Tiny Core Base > Release Candidate Testing

Core v4.2rc1

<< < (2/20) > >>

roberts:

--- Quote from: Juanito on December 10, 2011, 01:35:09 AM ---Perhaps it changed earlier and I missed it, but ~/.xsession looks to have changed too.

Also, on boot udhcpc runs as "/sbin/udhcpc -b -i eth0 -h host -p /var/run/udhcpc.eth0.pid", but using the panel applet, it runs as "udhcpc -H host -b -i eth0"

--- End quote ---
network GUI, typically accessibile from control panel, will have the -p option added in next cut.

.xsession has now added to the opening announcement post. Thanks!

glareboa:
A small error in the Сore-4.2r1.iso
Written in isolinux.cfg

append initrd = / boot / microcore.gz quiet

but should

append initrd = / boot / core.gz quiet

Rich:
Hi glareboa
Please use proper syntax when posting commands or parameters. There should be no spaces by
those slashes. Someone who is unaware of this may cut and paste what you have posted only to
find out it does not work.

roberts:

--- Quote from: glareboa on December 10, 2011, 11:35:33 AM ---A small error in the Сore-4.2r1.iso
Written in isolinux.cfg

append initrd = / boot / microcore.gz quiet

but should

append initrd = / boot / core.gz quiet

--- End quote ---

Thanks! Corrected and reposted Core-4.2rc1.iso

vinnie:

--- Quote from: Rich on December 10, 2011, 12:06:51 PM ---Hi glareboa
Please use proper syntax when posting commands or parameters. There should be no spaces by
those slashes. Someone who is unaware of this may cut and paste what you have posted only to
find out it does not work.

--- End quote ---

it is possible that he has used google translate.
  / this / is / a / test / translated / with / google / without / spaces / inserted

Navigation

[0] Message Index

[#] Next page

[*] Previous page