Tiny Core Base > ODROID
Odroid-C1
roborob:
Hi Paul,
Did you follow the steps on this page?:
http://odroid.us/mediawiki/index.php?title=Step-by-step_Native_Compiling_a_Kernel
regards,
rob
roborob:
Please ignore my last post. I must have been half asleep when I wrote it.
bmarkus:
I got an Odroid C1 for testing. SD card image provided by Paul_123 works fine piCore 6.0 and a TC kernel. Actually I tested only the usual SSH version, X will follow. It has an onboard RTC with battery which works fine, so removing NORTC from boot args system gets time from RTC. Of cource if no battery installed, network time setting works as on Raspberry.
It is really fast thanks to the 4x 1.53GHz CPU and 1GByte RAM. However boot (before TC does anything) takes more time compared to normal Raspberry.
If everything goes well, first public alpha release expected in a week time.
Paul, thanks for the contribution! :)
Paul_123:
--- Quote from: bmarkus on February 19, 2015, 01:30:27 PM ---I got an Odroid C1 for testing. SD card image provided by Paul_123 works fine piCore 6.0 and a TC kernel. Actually I tested only the usual SSH version, X will follow. It has an onboard RTC with battery which works fine, so removing NORTC from boot args system gets time from RTC. Of cource if no battery installed, network time setting works as on Raspberry.
It is really fast thanks to the 4x 1.53GHz CPU and 1GByte RAM. However boot (before TC does anything) takes more time compared to normal Raspberry.
If everything goes well, first public alpha release expected in a week time.
Paul, thanks for the contribution! :)
--- End quote ---
Glad I could contribute. It was a combination of frustrating and fun.
Here is the boot time breakdown.
Uboot/bootloader 4s
Kernel Loading=4.5s
Core Init = 0.8s
Extract Tcz's = Varies with how many extensions you have loaded
After Extensions load,.takes about 4 seconds to bring the network up and get a dhcp address.
Also right now we are using stock CPU frequencies. Most say that you can overclock to 1.72 without much concern. Especially if we are not using the VPU. This kernel will probably change alot in the short term, as the driver development continues.
jncl:
Hi Béla,
I've recently got an Odroid-C1 and wanted to try using TinyCore on it. Is there an alpha release available for it yet?, or would it be possible to get a copy of the SD card image that you used please?
Cheers
Jon
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version