Off-Topic > SCM EXtensions

xsane.scm missing wbar icon

(1/2) > >>

uggla:
xsane.scm has no wbar icon while xsane.tcz has.

Jason W:
There must be  typo in the .desktop file or similar, I will look at it tonight.

Onyarian:
I'm testing the extension and I find two problems:

1- There is an apps/xsane/pkgbase/local/lib/modules/3.0.3-tinycore and not /modules/3.0.21-tinycore

2- I have a multifuncion Samsung scx-4200 with dmesg:

--- Quote ---usb 1-1: new high speed USB device number 5 using ehci_hcd
usblp0: USB Bidirectional printer dev 5 if 1 alt 0 proto 2 vid 0x04E8 pid 0x341B

--- End quote ---
but xsane says "no devices aviable" after scanning for devices.
I know it uses the xerox_mfp driver
there is an /apps/xsane/pkgbase/local/etc/sane.d/xerox_mfp.conf with:

--- Quote ---#xerox_mfp.conf

#Xerox Phaser 3200MFP
usb 0x0924 0x3da4

#Dell MFP Laser Printer 1815dn
usb 0x413c 0x5124

#Xerox Phaser 6110MFP
usb 0x0924 0x3d5d

#Samsung CLX-3170fn & CLX-3175FW
usb 0x04e8 0x342a

#Samsung SCX-4200
usb 0x04e8 0x341b


--- End quote ---
and a /apps/xsane/pkgbase/local/lib/sane/libsane-xerox_mfp.so (so.1 and so.1.0.22)

where is the problem?
Is something that I can do to be the multifuncion be detected as a scanner?

edit:
the result of:

--- Quote ---tc@box:/apps/xsane/pkgbase$ sane-find-scanner

  # sane-find-scanner will now attempt to detect your scanner. If the
  # result is different from what you expected, first make sure your
  # scanner is powered up and properly connected to your computer.

  # No SCSI scanners found. If you expected something different, make sure that
  # you have loaded a kernel SCSI driver for your SCSI adapter.

found USB scanner (vendor=0x04e8 [Samsung], product=0x341b [SCX-4200 Series]) at libusb:001:004
  # Your USB scanner was (probably) detected. It may or may not be supported by
  # SANE. Try scanimage -L and read the backend's manpage.
...

--- End quote ---
and

--- Quote ---tc@box:/apps/xsane/pkgbase$ scanimage -L

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).


--- End quote ---

edit 2:
perhaps is because I don't have the scanner module in lsmod. How to get it?

Jason W:
As of present there is no support for kernel modules in scms, so I will remove the superfluous directory.

I will fix the desktop icon issue also.

As I only have one scanner to test with, and it works, I am not sure what is going on with yours.  But I will poke around and see what issues there may be preventing the scanner from being found.

Jason W:
I see at least one issue I overlooked, I will aim to fix it today.

Navigation

[0] Message Index

[#] Next page