WelcomeWelcome | FAQFAQ | DownloadsDownloads | WikiWiki

Author Topic: RE: Basic Linphone Configuration in tc 4.2  (Read 3054 times)

Offline newtotinycore

  • Newbie
  • *
  • Posts: 37
RE: Basic Linphone Configuration in tc 4.2
« on: June 18, 2012, 04:29:17 PM »
Hi,   
Anybody got time to share Linphone 3.5.2 settings for tc 4.2 using Diamondcard?
I've tried to follow the diamondcard website instructions for Linphone 3.3.2, but no luck.
If another voip operator works better, please recomend.
After setup, my address at screen bottom is= sip:<my login ID> @sip.diamond.us ( arrows mine)
This is very different than BJ Markus settings in forums = <sip:tc@192.168.2.1237> (arrows on screen).
My interest is calling land lines, so I need a voip operator? Right?

Offline newtotinycore

  • Newbie
  • *
  • Posts: 37
Re: RE: Basic Linphone Configuration in tc 4.2
« Reply #1 on: June 18, 2012, 08:58:02 PM »
 :) Thanks for moving the post, Rich. Apologies for my carelessness.

To clarify my post:
Interested in using Linphone (in tc 4.3) or alternative to call land lines.
I've tried using DiamondCard as a SIP voip provider, but cannot get the combo working.

 Can anybody recomend a SIP VOIP operator to make the connection between Linphone and land lines?
Is this practical in tinycore?

Thanks,
Newtotinycore

Offline Rich

  • Administrator
  • Hero Member
  • *****
  • Posts: 11518
Re: RE: Basic Linphone Configuration in tc 4.2
« Reply #2 on: June 18, 2012, 09:12:29 PM »
Hi newtotinycore
Quote
my address at screen bottom is= sip:<my login ID> @sip.diamond.us
According to  http://www.linphone.org/eng/documentation/guide/
Quote
In a first step, the user has to subscribe for the service by choosing a username (sometimes a number) and password. Your public sip identity is then sip:<your username>@<your voip provider>, this is the address that other people can use to reach you using SIP.
So that part looks right.

Offline newtotinycore

  • Newbie
  • *
  • Posts: 37
Re: RE: Basic Linphone Configuration in tc 4.3
« Reply #3 on: June 18, 2012, 09:22:04 PM »
 :) Thanks again, Rich.

Configuration with Callcentric, is straightforward.
But after configuration, I never get to the pop-up window (for password).

Anybody using Linphone in tc 4.3 for calls to land lines?
Maybe it's not feasible.



Offline tinypoodle

  • Hero Member
  • *****
  • Posts: 3857
Re: RE: Basic Linphone Configuration in tc 4.2
« Reply #4 on: June 19, 2012, 07:01:06 PM »
FWIW, a SIP account from ekiga.net works with pjsua.tcz for me under core.
"Software gets slower faster than hardware gets faster." Niklaus Wirth - A Plea for Lean Software (1995)

Offline newtotinycore

  • Newbie
  • *
  • Posts: 37
Re: RE: Basic Linphone Configuration in tc 4.2
« Reply #5 on: June 21, 2012, 10:12:04 PM »
 :) Thanks for the tip!
I'll check it out.