32768 minimum: 301
[    0.001020] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.001048] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.002032] Initializing cgroup subsys memory
[    0.002088] Initializing cgroup subsys devices
[    0.002122] Initializing cgroup subsys freezer
[    0.002151] Initializing cgroup subsys net_cls
[    0.002178] Initializing cgroup subsys blkio
[    0.002273] CPU: Testing write buffer coherency: ok
[    0.002353] ftrace: allocating 19659 entries in 58 pages
[    0.104510] Setting up static identity map for 0x56b230 - 0x56b28c
[    0.107282] devtmpfs: initialized
[    0.126371] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[    0.129534] pinctrl core: initialized pinctrl subsystem
[    0.132060] NET: Registered protocol family 16
[    0.137684] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[    0.164288] cpuidle: using governor ladder
[    0.194348] cpuidle: using governor menu
[    0.194950] bcm2708.uart_clock = 3000000
[    0.197960] No ATAGs?
[    0.198011] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[    0.198028] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.198069] mailbox: Broadcom VideoCore Mailbox driver
[    0.198212] bcm2708_vcio: mailbox at f200b880
[    0.198647] bcm_power: Broadcom power driver
[    0.198674] bcm_power_open() -> 0
[    0.198686] bcm_power_request(0, 8)
[    0.699411] bcm_mailbox_read -> 00000080, 0
[    0.699432] bcm_power_request -> 0
[    0.699618] Serial: AMBA PL011 UART driver
[    0.699829] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83, base_baud = 0) is a PL011 rev3
[    0.700232] console [ttyAMA0] enabled
[    0.767914] SCSI subsystem initialized
[    0.768247] usbcore: registered new interface driver usbfs
[    0.768379] usbcore: registered new interface driver hub
[    0.768563] usbcore: registered new device driver usb
[    0.770692] Switched to clocksource stc
[    0.799691] FS-Cache: Loaded
[    0.800122] CacheFiles: Loaded
[    0.816973] NET: Registered protocol family 2
[    0.818451] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.818556] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[    0.818657] TCP: Hash tables configured (established 4096 bind 4096)
[    0.818747] TCP: reno registered
[    0.818775] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.818808] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.819189] NET: Registered protocol family 1
[    0.819859] RPC: Registered named UNIX socket transport module.
[    0.819890] RPC: Registered udp transport module.
[    0.819903] RPC: Registered tcp transport module.
[    0.819915] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.820361] Trying to unpack rootfs image as initramfs...
[    1.316012] Freeing initrd memory: 3772K (dbc41000 - dbff0000)
[    1.335643] bcm2708_dma: DMA manager at f2007000
[    1.335880] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
[    1.337416] futex hash table entries: 256 (order: -1, 3072 bytes)
[    1.337565] audit: initializing netlink subsys (disabled)
[    1.337669] audit: type=2000 audit(1.260:1): initialized
[    1.352349] zpool: loaded
[    1.353411] VFS: Disk quotas dquot_6.5.2
[    1.353807] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.356253] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.356939] FS-Cache: Netfs 'nfs' registered for caching
[    1.358740] NFS: Registering the id_resolver key type
[    1.358857] Key type id_resolver registered
[    1.358877] Key type id_legacy registered
[    1.360270] msgmni has been set to 869
[    1.363368] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    1.363766] io scheduler noop registered
[    1.363806] io scheduler deadline registered (default)
[    1.364206] io scheduler cfq registered
[    1.366866] BCM2708FB: allocated DMA memory 5b800000
[    1.366939] BCM2708FB: allocated DMA channel 0 @ f2007000
[    1.385549] Console: switching to colour frame buffer device 160x64
[    1.400019] bcm2708-dmaengine bcm2708-dmaengine: Load BCM2835 DMA engine driver
[    1.400508] uart-pl011 dev:f1: no DMA platform data
[    1.401468] vc-cma: Videocore CMA driver
[    1.401494] vc-cma: vc_cma_base      = 0x00000000
[    1.401507] vc-cma: vc_cma_size      = 0x00000000 (0 MiB)
[    1.401518] vc-cma: vc_cma_initial   = 0x00000000 (0 MiB)
[    1.415440] brd: module loaded
[    1.423008] loop: module loaded
[    1.424200] zram: Created 1 device(s) ...
[    1.424670] vchiq: vchiq_init_state: slot_zero = 0xdb400000, is_master = 0
[    1.425914] Loading iSCSI transport class v2.0-870.
[    1.427356] usbcore: registered new interface driver smsc95xx
[    1.427476] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    1.627802] Core Release: 2.80a
[    1.627840] Setting default values for core params
[    1.627889] Finished setting default values for core params
[    1.828104] Using Buffer DMA mode
[    1.828133] Periodic Transfer Interrupt Enhancement - disabled
[    1.828146] Multiprocessor Interrupt Enhancement - disabled
[    1.828160] OTG VER PARAM: 0, OTG VER FLAG: 0
[    1.828179] Dedicated Tx FIFOs mode
[    1.828624] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xdb814000 dma = 0x5b814000 len=9024
[    1.828662] FIQ FSM acceleration enabled for :
[    1.828662] Non-periodic Split Transactions
[    1.828662] Periodic Split Transactions
[    1.828662] High-Speed Isochronous Endpoints
[    1.828694] dwc_otg: Microframe scheduler enabled
[    1.828766] WARN::hcd_init_fiq:412: FIQ on core 0 at 0xc0410fc4
[    1.828788] WARN::hcd_init_fiq:413: FIQ ASM at 0xc04112a0 length 36
[    1.828823] WARN::hcd_init_fiq:438: MPHI regs_base at 0xdc80a000
[    1.828859] dwc_otg bcm2708_usb: DWC OTG Controller
[    1.828925] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
[    1.828997] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
[    1.829045] Init: Port Power? op_state=1
[    1.829058] Init: Power Port (0)
[    1.829507] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.829537] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.829556] usb usb1: Product: DWC OTG Controller
[    1.829572] usb usb1: Manufacturer: Linux 3.18.6-piCore+ dwc_otg_hcd
[    1.829588] usb usb1: SerialNumber: bcm2708_usb
[    1.830945] hub 1-0:1.0: USB hub found
[    1.831064] hub 1-0:1.0: 1 port detected
[    1.831776] dwc_otg: FIQ enabled
[    1.831799] dwc_otg: NAK holdoff enabled
[    1.831812] dwc_otg: FIQ split-transaction FSM enabled
[    1.831871] Module dwc_common_port init
[    1.832464] usbcore: registered new interface driver usb-storage
[    1.832913] mousedev: PS/2 mouse device common for all mice
[    1.833915] bcm2835-cpufreq: min=700000 max=700000
[    1.834296] sdhci: Secure Digital Host Controller Interface driver
[    1.834316] sdhci: Copyright(c) Pierre Ossman
[    1.834567] DMA channels allocated for the MMC driver
[    1.870770] Load BCM2835 MMC driver
[    1.871033] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.878150] ledtrig-cpu: registered to indicate activity on CPUs
[    1.878392] hidraw: raw HID events driver (C) Jiri Kosina
[    1.878757] usbcore: registered new interface driver usbhid
[    1.878778] usbhid: USB HID core driver
[    1.879182] TCP: cubic registered
[    1.879215] Initializing XFRM netlink socket
[    1.879274] NET: Registered protocol family 17
[    1.879519] Key type dns_resolver registered
[    1.887939] registered taskstats version 1
[    1.890501] vc-sm: Videocore shared memory driver
[    1.890536] [vc_sm_connected_init]: start
[    1.895160] [vc_sm_connected_init]: end - returning 0
[    1.897760] Freeing unused kernel memory: 340K (c07b9000 - c080e000)
[    1.929082] mmc0: host does not support reading read-only switch, assuming write-enable
[    1.931480] mmc0: new high speed SDHC card at address b368
[    1.941821] mmcblk0: mmc0:b368 SMI   3.74 GiB
[    1.943629]  mmcblk0: p1
[    2.031103] Indeed it is in host mode hprt0 = 00021501
[    2.291074] usb 1-1: new high-speed USB device number 2 using dwc_otg
[    2.291311] Indeed it is in host mode hprt0 = 00001101
[    2.571541] usb 1-1: New USB device found, idVendor=0424, idProduct=9512
[    2.571600] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.572934] hub 1-1:1.0: USB hub found
[    2.573130] hub 1-1:1.0: 3 ports detected
[    2.851012] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[    2.951507] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[    2.951545] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.954871] smsc95xx v1.0.4
[    3.018619] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:40:73:0a
[    3.101107] usb 1-1.2: new low-speed USB device number 4 using dwc_otg
[    3.217214] usb 1-1.2: New USB device found, idVendor=04f3, idProduct=0103
[    3.217253] usb 1-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.234262] input: HID 04f3:0103 as /devices/platform/bcm2708_usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:04F3:0103.0001/input/input0
[    3.241156] hid-generic 0003:04F3:0103.0001: input,hidraw0: USB HID v1.11 Keyboard [HID 04f3:0103] on usb-bcm2708_usb-1.2/input0
[    3.261972] input: HID 04f3:0103 as /devices/platform/bcm2708_usb/usb1/1-1/1-1.2/1-1.2:1.1/0003:04F3:0103.0002/input/input1
[    3.262495] hid-generic 0003:04F3:0103.0002: input,hidraw1: USB HID v1.11 Device [HID 04f3:0103] on usb-bcm2708_usb-1.2/input1
[    7.636535] random: nonblocking pool is initialized
[    9.384370] i2c /dev entries driver
[    9.402908] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[   10.895765] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Béla
Ham Radio callsign: HA5DI

"Amateur Radio: The First Technology-Based Social Network."

Offline curaga

  • Administrator
  • Hero Member
  • *****
  • Posts: 11041
Re: Bootcodes of Picore6.0
« Reply #26 on: February 17, 2015, 04:07:05 AM »
So in all cases, the kernel took 3s. How long did the bootloader take?
The only barriers that can stop you are the ones you create yourself.

Offline bmarkus

  • Administrator
  • Hero Member
  • *****
  • Posts: 7183
    • My Community Forum
Re: Bootcodes of Picore6.0
« Reply #27 on: February 17, 2015, 05:13:10 AM »
So in all cases, the kernel took 3s. How long did the bootloader take?

Do not know how to measure, at least in home environment  :(

First GPU is started, than CPU is booted by GPU, see boot process:

http://wiki.beyondlogic.org/index.php?title=Understanding_RaspberryPi_Boot_Process
 
I do not find reference how long it takes, but it is not under our control. Few secs.
Béla
Ham Radio callsign: HA5DI

"Amateur Radio: The First Technology-Based Social Network."

Offline andriusr

  • Newbie
  • *
  • Posts: 34
Re: Bootcodes of Picore6.0
« Reply #28 on: February 17, 2015, 12:11:01 PM »
Interesting enough, on my Rpi B+ bootcode nozswap makes booting by 1s longer (13 s instead of 12s). Any idea why?

Offline andriusr

  • Newbie
  • *
  • Posts: 34
Re: Bootcodes of Picore6.0
« Reply #29 on: February 22, 2015, 02:46:29 AM »
One more question about bootcodes.
When I create extra ext4 partition on SD card (mmcblk0p3), it is not mouted automatically at the boot. Each time after reboot I have to remount it. Is there way to mount it automatically.
Ideally, I would like to be able to use tce directory located on mmcblk0p3 with tce=mmcblk0p3/tce code, but now it does not works since this partition is not even monted.