dCore Import Debian Packages to Mountable SCE extensions > dCore X86

dCore - ub-dCore

<< < (2/2)

Onyarian:
ChrisJ,

Thank you for your help, but after importsce i2c-3.8.13-tinycore and xserver-xorg-video-intel and put they in sceboot.lst when I reboot it runs like before with 800x600 resolution. The error in dmesg is the same about i2c, seems perhaps another thing?

Jason W:
Re tcWbarConf:
I see that ub-dCore shows it in cpanel but dCore does not.  I looked at the cpanel code and it looks for the tc-wbarconf binary and then shows the button.  Should work in both, it is in the path of both dCore and ub-dCore but does not show in dCore.  I will keep looking for a solution, though it should just work in both.

Onyarian:
Hi,

I  have substitute xorg-all with xorg-intel with the same resuts.

sceboot.lst:

--- Quote ---Xprogs
openbox
jdudesktop
i2c-KERNEL
xorg-intel

--- End quote ---

booting with bootcode text:

--- Quote ---No state is present for card Intel
Found hardware: "HDA-Intel" "Realtec ALC269" "HDA:10ec...." "0x105b" "0x0d5d"
Hardware is initialized using a generic method
No sate is present for card Intel

--- End quote ---

dmesg:

--- Quote ---...
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel GMA3150 Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 8192K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[drm] Initialized drm 1.1.0 20060810
cfg80211: Calling CRDA to update world regulatory domain
i915: Unknown symbol i2c_bit_algo (err 0)
snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
ath: phy0: ASPM enabled: 0x42
ath: EEPROM regdomain: 0x65
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x65
ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xf8460000, irq=17
device-mapper: ioctl: 4.23.1-ioctl (2012-12-18) initialised: dm-devel@redhat.com
atl1c 0000:03:00.0: irq 44 for MSI/MSI-X
EXT4-fs (sda2): mounting ext3 file system using the ext4 subsystem
EXT4-fs (sda2): warning: maximal mount count reached, running e2fsck is recommended
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
i915: Unknown symbol i2c_bit_algo (err 0)

--- End quote ---

lsmod:

--- Quote ---...
drm                   143360  1 drm_kms_helper
intel_agp              12288  0
intel_gtt              16384  2 intel_agp
agpgart                24576  3 drm,intel_agp,intel_gtt
squashfs               24576  9
microcode              12288  0
video                  16384  0
wmi                    12288  0
backlight              12288  1 video
pcspkr                 12288  0
battery                16384  0
ac                     12288  0
serio_raw              12288  0
lpc_ich                16384  0
atl1c                  28672  0
mfd_core               12288  1 lpc_ich
loop                   20480  18
acpi_cpufreq           12288  0
mperf                  12288  1 acpi_cpufreq

--- End quote ---

and finally installed (from control panel-system data):

--- Quote ---...
hicolor-icon-theme
i2c-3.8.13-tinycore
ifupdown
...
x11-common
xfe
xfonts-utils
xkb-data
Xprogs
xserver-xorg-core
xserver-xorg-input-vmmouse
xserver-xorg-input-wacom
xserver-xorg-video-intel
Xtc
xterm
zlib1g

--- End quote ---

hope it helps to localize the problem.

Jason W:
Onyarian,

Re-import graphics-3.8.13-tinycore again, I forgot to include the i2c-3.8.13-tinycore package as a dependency.  Hopefully this fixes it, my bad if so.

Onyarian:
Fine Jason!

That was it! Now I have the 1024x600 resolution in the laptops.

Thanks!

Navigation

[0] Message Index

[*] Previous page