WelcomeWelcome | FAQFAQ | DownloadsDownloads | WikiWiki

Author Topic: Core v4.4rc2  (Read 23251 times)

Offline roberts

  • Retired Admins
  • Hero Member
  • *****
  • Posts: 7361
  • Founder Emeritus
Core v4.4rc2
« on: March 01, 2012, 10:46:00 PM »
The second release candidate of Core 4.4 is ready for public testing:
http://distro.ibiblio.org/pub/linux/distributions/tinycorelinux/4.x/x86/release_candidates

The major theme for Core v4.4 is a kernel & modules update and tag searching.

Changelog for 4.4rc1:

* Minor kernel update to 3.0.21 to support the following:
** ax25 / ham radio support
** kexec
** efficeon agp patch
** r6040 mii fix
** isa libata enabled for very old laptops
** xts, gf128mul for truecrypt uses
** resolves the kernel panic issue when mounting CIFS shares.
* Updated tc-config with syslog/rsyslog patch
* Updated Xprogs.tcz: scmbrowser and smc-fetch.sh tweaks

Update instructions, from the release candidate area:
1. Copy over new vmlinuz
2. Copy over new core.gz
3. Copy over new Xprogs.tcz
4. boot into new system

if You have/use X then
AppsAduit -> Dependencies -> Build Reporting Database -> Fetch Missing

or if you only use Core (no X) or Xorg did not start and only have a system prompt use:
tce-audit builddb
tce-audit fetchmissing

=====================
Change log for 4.4rc2

* Updated search.sh added -t option for tag search.
* Updated provides.sh for CLI use.
* Updated appbrowser for new tag search.
* Updated ab keyword is now a tag search.
* Updated tce-size with date check on sizefile update.
* Updated tce-setup fixed when base boot code is used with missing /tmp/tce/optional directory.
* Updated tce-setdrive with a required readlink.
* Updated filetool.sh with a required readlink when used after tce-setdrive.
* Recompressed modules to save space.
* Added ssb module to base.

Note: Xprogs.tcz has been updated and is in the release candidate area.
 
10+ Years Contributing to Linux Open Source Projects.

Offline netnomad

  • Hero Member
  • *****
  • Posts: 1026
Re: Core v4.4rc2
« Reply #1 on: March 02, 2012, 02:01:04 AM »
hi roberts,

thank you for adding ssb module to base.
but it's not loaded at the usual booting... i didn't blacklist this module as recommended lately.
ifconfig shows only the loop-device.
do i need additional bootcodes or  to load a further module-package?
i add my dmesg and my loaded modules to this thread.

thank you for your help.


Offline bmarkus

  • Administrator
  • Hero Member
  • *****
  • Posts: 7183
    • My Community Forum
Re: Core v4.4rc2
« Reply #2 on: March 02, 2012, 02:04:45 AM »
Quote
The Set button has only ever been active when the tcedir is on /tmp and the initial status bar displaying tcedir is red. No other purpose.

With AppBrowser / Local I can load extension from anywhere in the file system. It is convenient during testing extensions. With ScmBrowser I can't do that, I have to move it to the production directory /tce/optional and install from there and remove when testing finished.
Béla
Ham Radio callsign: HA5DI

"Amateur Radio: The First Technology-Based Social Network."

Offline Juanito

  • Administrator
  • Hero Member
  • *****
  • Posts: 14826
Re: Core v4.4rc2
« Reply #3 on: March 02, 2012, 03:12:43 AM »
I've just checked my machine and ssb loads on boot - I don't have hardware that requires b44 though...

Offline netnomad

  • Hero Member
  • *****
  • Posts: 1026
Re: Core v4.4rc2
« Reply #4 on: March 02, 2012, 05:57:59 AM »
hi juanito,

as you can see in my modules-list, there is no ssb-module:
acpi_cpufreq 12288 1 - Live 0xf8b04000
mperf 12288 1 acpi_cpufreq, Live 0xf8b00000
cpufreq_userspace 12288 0 - Live 0xf8afa000
cpufreq_powersave 12288 0 - Live 0xf8af6000
cpufreq_stats 12288 0 - Live 0xf88e5000
cpufreq_conservative 12288 0 - Live 0xf88e1000
squashfs 24576 43 - Live 0xf88e9000
scsi_wait_scan 12288 0 - Live 0xf884a000
zcache 12288 0 - Live 0xf883b000 (PC)
zram 12288 1 - Live 0xf8846000 (C)
loop 16384 86 - Live 0xf8841000
pcspkr 12288 0 - Live 0xf884e000
serio_raw 12288 0 - Live 0xf8837000
sdhci_pci 12288 0 - Live 0xf807c000
r592 16384 0 - Live 0xf8063000
sdhci 20480 1 sdhci_pci, Live 0xf8831000
memstick 12288 1 r592, Live 0xf8051000
mmc_core 45056 1 sdhci, Live 0xf8070000
yenta_socket 20480 0 - Live 0xf8033000
pcmcia 28672 0 - Live 0xf8068000
pcmcia_rsrc 16384 1 yenta_socket, Live 0xf8059000
pcmcia_core 16384 3 yenta_socket,pcmcia,pcmcia_rsrc, Live 0xf8042000
video 16384 0 - Live 0xf8048000
backlight 12288 1 video, Live 0xf803e000
battery 12288 0 - Live 0xf803a000
ac 12288 0 - Live 0xf802f000

all tc-versions since 3.0 supported this ethernetcard...

Offline Rich

  • Administrator
  • Hero Member
  • *****
  • Posts: 11659
Re: Core v4.4rc2
« Reply #5 on: March 02, 2012, 03:17:37 PM »
A little off topic, but is the kernel command line still limited to 256 characters? Netnomad has 286 in his.

Offline curaga

  • Administrator
  • Hero Member
  • *****
  • Posts: 11048
Re: Core v4.4rc2
« Reply #6 on: March 03, 2012, 03:13:50 AM »
I think it depends on the bootloader too.

edit: It's unlimited in the boot protocol v2.06. Grub 0.97 appears to support 2.03 for example.
« Last Edit: March 03, 2012, 03:20:52 AM by curaga »
The only barriers that can stop you are the ones you create yourself.

Offline philip

  • Full Member
  • ***
  • Posts: 125
Re: Core v4.4rc2
« Reply #7 on: March 04, 2012, 12:26:54 PM »
Not sure this is appropriate here, but it describes a scenario that sort of works in 4.4rc2 and failed with kernel panic in 4.3: http://forum.tinycorelinux.net/index.php/topic,12722.0.html

Offline uggla

  • Sr. Member
  • ****
  • Posts: 438
Re: Core v4.4rc2
« Reply #8 on: March 04, 2012, 01:14:34 PM »
I think I've found the reason for my Xprogs-wbar-acroread problem:

http://forum.tinycorelinux.net/index.php/topic,12339.msg69497.html#msg69497

Offline bmarkus

  • Administrator
  • Hero Member
  • *****
  • Posts: 7183
    • My Community Forum
Re: Core v4.4rc2
« Reply #9 on: March 05, 2012, 10:04:25 AM »
Search in AppBrowser doesn't work, returns the full extension list instead of only matching names.
Béla
Ham Radio callsign: HA5DI

"Amateur Radio: The First Technology-Based Social Network."

Offline bmarkus

  • Administrator
  • Hero Member
  • *****
  • Posts: 7183
    • My Community Forum
Re: Core v4.4rc2
« Reply #10 on: March 05, 2012, 10:15:21 AM »
In current version TC is composed of Core and few extensions. Running from USB stick CDE content is copied to TCE and handled on the same way as user installed extensions. Using the 'base' boot options no any extensions loaded, result is Core instead if TinyCore, therefore you can not start a clean TC system after installing extensions.

Use xbase.lst as a protection list and even when base option used load extensions from xbase.lst and skip all others.
Béla
Ham Radio callsign: HA5DI

"Amateur Radio: The First Technology-Based Social Network."

Offline roberts

  • Retired Admins
  • Hero Member
  • *****
  • Posts: 7361
  • Founder Emeritus
Re: Core v4.4rc2
« Reply #11 on: March 05, 2012, 11:05:39 AM »
Search in AppBrowser doesn't work, returns the full extension list instead of only matching names.
Working fine here. NMI
10+ Years Contributing to Linux Open Source Projects.

Offline mladen

  • Newbie
  • *
  • Posts: 9
Re: Core v4.4rc2
« Reply #12 on: March 06, 2012, 03:52:49 AM »
Use xbase.lst as a protection list and even when base option used load extensions from xbase.lst and skip all others.

After a base installation to usb, I copied  original /cde directory to it and try to play with "clean" CorePlus configuration.  Noticed that if I add some extension to the xbase.lst file and use  cde  and lst=xbase.lst  boot options,  system boot only tcz extensions from original unmodified version of xbase.lst file  !?

Offline roberts

  • Retired Admins
  • Hero Member
  • *****
  • Posts: 7361
  • Founder Emeritus
Re: Core v4.4rc2
« Reply #13 on: March 06, 2012, 04:26:53 PM »
On a usb install you should be using a normal live tce directory and not cde.

cde is intended for cdrom and isohybrid for delivery of read-only extensions due to the factoring out of X/GUI from the initrd strting with version 4.2
10+ Years Contributing to Linux Open Source Projects.

Offline mladen

  • Newbie
  • *
  • Posts: 9
Re: Core v4.4rc2
« Reply #14 on: March 07, 2012, 04:16:57 AM »
Thanks for your explanation Roberts.
Actually I used  /cde directory trying to  separate working directories for tcz and scm extensions.  I entered to the same problem as  bmarkus:
With AppBrowser / Local I can load extension from anywhere in the file system. It is convenient during testing extensions. With ScmBrowser I can't do that, I have to move it to the production directory /tce/optional and install from there and remove when testing finished.
so I experimented using separate directories (not named tce !)  for tcz and scm extensions.

Booting CorePlus from /cde directory and using two simple scripts I can easily change /etc/sysconfig/tcedir and  alternatively use this two directories for downloading and  experimenting with new extensions.  In this way I avoid bloating my production  /tce directory with things I really don`t need. Using such /cde based  configuration, I can also easily use the most recent release candidate without touching my stable usb installation.

I suppose this subject is better to discuss on other place, but I was initiated with quoted bmarkus comment.