Tiny Core Base > Corepure64

Corepure64 v5.1

<< < (2/5) > >>

killerhippy:
I expected that, too, unfortunately it doesn't.

I installed xf86-input-evdev, I even rebooted, still no change.
Mouse doesn't move.

Xorg.0.log

--- Code: ---[   153.048]
X.Org X Server 1.14.4
Release Date: 2013-10-31
[   153.048] X Protocol Version 11, Revision 0
[   153.048] Build Operating System: Linux 3.8.13-tinycore64 x86_64
[   153.048] Current Operating System: Linux box 3.8.13-tinycore64 #777 SMP Fri Oct 18 15:13:45 UTC 2013 x86_64
[   153.048] Kernel command line: initrd=/tcv5.1-64/rootfs64.gz,/tcv5.1-64/modules64.gz text loglevel=3 noswap lst=ontcv5.1-64pure64.lst tce=sda1/tcv5.1-64/tce opt=sda1 home=sda1 BOOT_IMAGE=/tcv5.1-64/vmlinuz64
[   153.048] Build Date: 12 November 2013  04:25:28PM
[   153.048] 
[   153.048] Current version of pixman: 0.30.2
[   153.048]    Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[   153.048] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   153.049] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jan  3 13:27:50 2014
[   153.049] (==) Using system config directory "/usr/local/share/X11/xorg.conf.d"
[   153.050] (==) No Layout section.  Using the first Screen section.
[   153.050] (==) No screen section available. Using defaults.
[   153.050] (**) |-->Screen "Default Screen Section" (0)
[   153.050] (**) |   |-->Monitor "<default monitor>"
[   153.050] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
[   153.050] (==) Automatically adding devices
[   153.050] (==) Automatically enabling devices
[   153.050] (==) Automatically adding GPU devices
[   153.050] (WW) The directory "/usr/local/lib/X11/fonts/misc/" does not exist.
[   153.050]    Entry deleted from font path.
[   153.050] (WW) The directory "/usr/local/lib/X11/fonts/TTF/" does not exist.
[   153.050]    Entry deleted from font path.
[   153.050] (WW) The directory "/usr/local/lib/X11/fonts/OTF/" does not exist.
[   153.050]    Entry deleted from font path.
[   153.050] (WW) The directory "/usr/local/lib/X11/fonts/Type1/" does not exist.
[   153.050]    Entry deleted from font path.
[   153.050] (WW) The directory "/usr/local/lib/X11/fonts/100dpi/" does not exist.
[   153.050]    Entry deleted from font path.
[   153.051] (WW) The directory "/usr/local/lib/X11/fonts/75dpi/" does not exist.
[   153.051]    Entry deleted from font path.
[   153.051] (==) FontPath set to:

 [   153.051] (==) ModulePath set to "/usr/local/lib/xorg/modules"
[   153.051] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
[   153.051] (II) Loader magic: 0x7a9ce0
[   153.051] (II) Module ABI versions:
[   153.051]    X.Org ANSI C Emulation: 0.4
[   153.051]    X.Org Video Driver: 14.1
[   153.051]    X.Org XInput driver : 19.1
[   153.051]    X.Org Server Extension : 7.0
[   153.052] (II) xfree86: Adding drm device (/dev/dri/card0)
[   153.055] (--) PCI:*(0:0:2:0) 8086:2772:1849:2772 rev 2, Mem @ 0xfea80000/524288, 0xe0000000/268435456, 0xfea40000/262144, I/O @ 0x0000dc00/8
[   153.055] (--) PCI: (0:3:0:0) 109e:036e:0000:0000 rev 2, Mem @ 0xfdffe000/4096
[   153.055] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   153.055] Initializing built-in extension Generic Event Extension
[   153.055] Initializing built-in extension SHAPE
[   153.055] Initializing built-in extension MIT-SHM
[   153.055] Initializing built-in extension XInputExtension
[   153.055] Initializing built-in extension XTEST
[   153.055] Initializing built-in extension BIG-REQUESTS
[   153.055] Initializing built-in extension SYNC
[   153.055] Initializing built-in extension XKEYBOARD
[   153.055] Initializing built-in extension XC-MISC
[   153.055] Initializing built-in extension XINERAMA
[   153.055] Initializing built-in extension XFIXES
[   153.055] Initializing built-in extension RENDER
[   153.055] Initializing built-in extension RANDR
[   153.055] Initializing built-in extension COMPOSITE
[   153.056] Initializing built-in extension DAMAGE
[   153.056] Initializing built-in extension MIT-SCREEN-SAVER
[   153.056] Initializing built-in extension DOUBLE-BUFFER
[   153.056] Initializing built-in extension RECORD
[   153.056] Initializing built-in extension DPMS
[   153.056] Initializing built-in extension X-Resource
[   153.056] Initializing built-in extension XVideo
[   153.056] Initializing built-in extension XVideo-MotionCompensation
[   153.056] Initializing built-in extension XFree86-VidModeExtension
[   153.056] Initializing built-in extension XFree86-DGA
[   153.056] Initializing built-in extension XFree86-DRI
[   153.056] Initializing built-in extension DRI2
[   153.056] (II) "glx" will be loaded by default.
[   153.056] (II) LoadModule: "dri2"
[   153.056] (II) Module "dri2" already built-in
[   153.056] (II) LoadModule: "glamoregl"
[   153.056] (II) Loading /usr/local/lib/xorg/modules/libglamoregl.so
[   153.057] (EE) Failed to load /usr/local/lib/xorg/modules/libglamoregl.so: libEGL.so.1: cannot open shared object file: No such file or directory
  [   153.057] (EE) Failed to load /usr/local/lib/xorg/modules/libglamoregl.so: libEGL.so.1: cannot open shared object file: No such file or directory
[   153.057] (II) UnloadModule: "glamoregl"
[   153.057] (II) Unloading glamoregl
[   153.057] (EE) Failed to load module "glamoregl" (loader failed, 7)
[   153.057] (II) LoadModule: "glx"
[   153.058] (II) Loading /usr/local/lib/xorg/modules/extensions/libglx.so
[   153.068] (II) Module glx: vendor="X.Org Foundation"
[   153.068]    compiled for 1.14.4, module version = 1.0.0
[   153.068]    ABI class: X.Org Server Extension, version 7.0
[   153.068] (==) AIGLX enabled
[   153.068] Loading extension GLX
[   153.068] (==) Matched intel as autoconfigured driver 0
[   153.068] (==) Matched intel as autoconfigured driver 1
[   153.068] (==) Matched vesa as autoconfigured driver 2
[   153.068] (==) Matched modesetting as autoconfigured driver 3
[   153.068] (==) Matched fbdev as autoconfigured driver 4
[   153.068] (==) Assigned the driver to the xf86ConfigLayout
[   153.068] (II) LoadModule: "intel"
[   153.069] (II) Loading /usr/local/lib/xorg/modules/drivers/intel_drv.so
[   153.090] (II) Module intel: vendor="X.Org Foundation"
[   153.090]    compiled for 1.14.4, module version = 2.21.15
[   153.090]    Module class: X.Org Video Driver
[   153.090]    ABI class: X.Org Video Driver, version 14.1
[   153.090] (II) LoadModule: "vesa"
[   153.091] (WW) Warning, couldn't open module vesa
[   153.091] (II) UnloadModule: "vesa"
[   153.091] (II) Unloading vesa
[   153.091] (EE) Failed to load module "vesa" (module does not exist, 0)
[   153.091] (II) LoadModule: "modesetting"
[   153.092] (WW) Warning, couldn't open module modesetting
[   153.092] (II) UnloadModule: "modesetting"
[   153.092] (II) Unloading modesetting
[   153.092] (EE) Failed to load module "modesetting" (module does not exist, 0)
[   153.092] (II) LoadModule: "fbdev"
[   153.092] (WW) Warning, couldn't open module fbdev
[   153.092] (II) UnloadModule: "fbdev"
[   153.092] (II) Unloading fbdev
[   153.092] (EE) Failed to load module "fbdev" (module does not exist, 0)
[   153.092] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
        i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
        915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
        Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
        GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, HD Graphics,
        HD Graphics 2000, HD Graphics 3000, HD Graphics 2500,
        HD Graphics 4000, HD Graphics P4000, HD Graphics 4600,
        HD Graphics 5000, HD Graphics P4600/P4700, Iris(TM) Graphics 5100,
        HD Graphics 4400, HD Graphics 4200, Iris(TM) Pro Graphics 5200
[   153.093] (--) using VT number 2

 [   153.132] (II) intel(0): Creating default Display subsection in Screen section
        "Default Screen Section" for depth/fbbpp 24/32
[   153.132] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[   153.133] (==) intel(0): RGB weight 888
[   153.133] (==) intel(0): Default visual is TrueColor
[   153.133] (--) intel(0): Integrated Graphics Chipset: Intel(R) 945G
[   153.133] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3
[   153.134] (**) intel(0): Framebuffer tiled
[   153.134] (**) intel(0): Pixmaps tiled
[   153.134] (**) intel(0): "Tear free" disabled
[   153.134] (**) intel(0): Forcing per-crtc-pixmaps? no
[   153.134] (II) intel(0): Output VGA1 has no monitor section
[   153.134] (--) intel(0): Output VGA1 using initial mode 1920x1080 on pipe 0
[   153.134] (==) intel(0): DPI set to (96, 96)
[   153.134] (II) Loading sub module "dri2"
[   153.134] (II) LoadModule: "dri2"
[   153.134] (II) Module "dri2" already built-in
[   153.134] (==) Depth 24 pixmap format is 32 bpp
[   153.147] (II) intel(0): SNA initialized with Alviso (gen3) backend
[   153.147] (==) intel(0): Backing store disabled
[   153.147] (==) intel(0): Silken mouse enabled
[   153.147] (II) intel(0): HW Cursor enabled
[   153.147] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   153.147] (==) intel(0): DPMS enabled
[   153.152] (II) intel(0): [XvMC] i915_xvmc driver initialized.
[   153.152] (II) intel(0): [DRI2] Setup complete
[   153.152] (II) intel(0): [DRI2]   DRI driver: i915
[   153.152] (II) intel(0): direct rendering: DRI2 Enabled
[   153.152] (==) intel(0): hotplug detection: "enabled"
[   153.152] (--) RandR disabled
[   153.175] (EE) AIGLX error: dlopen of /usr/local/lib/dri/i915_dri.so failed (/usr/local/lib/dri/i915_dri.so: cannot open shared object file: No such file or directory)
[   153.175] (EE) AIGLX: reverting to software rendering
[   153.175] (II) AIGLX: Screen 0 is not DRI capable
[   153.175] (EE) AIGLX error: dlopen of /usr/local/lib/dri/swrast_dri.so failed (/usr/local/lib/dri/swrast_dri.so: cannot open shared object file: No such file or directory)
    [   153.175] (EE) GLX: could not load software renderer
[   153.175] (II) GLX: no usable GL providers found for screen 0
[   153.193] (II) intel(0): switch to mode 1920x1080@60.0 on pipe 0 using VGA1, position (0, 0), rotation normal
[   153.206] (II) intel(0): Setting screen physical size to 508 x 285
[   153.339] (II) config/udev: Adding drm device (/dev/dri/card0)
[   153.366] 6 XSELINUXs still allocated at reset
[   153.366] SCREEN: 0 objects of 256 bytes = 0 total bytes 0 private allocs
[   153.366] DEVICE: 0 objects of 96 bytes = 0 total bytes 0 private allocs
[   153.366] CLIENT: 0 objects of 192 bytes = 0 total bytes 0 private allocs
[   153.366] WINDOW: 0 objects of 72 bytes = 0 total bytes 0 private allocs
[   153.366] PIXMAP: 1 objects of 48 bytes = 48 total bytes 0 private allocs
[   153.366] GC: 4 objects of 88 bytes = 352 total bytes 0 private allocs
[   153.366] CURSOR: 1 objects of 8 bytes = 8 total bytes 0 private allocs
[   153.366] DBE_WINDOW: 0 objects of 24 bytes = 0 total bytes 0 private allocs
[   153.366] GLYPH: 0 objects of 24 bytes = 0 total bytes 0 private allocs
[   153.366] TOTAL: 6 objects, 408 bytes, 0 allocs
[   153.366] 1 PIXMAPs still allocated at reset
[   153.366] PIXMAP: 1 objects of 48 bytes = 48 total bytes 0 private allocs
[   153.366] GC: 4 objects of 88 bytes = 352 total bytes 0 private allocs
[   153.366] CURSOR: 1 objects of 8 bytes = 8 total bytes 0 private allocs
[   153.366] DBE_WINDOW: 0 objects of 24 bytes = 0 total bytes 0 private allocs
[   153.366] GLYPH: 0 objects of 24 bytes = 0 total bytes 0 private allocs
[   153.366] TOTAL: 6 objects, 408 bytes, 0 allocs
[   153.366] 4 GCs still allocated at reset
[   153.366] GC: 4 objects of 88 bytes = 352 total bytes 0 private allocs
[   153.366] CURSOR: 1 objects of 8 bytes = 8 total bytes 0 private allocs
[   153.366] DBE_WINDOW: 0 objects of 24 bytes = 0 total bytes 0 private allocs
[   153.366] GLYPH: 0 objects of 24 bytes = 0 total bytes 0 private allocs
[   153.366] TOTAL: 5 objects, 360 bytes, 0 allocs
[   153.366] 1 CURSORs still allocated at reset
[   153.367] CURSOR: 1 objects of 8 bytes = 8 total bytes 0 private allocs
[   153.367] DBE_WINDOW: 0 objects of 24 bytes = 0 total bytes 0 private allocs
[   153.367] GLYPH: 0 objects of 24 bytes = 0 total bytes 0 private allocs
[   153.367] TOTAL: 1 objects, 8 bytes, 0 allocs
[   153.367] 1 CURSOR_BITSs still allocated at reset
[   153.367] DBE_WINDOW: 0 objects of 24 bytes = 0 total bytes 0 private allocs
[   153.367] GLYPH: 0 objects of 24 bytes = 0 total bytes 0 private allocs
[   153.367] TOTAL: 0 objects, 0 bytes, 0 allocs
[   153.370] (II) intel(0): SNA initialized with Alviso (gen3) backend
[   153.371] (II) intel(0): HW Cursor enabled
[   153.371] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   153.371] (==) intel(0): DPMS enabled
[   153.371] (II) intel(0): [XvMC] i915_xvmc driver initialized.
[   153.371] (II) intel(0): [DRI2] Setup complete
[   153.371] (II) intel(0): [DRI2]   DRI driver: i915
[   153.371] (II) intel(0): direct rendering: DRI2 Enabled
[   153.371] (==) intel(0): hotplug detection: "enabled"
[   153.371] (--) RandR disabled
[   153.395] (EE) AIGLX error: dlopen of /usr/local/lib/dri/i915_dri.so failed (/usr/local/lib/dri/i915_dri.so: cannot open shared object file: No such file or directory)
[   153.395] (EE) AIGLX: reverting to software rendering
[   153.395] (II) AIGLX: Screen 0 is not DRI capable
[   153.396] (EE) AIGLX error: dlopen of /usr/local/lib/dri/swrast_dri.so failed (/usr/local/lib/dri/swrast_dri.so: cannot open shared object file: No such file or directory)
[   153.396] (EE) GLX: could not load software renderer
[   153.396] (II) GLX: no usable GL providers found for screen 0
[   153.397] (II) intel(0): switch to mode 1920x1080@60.0 on pipe 0 using VGA1, position (0, 0), rotation normal
[   153.426] (II) intel(0): Setting screen physical size to 508 x 285
[   153.522] (II) config/udev: Adding drm device (/dev/dri/card0)

--- End code ---

Xorg-server refuses to load keyboard, mouse and evdev modules which I do have installed:
xf86-input-evdev.tcz,  xf86-input-keyboard.tcz  and xf86-input-mouse.tcz

If of interest, I also have a dmesg output available.

Juanito:
How did you download the extensions?

Xorg-7.7.tcz.dep has Xorg-fonts, xf86-video-vesa and xf86-video-fbdev, but as per your Xorg log, these are not loaded.

xf86-video-intel.tcz.dep has graphics-KERNEL and glamor-egl, but these do not appear to be loaded either.

Juanito:
Note that if you want Xorg to use xf86-input-mouse and xf86-input-keyboard rather than xf86-input-evdev, you need to create an /etc/X11/xorg.conf with this in it:
--- Code: ---Section "ServerFlags"
Option "AutoAddDevices" "false"
EndSection

--- End code ---

..however, I think a lack of fonts is the problem at the moment

killerhippy:
I use tce-ab to (s)earch or look which (p)rovides keywords to find packages. If found, I (i)nstall it, this also cares for dependencies.
What about dependencies of dependencies? I think I looked for  xorg-3d as initial point to get xorg-server installed.

I have a lot at optional/,  libXfont.tcz* is there, too.

My ontcv5.1-64pure64.lst looks like this:

--- Code: ---xorg-server.tcz
wbar.tcz
Xlibs.tcz
Xprogs.tcz
graphics-3.8.13-tinycore64.tcz
flwm.tcz
xf86-video-intel.tcz
xf86-input-keyboard.tcz
xkeyboard-config.tcz
xf86-input-mouse.tcz
Xorg-7.7-bin.tcz
libxkbfile.tcz
openssh.tcz
xf86-input-evdev.tcz

--- End code ---

I don't know why Xorg-fonts aren't loaded but, xf86-video-vesa and xf86-video-fbdev are not yet installed.


BTW: I don't want xf86-input-mouse and xf86-input-keyboard, I just intalled those to see, if it runs X with these.

Meanwhile I gave it try with this xorg.conf:

--- Code: ---Section "InputClass"
        Identifier "german keyboard"
        Driver "evdev"
        MatchIsKeyboard "on"
        Option "xkbmodel" "evdev"
        Option "xkblayout" "de"
        Option "xkbvariant" "deadgraveacute"
        Option "xkbrules" "base"
        Option "xkboptions" "compose:menu,terminate:ctrl_alt_bksp"
EndSection

Section "InputDevice"
        Identifier "mouse"
        Driver "evdev"
        Option "Device"   "/dev/input/mice"
        Option "CorePointer"
EndSection

Section "ServerFlags"
        Option "DontZap" "false"
EndSection

--- End code ---
...no luck neither, mouse doesn't move. - BTW: How should I test keybord without open windows?

look at "grep mouse /var/log/Xorg.0.log":

--- Code: ---[   225.990] (==) |-->Input Device "mouse"
[   226.089] (==) intel(0): Silken mouse enabled
[   226.282] (II) Using input driver 'evdev' for 'mouse'
[   226.282] (**) mouse: always reports core events
[   226.282] (**) evdev: mouse: Device: "/dev/input/mice"
[   226.282] (EE) evdev: mouse: ioctl EVIOCGBIT for bitmask in EvdevOpenMTDev failed: Inappropriate ioctl for device
[   226.282] (EE) mouse: Couldn't open mtdev device
[   226.320] (EE) PreInit returned 2 for "mouse"
[   226.508] (II) Using input driver 'evdev' for 'mouse'
[   226.508] (**) mouse: always reports core events
[   226.508] (**) evdev: mouse: Device: "/dev/input/mice"
[   226.508] (EE) evdev: mouse: ioctl EVIOCGBIT for bitmask in EvdevOpenMTDev failed: Inappropriate ioctl for device
[   226.508] (EE) mouse: Couldn't open mtdev device
[   226.563] (EE) PreInit returned 2 for "mouse"

--- End code ---

I'll give it another shot with installing xf86-video-vesa and xf86-video-fbdev...

Juanito:

--- Quote from: killerhippy on January 03, 2014, 07:25:11 AM ---What about dependencies of dependencies?

--- End quote ---
..they should be downloaded and loaded automatically.


--- Quote ---I have a lot at optional/,  libXfont.tcz* is there, too.

--- End quote ---
OK, but is Xorg-fonts loaded? Try "tce-load -i Xorg-fonts" to check


--- Quote ---Meanwhile I gave it try with this xorg.conf:

--- End quote ---
For trouble-shooting purposes it would be better to delete xorg.conf and try "confless"


--- Quote ---I'll give it another shot with installing xf86-video-vesa and xf86-video-fbdev...

--- End quote ---
If you have intel hardware and xf86-video-intel is loaded, these are not required - however if you used tce-load to download and load Xorg-7.7-3d then these should have been downloaded and loaded automatically.

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version