dCore Import Debian Packages to Mountable SCE extensions > dCore Armv7

CubieBoard 2 install

<< < (3/3)

beerstein:
hi: There are instructions available on how to make a boot able sd card for CB2. I will dig it out and describe here as soon as I can find some time next week.
ARM boots different than x86.
So,  the easier part is to make the sd card bootable. The hard part comes when the kernel needs to be modified according to the CB2 hardware.

Zendrael:
I'm curious: the packages for A10 will work for A20?

(Sorry about the doubled post above about my Cubie, the forum was giving me an error so I did a new post right afetr the first...)

curaga:
Yes, ARM is quite backwards compatible. You should be able to even use rpi packages (on a rpi base of course so the libs match).

Zendrael:
Thanks Curaga!

This is very interesting!

herschel:
Hi all,

I am desperately trying to get TC working on my Marsboard A20 but no luck still. Actually I did some progress as follows,

First I tried installing SD card using the uImage, boot.scr, uEnv.text and uCore  from this http://tinycorelinux.net/5.x/armv7/Allwinner-A10/

But I complied the u-boot for marsboard a20 from the tool chain and used u-boot-sunxi-with-spl.bin but not what is in the above link.

When booting there is only black screen.

Then I used the uImage, uEnv.txt(with some modification) from my Ubuntu 13.04 nanda partition and it worked up to a point and giving an error as follows,

Booting dCore 5.14.12.26
Running Linux kernel 3.4.90-00253-ye37d7600-dirty.
Checking boot options...Done.
Starting Udev Daemon for hotplug support...done.
modprobe: chdir(3.4.90-00253-ye37d7600-dirty): No such file or directory
modprobe: chdir(3.4.90-00253-ye37d7600-dirty): No such file or directory

What has gone wrong?

Thanks

Navigation

[0] Message Index

[*] Previous page