mnttool - errors when used in another distro

[jrm7262]

Hi,

    When using TinyCore I find the mount tool incredibly handy and thought I'd try to use in the Debian install I have.

Finally got it working, but there is one irritation left.

The mount tool works allowing me to mount and unmount media, but in the terminal window I get the following:

     fdisk: applet not found
     /usr/bin/getdisklabel: line 5: blkid: not found
     /usr/bin/getdisklabel: line 5: blkid: not found
     /usr/bin/getdisklabel: line 5: blkid: not found
     /usr/bin/getdisklabel: line 5: blkid: not found

I have fdisk installed, so I'm assuming mnttool is looking for it in a different location and that the 4 getdisklabel lines relate to fdisk not being found.

Any guidance greatly appreciated.


Kindest regards
James
j8-7

[curaga]

The TC tools are built around busybox, so if you want to use them on another distro with GNU tools, you'll need to remove the useBusybox calls.

[jrm7262]

Thank you curaga.

[jrm7262]

As a quick follow up:

Installing 'busybox-syslogd'
got rid of the 'getdisklabel' errors
and just leaves me with the 'fdisk: applet not found' error
This doesn't seem to affect mnttools functionality, all seems to be working correctly.
I shall now look into removing the 'useBusybox calls'
I'm assuming these are in the source code?

Kindest regards
James
j8-7

[curaga]

In the helper shell scripts.

[beerstein]

Hi: This topic came up when I searched for a fix of my problem:
I tried to create a microSD card with the a10Core to run Cubieboard1.
$ sudo ./mkSDcard sdc   worked fine at the beginning, but at the end there were the following
error message:
Select script.bin

         1. boards/cubieboard_script.bin
         2. boards/hyundai-a7hd-HDM_script.bin
         3. boards/hyundai-a7hd_script.bin
         4. boards/marsboard-script.bin
         5. boards/mele_HDMI_script.bin
         6. boards/mele_VGA_1280x720_script.bin
         7. boards/mele_VGA_script.bin
         8. boards/mini-x_original_script.bin
         9. boards/mk802-script.bin

Enter selection ( 1 - 9 ) or (q)uit: 1
Writing zero's to beginning of /dev/sdc
1+0 records in
1+0 records out
1048576 bytes (1.0 MB) copied, 0.371272 s, 2.8 MB/s

Partitioning /dev/sdc

Copying u-boot & spl-bin
20+1 records in
20+1 records out
20992 bytes (21 kB) copied, 0.0116037 s, 1.8 MB/s
247+1 records in
247+1 records out
253296 bytes (253 kB) copied, 0.0936527 s, 2.7 MB/s

Formatting /dev/
mkfs.vfat 3.0.3 (18 May 2009)

/dev/sdc:
mount: applet not found
Mount failed! - Abort
tc@box:~/cb2$

Can somebody please help me // thank you