I have installed minicom.tcz & usb-utils.tcz
lsusb shows
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 046d:c077 Logitech, Inc.
Bus 001 Device 004: ID 04f3:0103 Elan Microelectronics Corp.
Bus 002 Device 005: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port
I also created directory /etc/usb_modeswitch.d
containing file 067b\:2303 which has
DefaultVendor= 0x067b
DefaultProduct=0x2303
I took a cue from
http://ubuntuforums.org/archive/index.php/t-1814583.html and
http://forum.tinycorelinux.net/index.php/topic,11509.msg61207/topicseen.html#msg61207 as mentioned at
http://forum.tinycorelinux.net/index.php?topic=15393.0Still that is about usb modem.
Please suggest.
Also ran 'sudo udevadm control --reload-rules' before that.
here is dmesg log when converter was inserted & ejected multiple times
r8169 0000:05:00.0: eth0: link down
r8169 0000:05:00.0: eth0: link down
r8169 0000:05:00.0: eth0: link up
oss_hdaudio 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
usbcore: registered new interface driver oss_usb
mtrr: type mismatch for e0000000,4000000 old: write-back new: write-combining
mtrr: no MTRR for e0000000,4000000 found
mtrr: type mismatch for e0000000,4000000 old: write-back new: write-combining
r8169 0000:05:00.0: eth0: link down
r8169 0000:05:00.0: eth0: link up
usb 2-1.3: new full speed USB device number 3 using ehci_hcd
usb 2-1.3: USB disconnect, device number 3
usb 2-1.2: new full speed USB device number 4 using ehci_hcd
usb 2-1.2: USB disconnect, device number 4
usb 2-1.3: new full speed USB device number 5 using ehci_hcd