WelcomeWelcome | FAQFAQ | DownloadsDownloads | WikiWiki
« previous next »
Pages: [1]   Go Down

Author Topic: TC in Win 8 Hyper-V  (Read 12784 times)

Offline daenar

  • Newbie
  • *
  • Posts: 6
TC in Win 8 Hyper-V
« on: November 11, 2012, 02:44:25 AM »
I just installed Tiny Core in a Windows 8 Hyper-V.  It came up fast and easy.  However, when I click on the Apps icon it gives an error message about "Couldn't load mirror list. Maybe network issue?" if I ask to use the faster mirror.

Using ifconfig it lists things as local loopback with an address of 127.0.0.1.  How do I get it to make a connection to my network?

Thank you.
Logged

Offline daenar

  • Newbie
  • *
  • Posts: 6
Re: TC in Win 8 Hyper-V
« Reply #1 on: November 11, 2012, 02:55:47 AM »
I should probably add that before I made the VM, I created a virtual switch and set it to external.  I did select that switch when I created the VM.  That should be all I need from the VM side, I think?
Logged

Offline Rich

  • Administrator
  • Hero Member
  • *****
  • Posts: 11703
Re: TC in Win 8 Hyper-V
« Reply #2 on: November 11, 2012, 07:45:22 AM »
Hi daenar
Click on  ControlPanel->Network
Logged

Offline daenar

  • Newbie
  • *
  • Posts: 6
Re: TC in Win 8 Hyper-V
« Reply #3 on: November 11, 2012, 11:31:39 AM »
Did that.  Tried to click the Use DHCP Broadcast "yes" button and apply, but it doesn't do anything.
Logged

Offline daenar

  • Newbie
  • *
  • Posts: 6
Re: TC in Win 8 Hyper-V
« Reply #4 on: November 11, 2012, 11:36:59 AM »
Also tried manually assigning an IP to no effect.  Using the ifconfig command it only lists the "lo" device, nothing in there about eth0?
Logged

Offline curaga

  • Administrator
  • Hero Member
  • *****
  • Posts: 11049
Re: TC in Win 8 Hyper-V
« Reply #5 on: November 11, 2012, 12:11:51 PM »
Well, what network card does it emulate?
Logged
The only barriers that can stop you are the ones you create yourself.

Offline tinypoodle

  • Hero Member
  • *****
  • Posts: 3857
Re: TC in Win 8 Hyper-V
« Reply #6 on: November 11, 2012, 12:38:42 PM »
What about "ifconfig -a"?
Logged
"Software gets slower faster than hardware gets faster." Niklaus Wirth - A Plea for Lean Software (1995)

Offline daenar

  • Newbie
  • *
  • Posts: 6
Re: TC in Win 8 Hyper-V
« Reply #7 on: November 11, 2012, 01:37:18 PM »
The Hyper-V external adapter is listed as: Realtek PCIe GBE Family Controller.

"ifconfig -a" lists two devices: dummy0 and lo.  dummy0 lists link encap:Ethernet and a MAC address, but the MAC looks nothing like the one coming off the Hyper-V MAC address.
Logged

Offline daenar

  • Newbie
  • *
  • Posts: 6
Re: TC in Win 8 Hyper-V
« Reply #8 on: November 11, 2012, 03:10:54 PM »
Ah ha!  Based off a tip from http://www.eightforums.com/tutorials/5078-hyper-v-create-linux-virtual-machine-windows-8-a.html?ltr=Hgeneral, I deleted the network adapter in the Hyper-V settings.  I then did an "Add Hardware" and selected "Legacy Network Adapter" and connected that to the external virtual switch I originally created.

That done, I have internet access.  Yeay.

Thank you all for the replies and interest.
Logged

Offline sebus

  • Jr. Member
  • **
  • Posts: 96
Re: TC in Win 8 Hyper-V
« Reply #9 on: March 06, 2014, 03:04:18 PM »
TCL 64-bit works perfectly on Hyper-V 2012 R2.

Moved my VM from Vmware to Hyper-V 2012 R2 & it booted with no issues.

It is the ONLY Linux based VM that I had ZERO problems with after the move!

sebus
Logged

Offline xk2600

  • Newbie
  • *
  • Posts: 4
Re: TC in Win 8 Hyper-V
« Reply #10 on: March 31, 2014, 09:22:51 PM »
What version? 5.2?
Logged
Pages: [1]   Go Up
« previous next »