Tiny Core Base > piCore Test Releases
piCore 5.0.alpha3
sbp:
Hi bmarkus
Here is a link to the image. : http://rapidshare.com/share/13300978A521499EC521F8221763E0B5
I have once again started from scratch and only installed dropbear, made a password for tc and change .filletool.lst and opt/bootlocal.sh
Dropbear is starting automatically and you login with user=tc password=nosoup4u
Once again you can't save changes to the config.txt file via SSH but it saves fine when directly connected.
You will have to mount the mmcblk0p1 first:
mount /mnt/mmcblk0p1
Hope you find the problem.
Steen
bmarkus:
Hi Steen
will take a look during the weekend.
Bela
bmarkus:
Steen
tested with your image. Procedure works correctly as expected. Logging via SSH I can add a text line to config.txt as you described. After rebooting the previously appended line is there and config.txt file time is correctly indicates time of modification. It works, can't reproduce your situation.
Regards... Bela
sbp:
Hi bmarkus
Thank you very much for looking into this.
I really had tried to understand this problem, but as you were unable to confirm even with my own image - then the problem must be at my end. That made me think it all over again, and the only difference I could see was that we used different SD-cards.
Therefore, I purchased a new card, and voila now it is working. So my old card seem to be responsible for my issue - and I will try to see if I can figure out how?
Onece again thank you for your tremendous support. Everything is fine now.
Steen
bmarkus:
Steen
glad to hear your problem solved. Still I do not understand how it happened.
Bela
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version