WelcomeWelcome | FAQFAQ | DownloadsDownloads | WikiWiki

Author Topic: moxa card not communicate  (Read 24877 times)

Online Rich

  • Administrator
  • Hero Member
  • *****
  • Posts: 11267
Re: moxa card not communicate
« Reply #15 on: January 16, 2014, 10:43:01 AM »
Hi malikawan
Quote
... is there any way to copy terminal (aterm) text ...
While holding down the left mouse button, drag the mouse across the text you wish to copy .
Click the center mouse button to paste.

Offline malikawan

  • Full Member
  • ***
  • Posts: 243
Re: moxa card not communicate
« Reply #16 on: January 16, 2014, 10:49:28 AM »
Hi malikawan
Quote
... is there any way to copy terminal (aterm) text ...
While holding down the left mouse button, drag the mouse across the text you wish to copy .
Click the center mouse button to paste.

Rich thanx for guiding sorry to say if i use laptop then what is the replacement of mouse centre button

Offline tinypoodle

  • Hero Member
  • *****
  • Posts: 3857
Re: moxa card not communicate
« Reply #17 on: January 16, 2014, 11:06:35 AM »
Do you even read the content of links posted in reply to your questions??   ::)

Laptop or not laptop does not make any difference.

Instead post output of:
Code: [Select]
lspci -nnk|nc solusipse.net 9999
"Software gets slower faster than hardware gets faster." Niklaus Wirth - A Plea for Lean Software (1995)

Offline malikawan

  • Full Member
  • ***
  • Posts: 243
Re: moxa card not communicate
« Reply #18 on: January 24, 2014, 12:45:09 AM »
Do you even read the content of links posted in reply to your questions??   ::)

Laptop or not laptop does not make any difference.

Instead post output of:
Code: [Select]
lspci -nnk|nc solusipse.net 9999





00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0100] (rev 09)
   Subsystem: Intel Corporation Device [8086:201b]
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0102] (rev 09)
   Subsystem: Intel Corporation Device [8086:201b]
00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
   Subsystem: Intel Corporation Device [8086:201b]
00:19.0 Ethernet controller [0200]: Intel Corporation 82579V Gigabit Network Connection [8086:1503] (rev 05)
   Subsystem: Intel Corporation Device [8086:201b]
   Kernel driver in use: e1000e
00:1a.0 USB Controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05)
   Subsystem: Intel Corporation Device [8086:201b]
   Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05)
   Subsystem: Intel Corporation Device [8086:201b]
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5)
   Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b5)
   Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b5)
   Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05)
   Subsystem: Intel Corporation Device [8086:201b]
   Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge [0601]: Intel Corporation Z68 Express Chipset Family LPC Controller [8086:1c44] (rev 05)
   Subsystem: Intel Corporation Device [8086:201b]
00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c02] (rev 05)
   Subsystem: Intel Corporation Device [8086:201b]
   Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05)
   Subsystem: Intel Corporation Device [8086:201b]
01:00.0 PCI bridge [0604]: Integrated Technology Express, Inc. Device [1283:8892] (rev 30)
02:00.0 Serial controller [0700]: Moxa Technologies Co Ltd CP-114UL (4-port RS-232/422/485 Smart Universal PCI Serial Board) [1393:1143]
   Subsystem: Moxa Technologies Co Ltd CP-114UL (4-port RS-232/422/485 Smart Universal PCI Serial Board) [1393:1143]
03:00.0 USB Controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 03)
   Subsystem: Intel Corporation Device [8086:201b]
   Kernel driver in use: xhci_hcd
04:00.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6315 Series Firewire Controller [1106:3403] (rev 01)
   Subsystem: Intel Corporation Device [8086:201b]

Offline malikawan

  • Full Member
  • ***
  • Posts: 243
Re: moxa card not communicate
« Reply #19 on: January 24, 2014, 12:48:42 AM »
02:00.0 Serial controller [0700]: Moxa Technologies Co Ltd CP-114UL (4-port RS-232/422/485 Smart Universal PCI Serial Board) [1393:1143]
   Subsystem: Moxa Technologies Co Ltd CP-114UL (4-port RS-232/422/485 Smart Universal PCI Serial Board) [1393:1143]

how to install moxa pci serial card driver in tiny core

Offline Juanito

  • Administrator
  • Hero Member
  • *****
  • Posts: 14587
Re: moxa card not communicate
« Reply #20 on: January 24, 2014, 01:59:19 AM »
Did you try the Multiport Serial Boards Driver for Linux 2.4/2.6  (146.99 KB) on the moxa web site?

Offline tinypoodle

  • Hero Member
  • *****
  • Posts: 3857
Re: moxa card not communicate
« Reply #21 on: January 24, 2014, 02:11:38 AM »
http://cateee.net/lkddb/web-lkddb/MOXA_SMARTIO.html

Quote
depends on: CONFIG_SERIAL_NONSTANDARD && ( CONFIG_PCI || CONFIG_EISA || CONFIG_ISA )

http://tinycorelinux.net/5.x/x86/release/src/kernel/config-3.8.13-tinycore

# CONFIG_EISA is not set
# CONFIG_SERIAL_NONSTANDARD is not set
"Software gets slower faster than hardware gets faster." Niklaus Wirth - A Plea for Lean Software (1995)

Offline malikawan

  • Full Member
  • ***
  • Posts: 243
Re: moxa card not communicate
« Reply #22 on: January 24, 2014, 02:22:27 AM »
Did you try the Multiport Serial Boards Driver for Linux 2.4/2.6  (146.99 KB) on the moxa web site?

i installed these but give error

i want to install on Tiny Core V 4.7.7

Offline malikawan

  • Full Member
  • ***
  • Posts: 243
Re: moxa card not communicate
« Reply #23 on: January 24, 2014, 02:25:21 AM »
http://cateee.net/lkddb/web-lkddb/MOXA_SMARTIO.html

Quote
depends on: CONFIG_SERIAL_NONSTANDARD && ( CONFIG_PCI || CONFIG_EISA || CONFIG_ISA )

http://tinycorelinux.net/5.x/x86/release/src/kernel/config-3.8.13-tinycore

# CONFIG_EISA is not set
# CONFIG_SERIAL_NONSTANDARD is not set
[/quote


Sorry tinypoodle i donot understand what i do

Offline tinypoodle

  • Hero Member
  • *****
  • Posts: 3857
Re: moxa card not communicate
« Reply #24 on: January 24, 2014, 02:35:33 AM »
You'd need to recompile the kernel with

CONFIG_SERIAL_NONSTANDARD=y
CONFIG_EISA=y

and

Quote
Say Y here if you have a Moxa SmartIO multiport serial card and/or want to help develop a new version of this driver.

This is upgraded (1.9.1) driver from original Moxa drivers with changes finally resulting in PCI probing.

This driver can also be built as a module. The module will be called mxser. If you want to do that, say M here.

for

CONFIG_MOXA_SMARTIO
"Software gets slower faster than hardware gets faster." Niklaus Wirth - A Plea for Lean Software (1995)

Offline malikawan

  • Full Member
  • ***
  • Posts: 243
Re: moxa card not communicate
« Reply #25 on: January 24, 2014, 02:42:50 AM »
You'd need to recompile the kernel with

CONFIG_SERIAL_NONSTANDARD=y
CONFIG_EISA=y

and

Quote
Say Y here if you have a Moxa SmartIO multiport serial card and/or want to help develop a new version of this driver.

This is upgraded (1.9.1) driver from original Moxa drivers with changes finally resulting in PCI probing.

This driver can also be built as a module. The module will be called mxser. If you want to do that, say M here.

for

CONFIG_MOXA_SMARTIO

thanx tinypoodle if u help me because i m not able to recompile kernel plz if u help me

Offline malikawan

  • Full Member
  • ***
  • Posts: 243
Re: moxa card not communicate
« Reply #26 on: January 24, 2014, 02:48:16 AM »
plz tinypoodle if u create the driver to be built as a module for me i m very thankful to u

Offline malikawan

  • Full Member
  • ***
  • Posts: 243
Re: moxa card not communicate
« Reply #27 on: January 24, 2014, 03:09:22 AM »
plz any one i need help

Offline tinypoodle

  • Hero Member
  • *****
  • Posts: 3857
Re: moxa card not communicate
« Reply #28 on: January 24, 2014, 03:27:22 AM »
My impression is that you may probably need to recompile the kernel for EISA support, even if you prefer the kernel MOXA_SMARTIO driver as module.

No idea about out of tree driver from vendor, you would have to consult their documentation and or support.
"Software gets slower faster than hardware gets faster." Niklaus Wirth - A Plea for Lean Software (1995)

Offline Juanito

  • Administrator
  • Hero Member
  • *****
  • Posts: 14587
Re: moxa card not communicate
« Reply #29 on: January 24, 2014, 05:44:36 AM »
plz any one i need help

If you look in the wiki and the recent thread "G84M grapics card driver kernel/Xorg" it explains how to recompile the kernel, did you try following these instructions?