WelcomeWelcome | FAQFAQ | DownloadsDownloads | WikiWiki
« previous next »
Pages: 1 [2] 3 4   Go Down

Author Topic: WYSE V50LE dual screen setup  (Read 18553 times)

Offline tinypoodle

  • Hero Member
  • *****
  • Posts: 3857
Re: WYSE V50LE dual screen setup
« Reply #15 on: April 13, 2013, 01:22:04 PM »
Quote from: jqcore on April 13, 2013, 12:39:55 PM
[tc@box:~/via-xserver-86a-50283_src/XServer$ make
make  all-recursive
make[1]: Entering directory `/home/tc/via-xserver-86a-50283_src/XServer'
Making all in src
make[2]: Entering directory `/home/tc/via-xserver-86a-50283_src/XServer/src'
/bin/sh ../libtool --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I. -I..    -O2 -I/usr/local/include/xorg -I/usr/local/include/pixman-1 -I/usr/local/include   -DXFree86LOADER -I/usr/local/include -I/usr/local/include/drm -I/usr/local/include/X11/dri   -I/usr/include/X11  -I/usr/include/X11/extensions -I.. -I.  -O2 -MT via_common.lo -MD -MP -MF .deps/via_common.Tpo -c -o via_common.lo via_common.c
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I.. -O2 -I/usr/local/include/xorg -I/usr/local/include/pixman-1 -I/usr/local/include -DXFree86LOADER -I/usr/local/include -I/usr/local/include/drm -I/usr/local/include/X11/dri -I/usr/include/X11 -I/usr/include/X11/extensions -I.. -I. -O2 -MT via_common.lo -MD -MP -MF .deps/via_common.Tpo -c via_common.c  -fPIC -DPIC -o .libs/via_common.o

In file included from via_driver.h:66:0,
                 from via_common.h:29,
                 from via_common.c:32:
via_bios.h:32:45: fatal error: panoramiXproto.h: No such file or directory
compilation terminated.
make[2]: *** [via_common.lo] Error 1
make[2]: Leaving directory `/home/tc/via-xserver-86a-50283_src/XServer/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/tc/via-xserver-86a-50283_src/XServer'
make: *** [all] Error 2
tc@box:~/via-xserver-86a-50283_src/XServer$


tc@box:~/via-xserver-86a-50283_src/XServer$ sudo find / -name panoramiXproto.h
/tmp/tcloop/Xorg-7.4-dev/usr/local/include/X11/extensions/panoramiXproto.h
/usr/local/include/X11/extensions/panoramiXproto.h
tc@box:~/via-xserver-86a-50283_src/XServer$
Logged
"Software gets slower faster than hardware gets faster." Niklaus Wirth - A Plea for Lean Software (1995)

Offline jqcore

  • Newbie
  • *
  • Posts: 22
Re: WYSE V50LE dual screen setup
« Reply #16 on: April 13, 2013, 01:35:36 PM »
Line 32 in via_bios.h

Code: [Select]
#include "panoramiXproto.h"     /* required */
Logged

Offline Rich

  • Administrator
  • Hero Member
  • *****
  • Posts: 11618
Re: WYSE V50LE dual screen setup
« Reply #17 on: April 13, 2013, 01:38:11 PM »
Hi jqcore
Looks like tinypoodle found the problem.
Code: [Select]
-I/usr/include/X11/extensionsshould be:
Code: [Select]
-I/usr/local/include/X11/extensions
@tinypoodle: It took me a couple of minutes to spot what you were pointing out. Maybe use red instead of bold next time?
Logged

Offline tinypoodle

  • Hero Member
  • *****
  • Posts: 3857
Re: WYSE V50LE dual screen setup
« Reply #18 on: April 13, 2013, 01:59:55 PM »
Believe it or not, red was what I tried first of all, somehow didn't want to work, so I ended up with bold which easily worked ;)
Logged
"Software gets slower faster than hardware gets faster." Niklaus Wirth - A Plea for Lean Software (1995)

Offline jqcore

  • Newbie
  • *
  • Posts: 22
Re: WYSE V50LE dual screen setup
« Reply #19 on: April 13, 2013, 02:02:47 PM »
How should I proceed, newbie here!  ;D
Logged

Offline Rich

  • Administrator
  • Hero Member
  • *****
  • Posts: 11618
Re: WYSE V50LE dual screen setup
« Reply #20 on: April 13, 2013, 02:20:15 PM »
Hi jqcore
This might work:
Code: [Select]
export CFLAGS="-I/usr/local/include/X11/extensions"
export CXXFLAGS="-I/usr/local/include/X11/extensions"
make  all-recursivethough that's probably not the right way to solve it.
Logged

Offline tinypoodle

  • Hero Member
  • *****
  • Posts: 3857
Re: WYSE V50LE dual screen setup
« Reply #21 on: April 13, 2013, 02:29:18 PM »
Symlinking might work, but depends on what - if any - is already there under /usr/include.
Logged
"Software gets slower faster than hardware gets faster." Niklaus Wirth - A Plea for Lean Software (1995)

Offline Rich

  • Administrator
  • Hero Member
  • *****
  • Posts: 11618
Re: WYSE V50LE dual screen setup
« Reply #22 on: April 13, 2013, 02:33:29 PM »
Hi tinypoodle
/usr/include  already has an  extensions  subdirectory  as part of  Xorg-7.4-dev.

Logged

Offline jqcore

  • Newbie
  • *
  • Posts: 22
Re: WYSE V50LE dual screen setup
« Reply #23 on: April 13, 2013, 02:36:43 PM »
I tried Rich suggestion and got the same output as last time..
Logged

Offline tinypoodle

  • Hero Member
  • *****
  • Posts: 3857
Re: WYSE V50LE dual screen setup
« Reply #24 on: April 13, 2013, 02:42:47 PM »
Quote from: Rich on April 13, 2013, 02:33:29 PM
Hi tinypoodle
/usr/include  already has an  extensions  subdirectory  as part of  Xorg-7.4-dev.

What I feared...
Then it would come down to symlinking single files not already there...
Logged
"Software gets slower faster than hardware gets faster." Niklaus Wirth - A Plea for Lean Software (1995)

Offline Rich

  • Administrator
  • Hero Member
  • *****
  • Posts: 11618
Re: WYSE V50LE dual screen setup
« Reply #25 on: April 13, 2013, 02:46:05 PM »
Hi jqcore
Maybe the linker needs it too:
Code: [Select]
export CFLAGS="-I/usr/local/include/X11/extensions"
export CXXFLAGS="-I/usr/local/include/X11/extensions"
export LDFLAGS="-I/usr/local/include/X11/extensions"
make  all-recursive If that doesn't work, you could try a brute force approach:
Code: [Select]
sudo cp /usr/local/include/X11/extensions/* /usr/include/X11/extensionsor wait for someone more experienced to provide a proper answer.
Logged

Offline jqcore

  • Newbie
  • *
  • Posts: 22
Re: WYSE V50LE dual screen setup
« Reply #26 on: April 13, 2013, 02:48:23 PM »
I did a symlink and got pass that error.

here's a new one, does it look like its good to go?

Code: [Select]
tc@box:~/via-xserver-86a-50283_src/XServer$ make
make  all-recursive
make[1]: Entering directory `/home/tc/via-xserver-86a-50283_src/XServer'
Making all in src
make[2]: Entering directory `/home/tc/via-xserver-86a-50283_src/XServer/src'
/bin/sh ../libtool --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I. -I..    -O2 -I/usr/local/include/xorg -I/usr/local/include/pixman-1 -I/usr/local/include   -DXFree86LOADER -I/usr/local/include -I/usr/local/include/drm -I/usr/local/include/X11/dri   -I/usr/include/X11  -I/usr/include/X11/extensions -I.. -I.  -O2 -MT via_common.lo -MD -MP -MF .deps/via_common.Tpo -c -o via_common.lo via_common.c
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I.. -O2 -I/usr/local/include/xorg -I/usr/local/include/pixman-1 -I/usr/local/include -DXFree86LOADER -I/usr/local/include -I/usr/local/include/drm -I/usr/local/include/X11/dri -I/usr/include/X11 -I/usr/include/X11/extensions -I.. -I. -O2 -MT via_common.lo -MD -MP -MF .deps/via_common.Tpo -c via_common.c  -fPIC -DPIC -o .libs/via_common.o
In file included from via_driver.h:90:0,
                 from via_common.h:29,
                 from via_common.c:32:
via_3d.h:380:18: error: duplicate member 'bpp'
In file included from via_driver.h:92:0,
                 from via_common.h:29,
                 from via_common.c:32:
via_swov.h:346:23: error: duplicate member 'singleview'
via_swov.h:349:23: error: duplicate member 'reserverd'
make[2]: *** [via_common.lo] Error 1
make[2]: Leaving directory `/home/tc/via-xserver-86a-50283_src/XServer/src'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/tc/via-xserver-86a-50283_src/XServer'
make: *** [all] Error 2
tc@box:~/via-xserver-86a-50283_src/XServer$
Logged

Offline Rich

  • Administrator
  • Hero Member
  • *****
  • Posts: 11618
Re: WYSE V50LE dual screen setup
« Reply #27 on: April 13, 2013, 03:14:03 PM »
Hi jqcore
No, you still have problems. Maybe someone like AmatCoder will see this thread and know what to do. You could
send him a PM with a link to this thread and ask if he can help.
Logged

Offline jqcore

  • Newbie
  • *
  • Posts: 22
Re: WYSE V50LE dual screen setup
« Reply #28 on: April 13, 2013, 03:25:22 PM »
I was able to get it going, now how do I load the driver, (insmod, modprobe)

I just had to symlynk 4 more files and edited the 3 below files, it is a duplicate entry.

via_3d.h:380:18: error: duplicate member 'bpp'
via_swov.h:346:23: error: duplicate member 'singleview'
via_swov.h:349:23: error: duplicate member 'reserverd

As you can see the make and make install finished.

Code: [Select]
tc@box:~/via-xserver-86a-50283_src/XServer$ make
make  all-recursive
make[1]: Entering directory `/home/tc/via-xserver-86a-50283_src/XServer'
Making all in src
make[2]: Entering directory `/home/tc/via-xserver-86a-50283_src/XServer/src'
/bin/sh ../libtool --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I. -I..    -O2 -I/usr/local/include/xorg -I/usr/local/include/pixman-1 -I/usr/local/include   -DXFree86LOADER -I/usr/local/include -I/usr/local/include/drm -I/usr/local/include/X11/dri   -I/usr/include/X11  -I/usr/include/X11/extensions -I.. -I.  -O2 -MT via_swov.lo -MD -MP -MF .deps/via_swov.Tpo -c -o via_swov.lo via_swov.c
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I.. -O2 -I/usr/local/include/xorg -I/usr/local/include/pixman-1 -I/usr/local/include -DXFree86LOADER -I/usr/local/include -I/usr/local/include/drm -I/usr/local/include/X11/dri -I/usr/include/X11 -I/usr/include/X11/extensions -I.. -I. -O2 -MT via_swov.lo -MD -MP -MF .deps/via_swov.Tpo -c via_swov.c  -fPIC -DPIC -o .libs/via_swov.o
mv -f .deps/via_swov.Tpo .deps/via_swov.Plo
/bin/sh ../libtool --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I. -I..    -O2 -I/usr/local/include/xorg -I/usr/local/include/pixman-1 -I/usr/local/include   -DXFree86LOADER -I/usr/local/include -I/usr/local/include/drm -I/usr/local/include/X11/dri   -I/usr/include/X11  -I/usr/include/X11/extensions -I.. -I.  -O2 -MT via_eng_fops.lo -MD -MP -MF .deps/via_eng_fops.Tpo -c -o via_eng_fops.lo via_eng_fops.c
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I.. -O2 -I/usr/local/include/xorg -I/usr/local/include/pixman-1 -I/usr/local/include -DXFree86LOADER -I/usr/local/include -I/usr/local/include/drm -I/usr/local/include/X11/dri -I/usr/include/X11 -I/usr/include/X11/extensions -I.. -I. -O2 -MT via_eng_fops.lo -MD -MP -MF .deps/via_eng_fops.Tpo -c via_eng_fops.c  -fPIC -DPIC -o .libs/via_eng_fops.o
mv -f .deps/via_eng_fops.Tpo .deps/via_eng_fops.Plo
/bin/sh ../libtool --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I. -I..    -O2 -I/usr/local/include/xorg -I/usr/local/include/pixman-1 -I/usr/local/include   -DXFree86LOADER -I/usr/local/include -I/usr/local/include/drm -I/usr/local/include/X11/dri   -I/usr/include/X11  -I/usr/include/X11/extensions -I.. -I.  -O2 -MT via_eng_fops_cme.lo -MD -MP -MF .deps/via_eng_fops_cme.Tpo -c -o via_eng_fops_cme.lo via_eng_fops_cme.c
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I.. -O2 -I/usr/local/include/xorg -I/usr/local/include/pixman-1 -I/usr/local/include -DXFree86LOADER -I/usr/local/include -I/usr/local/include/drm -I/usr/local/include/X11/dri -I/usr/include/X11 -I/usr/include/X11/extensions -I.. -I. -O2 -MT via_eng_fops_cme.lo -MD -MP -MF .deps/via_eng_fops_cme.Tpo -c via_eng_fops_cme.c  -fPIC -DPIC -o .libs/via_eng_fops_cme.o
mv -f .deps/via_eng_fops_cme.Tpo .deps/via_eng_fops_cme.Plo
/bin/sh ../libtool --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I. -I..    -O2 -I/usr/local/include/xorg -I/usr/local/include/pixman-1 -I/usr/local/include   -DXFree86LOADER -I/usr/local/include -I/usr/local/include/drm -I/usr/local/include/X11/dri   -I/usr/include/X11  -I/usr/include/X11/extensions -I.. -I.  -O2 -MT via_eng_fops_cle.lo -MD -MP -MF .deps/via_eng_fops_cle.Tpo -c -o via_eng_fops_cle.lo via_eng_fops_cle.c
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I.. -O2 -I/usr/local/include/xorg -I/usr/local/include/pixman-1 -I/usr/local/include -DXFree86LOADER -I/usr/local/include -I/usr/local/include/drm -I/usr/local/include/X11/dri -I/usr/include/X11 -I/usr/include/X11/extensions -I.. -I. -O2 -MT via_eng_fops_cle.lo -MD -MP -MF .deps/via_eng_fops_cle.Tpo -c via_eng_fops_cle.c  -fPIC -DPIC -o .libs/via_eng_fops_cle.o
mv -f .deps/via_eng_fops_cle.Tpo .deps/via_eng_fops_cle.Plo
/bin/sh ../libtool --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I. -I..    -O2 -I/usr/local/include/xorg -I/usr/local/include/pixman-1 -I/usr/local/include   -DXFree86LOADER -I/usr/local/include -I/usr/local/include/drm -I/usr/local/include/X11/dri   -I/usr/include/X11  -I/usr/include/X11/extensions -I.. -I.  -O2 -MT via_eng_reg_fops.lo -MD -MP -MF .deps/via_eng_reg_fops.Tpo -c -o via_eng_reg_fops.lo via_eng_reg_fops.c
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I.. -O2 -I/usr/local/include/xorg -I/usr/local/include/pixman-1 -I/usr/local/include -DXFree86LOADER -I/usr/local/include -I/usr/local/include/drm -I/usr/local/include/X11/dri -I/usr/include/X11 -I/usr/include/X11/extensions -I.. -I. -O2 -MT via_eng_reg_fops.lo -MD -MP -MF .deps/via_eng_reg_fops.Tpo -c via_eng_reg_fops.c  -fPIC -DPIC -o .libs/via_eng_reg_fops.o
mv -f .deps/via_eng_reg_fops.Tpo .deps/via_eng_reg_fops.Plo
/bin/sh ../libtool --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I. -I..    -O2 -I/usr/local/include/xorg -I/usr/local/include/pixman-1 -I/usr/local/include   -DXFree86LOADER -I/usr/local/include -I/usr/local/include/drm -I/usr/local/include/X11/dri   -I/usr/include/X11  -I/usr/include/X11/extensions -I.. -I.  -O2 -MT via_memmgr.lo -MD -MP -MF .deps/via_memmgr.Tpo -c -o via_memmgr.lo via_memmgr.c
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I.. -O2 -I/usr/local/include/xorg -I/usr/local/include/pixman-1 -I/usr/local/include -DXFree86LOADER -I/usr/local/include -I/usr/local/include/drm -I/usr/local/include/X11/dri -I/usr/include/X11 -I/usr/include/X11/extensions -I.. -I. -O2 -MT via_memmgr.lo -MD -MP -MF .deps/via_memmgr.Tpo -c via_memmgr.c  -fPIC -DPIC -o .libs/via_memmgr.o
mv -f .deps/via_memmgr.Tpo .deps/via_memmgr.Plo
/bin/sh ../libtool --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I. -I..    -O2 -I/usr/local/include/xorg -I/usr/local/include/pixman-1 -I/usr/local/include   -DXFree86LOADER -I/usr/local/include -I/usr/local/include/drm -I/usr/local/include/X11/dri   -I/usr/include/X11  -I/usr/include/X11/extensions -I.. -I.  -O2 -MT via_vt1636.lo -MD -MP -MF .deps/via_vt1636.Tpo -c -o via_vt1636.lo via_vt1636.c
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I.. -O2 -I/usr/local/include/xorg -I/usr/local/include/pixman-1 -I/usr/local/include -DXFree86LOADER -I/usr/local/include -I/usr/local/include/drm -I/usr/local/include/X11/dri -I/usr/include/X11 -I/usr/include/X11/extensions -I.. -I. -O2 -MT via_vt1636.lo -MD -MP -MF .deps/via_vt1636.Tpo -c via_vt1636.c  -fPIC -DPIC -o .libs/via_vt1636.o
mv -f .deps/via_vt1636.Tpo .deps/via_vt1636.Plo
/bin/sh ../libtool --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I. -I..    -O2 -I/usr/local/include/xorg -I/usr/local/include/pixman-1 -I/usr/local/include   -DXFree86LOADER -I/usr/local/include -I/usr/local/include/drm -I/usr/local/include/X11/dri   -I/usr/include/X11  -I/usr/include/X11/extensions -I.. -I.  -O2 -MT via_rotate.lo -MD -MP -MF .deps/via_rotate.Tpo -c -o via_rotate.lo via_rotate.c
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I.. -O2 -I/usr/local/include/xorg -I/usr/local/include/pixman-1 -I/usr/local/include -DXFree86LOADER -I/usr/local/include -I/usr/local/include/drm -I/usr/local/include/X11/dri -I/usr/include/X11 -I/usr/include/X11/extensions -I.. -I. -O2 -MT via_rotate.lo -MD -MP -MF .deps/via_rotate.Tpo -c via_rotate.c  -fPIC -DPIC -o .libs/via_rotate.o
mv -f .deps/via_rotate.Tpo .deps/via_rotate.Plo
/bin/sh ../libtool --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I. -I..    -O2 -I/usr/local/include/xorg -I/usr/local/include/pixman-1 -I/usr/local/include   -DXFree86LOADER -I/usr/local/include -I/usr/local/include/drm -I/usr/local/include/X11/dri   -I/usr/include/X11  -I/usr/include/X11/extensions -I.. -I.  -O2 -MT video_rotate.lo -MD -MP -MF .deps/video_rotate.Tpo -c -o video_rotate.lo video_rotate.c
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I.. -O2 -I/usr/local/include/xorg -I/usr/local/include/pixman-1 -I/usr/local/include -DXFree86LOADER -I/usr/local/include -I/usr/local/include/drm -I/usr/local/include/X11/dri -I/usr/include/X11 -I/usr/include/X11/extensions -I.. -I. -O2 -MT video_rotate.lo -MD -MP -MF .deps/video_rotate.Tpo -c video_rotate.c  -fPIC -DPIC -o .libs/video_rotate.o
mv -f .deps/video_rotate.Tpo .deps/video_rotate.Plo
/bin/sh ../libtool --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I. -I..    -O2 -I/usr/local/include/xorg -I/usr/local/include/pixman-1 -I/usr/local/include   -DXFree86LOADER -I/usr/local/include -I/usr/local/include/drm -I/usr/local/include/X11/dri   -I/usr/include/X11  -I/usr/include/X11/extensions -I.. -I.  -O2 -MT via_texvideo.lo -MD -MP -MF .deps/via_texvideo.Tpo -c -o via_texvideo.lo via_texvideo.c
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I.. -O2 -I/usr/local/include/xorg -I/usr/local/include/pixman-1 -I/usr/local/include -DXFree86LOADER -I/usr/local/include -I/usr/local/include/drm -I/usr/local/include/X11/dri -I/usr/include/X11 -I/usr/include/X11/extensions -I.. -I. -O2 -MT via_texvideo.lo -MD -MP -MF .deps/via_texvideo.Tpo -c via_texvideo.c  -fPIC -DPIC -o .libs/via_texvideo.o
mv -f .deps/via_texvideo.Tpo .deps/via_texvideo.Plo
/bin/sh ../libtool --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I. -I..    -O2 -I/usr/local/include/xorg -I/usr/local/include/pixman-1 -I/usr/local/include   -DXFree86LOADER -I/usr/local/include -I/usr/local/include/drm -I/usr/local/include/X11/dri   -I/usr/include/X11  -I/usr/include/X11/extensions -I.. -I.  -O2 -MT via_Hw3DScaling.lo -MD -MP -MF .deps/via_Hw3DScaling.Tpo -c -o via_Hw3DScaling.lo via_Hw3DScaling.c
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I.. -O2 -I/usr/local/include/xorg -I/usr/local/include/pixman-1 -I/usr/local/include -DXFree86LOADER -I/usr/local/include -I/usr/local/include/drm -I/usr/local/include/X11/dri -I/usr/include/X11 -I/usr/include/X11/extensions -I.. -I. -O2 -MT via_Hw3DScaling.lo -MD -MP -MF .deps/via_Hw3DScaling.Tpo -c via_Hw3DScaling.c  -fPIC -DPIC -o .libs/via_Hw3DScaling.o
mv -f .deps/via_Hw3DScaling.Tpo .deps/via_Hw3DScaling.Plo
/bin/sh ../libtool --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I. -I..    -O2 -I/usr/local/include/xorg -I/usr/local/include/pixman-1 -I/usr/local/include   -DXFree86LOADER -I/usr/local/include -I/usr/local/include/drm -I/usr/local/include/X11/dri   -I/usr/include/X11  -I/usr/include/X11/extensions -I.. -I.  -O2 -MT agpctl.lo -MD -MP -MF .deps/agpctl.Tpo -c -o agpctl.lo agpctl.c
libtool: compile:  gcc -DHAVE_CONFIG_H -I. -I.. -O2 -I/usr/local/include/xorg -I/usr/local/include/pixman-1 -I/usr/local/include -DXFree86LOADER -I/usr/local/include -I/usr/local/include/drm -I/usr/local/include/X11/dri -I/usr/include/X11 -I/usr/include/X11/extensions -I.. -I. -O2 -MT agpctl.lo -MD -MP -MF .deps/agpctl.Tpo -c agpctl.c  -fPIC -DPIC -o .libs/agpctl.o
mv -f .deps/agpctl.Tpo .deps/agpctl.Plo
/bin/sh ../libtool --tag=CC   --mode=link gcc -O2 -I/usr/local/include/xorg -I/usr/local/include/pixman-1 -I/usr/local/include   -DXFree86LOADER -I/usr/local/include -I/usr/local/include/drm -I/usr/local/include/X11/dri   -I/usr/include/X11  -I/usr/include/X11/extensions -I.. -I.  -O2 -module -avoid-version  -o via_drv.la -rpath /usr/lib/xorg/modules/drivers via_common.lo via_serial.lo via_displcd.lo hw.lo via_accel.lo via_xaa.lo via_exa.lo via_exa_h5.lo via_exa_h6.lo via_3d.lo via_bandwidth.lo via_bios.lo via_cursor.lo via_output.lo via_display.lo via_dga.lo via_dri.lo via_driver.lo via_dvi.lo via_gpioi2c.lo via_i2c.lo via_lcd.lo via_mergedfb.lo via_shadow.lo via_utility.lo via_video.lo xf86drmVIA.lo via_dmabuffer.lo via_swov.lo via_eng_fops.lo via_eng_fops_cme.lo via_eng_fops_cle.lo via_eng_reg_fops.lo via_memmgr.lo via_vt1636.lo via_rotate.lo video_rotate.lo via_texvideo.lo via_Hw3DScaling.lo agpctl.lo
libtool: link: gcc -shared  -fPIC -DPIC  .libs/via_common.o .libs/via_serial.o .libs/via_displcd.o .libs/hw.o .libs/via_accel.o .libs/via_xaa.o .libs/via_exa.o .libs/via_exa_h5.o .libs/via_exa_h6.o .libs/via_3d.o .libs/via_bandwidth.o .libs/via_bios.o .libs/via_cursor.o .libs/via_output.o .libs/via_display.o .libs/via_dga.o .libs/via_dri.o .libs/via_driver.o .libs/via_dvi.o .libs/via_gpioi2c.o .libs/via_i2c.o .libs/via_lcd.o .libs/via_mergedfb.o .libs/via_shadow.o .libs/via_utility.o .libs/via_video.o .libs/xf86drmVIA.o .libs/via_dmabuffer.o .libs/via_swov.o .libs/via_eng_fops.o .libs/via_eng_fops_cme.o .libs/via_eng_fops_cle.o .libs/via_eng_reg_fops.o .libs/via_memmgr.o .libs/via_vt1636.o .libs/via_rotate.o .libs/video_rotate.o .libs/via_texvideo.o .libs/via_Hw3DScaling.o .libs/agpctl.o    -O2 -O2   -Wl,-soname -Wl,via_drv.so -o .libs/via_drv.so
libtool: link: ( cd ".libs" && rm -f "via_drv.la" && ln -s "../via_drv.la" "via_drv.la" )
make[2]: Leaving directory `/home/tc/via-xserver-86a-50283_src/XServer/src'
make[2]: Entering directory `/home/tc/via-xserver-86a-50283_src/XServer'
make[2]: Nothing to be done for `all-am'.
make[2]: Leaving directory `/home/tc/via-xserver-86a-50283_src/XServer'
make[1]: Leaving directory `/home/tc/via-xserver-86a-50283_src/XServer'
tc@box:~/via-xserver-86a-50283_src/XServer$ sudo make install
Making install in src
make[1]: Entering directory `/home/tc/via-xserver-86a-50283_src/XServer/src'
make[2]: Entering directory `/home/tc/via-xserver-86a-50283_src/XServer/src'
make[2]: Nothing to be done for `install-exec-am'.
test -z "/usr/lib/xorg/modules/drivers" || /usr/local/bin/mkdir -p "/usr/lib/xorg/modules/drivers"
 /bin/sh ../libtool   --mode=install /usr/local/bin/install -c   via_drv.la '/usr/lib/xorg/modules/drivers'
libtool: install: /usr/local/bin/install -c .libs/via_drv.so /usr/lib/xorg/modules/drivers/via_drv.so
libtool: install: /usr/local/bin/install -c .libs/via_drv.lai /usr/lib/xorg/modules/drivers/via_drv.la
libtool: finish: PATH="/home/tc/.local/bin:/usr/local/sbin:/usr/local/bin:/apps/bin:/usr/sbin:/usr/bin:/sbin:/bin:/etc/sysconfig/tcedir/ondemand:/sbin" ldconfig -n /usr/lib/xorg/modules/drivers
----------------------------------------------------------------------
Libraries have been installed in:
   /usr/lib/xorg/modules/drivers

If you ever happen to want to link against installed libraries
in a given directory, LIBDIR, you must either use libtool, and
specify the full pathname of the library, or use the `-LLIBDIR'
flag during linking and do at least one of the following:
   - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
     during execution
   - add LIBDIR to the `LD_RUN_PATH' environment variable
     during linking
   - use the `-Wl,-rpath -Wl,LIBDIR' linker flag
   - have your system administrator add LIBDIR to `/etc/ld.so.conf'

See any operating system documentation about shared libraries for
more information, such as the ld(1) and ld.so(8) manual pages.
----------------------------------------------------------------------
make[2]: Leaving directory `/home/tc/via-xserver-86a-50283_src/XServer/src'
make[1]: Leaving directory `/home/tc/via-xserver-86a-50283_src/XServer/src'
make[1]: Entering directory `/home/tc/via-xserver-86a-50283_src/XServer'
make[2]: Entering directory `/home/tc/via-xserver-86a-50283_src/XServer'
make[2]: Nothing to be done for `install-exec-am'.
make[2]: Nothing to be done for `install-data-am'.
make[2]: Leaving directory `/home/tc/via-xserver-86a-50283_src/XServer'
make[1]: Leaving directory `/home/tc/via-xserver-86a-50283_src/XServer'
tc@box:~/via-xserver-86a-50283_src/XServer$
Logged

Offline tinypoodle

  • Hero Member
  • *****
  • Posts: 3857
Re: WYSE V50LE dual screen setup
« Reply #29 on: April 13, 2013, 03:36:51 PM »
Quote from: jqcore on April 13, 2013, 03:25:22 PM
I was able to get it going, now how do I load the driver, (insmod, modprobe)

See Reply #1

Specifying driver in your xorg.conf might work.
Logged
"Software gets slower faster than hardware gets faster." Niklaus Wirth - A Plea for Lean Software (1995)
Pages: 1 [2] 3 4   Go Up
« previous next »