dCore Import Debian Packages to Mountable SCE extensions > Allwinner A10

beaglebone black?

<< < (3/4) > >>

bmarkus:
Using the same piCore 6.0alpha version on both Raspberry Pi and Beaglebone Black the first impression how fast is the Beaglebone. Few adhoc figures, RPi / BBB:

xz decompression - 1.7 / 0.6 s
xz compression - 45.4 / 17.5 s
bcrypt build - 23.3 / 7 s
WAV to FLAC conversion - 42,2 / 31,0 s

Files were copied to RAM, so SD card access did not influence result

UART:
nice.

bmarkus:
I ordered a BBB online yesterday at 3 P.M., arrived today just before 3 P.M. In the box I got not only BBB but an USB cable also. Connecting the USB cable in 10 seconds LXDE was up and running as well as its SSH and WEB servers. Debian is preinstalled in the internal 4GB flash, so don't have to waste time looking for USB cable, dowload op system, create SD card, etc. Just connect and you have it working. The USB slave port is not only for power but works as a network interface, so no need for Ethernet connection, you can connect via SSH, read docs with a browser, etc. In 10 seconds. Really nice.

bmarkus:
Few mont ago I tested WBSDR on Raspberry Pi with FUNcube Dongle, which is a smart software defined receiver with 192 kbit/s I/Q audio. RPi was too slow. CPU was used 100% but it was not able to process signal realtime.

The same on Beaglebone Black works. CPU is 50-60% with single user on a noisy 2m band segment. APRS channel reception on 144.800 MHz looks OK both on screen and listening it:



Of corse running on Core 6.0 :)

Eraks:
Hello Bmarkus and others followers.

We look forward to using Core 6.0 with BBB! How long do you make it available for us, users?

Thanks ^^

Navigation

[0] Message Index

[#] Next page

[*] Previous page