multicore 64 4.0.2, can't load module nvida...unknown symbol or parameter

[redwolf]

I'm trying to get Xorg configured on multicore64 with the proprietary nvidia driver.  However, when running Xorg -configure, I'm getting the following error:

modprobe: can't load module nvidia (kernel.tclocal/drivers/video/nvidia.ko.gz)
unknown symbol in module, or unknown parameter

(EE) NVIDIA: Failed to load the NVIDIA kernel module. Please check your
(EE) NVIDIA:         system's kernel log for additional error messages.
(EE) Failed to load module "nvidia" (module-specific error, 0)
(EE) Failed to load module "via" (no error, 0)
(EE) Failed to load module "openchrome" (no error, 0)

dmeg shows..

nvidia: Unknown symbol agp_bind_memory (err 0)
nvidia: Unknown symbol agp_enable (err 0)
nvidia: Unknown symbol agp_backend_acquire (err 0)
nvidia: Unknown symbol agp_bridges (err 0)
nvidia: Unknown symbol agp_free_memory (err 0)
nvidia: Unknown symbol agp_allocate_memory (err 0)
nvidia: Unknown symbol agp_unbind_memory (err 0)
nvidia: Unknown symbol agp_copy_info (err 0)
nvidia: Unknown symbol agp_backend_release (err 0)
e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
ioctl32(aterm:2053): Unknown cmd fd(5) cmd(00005302){t:'S';sz:0} arg(080606ae) on /dev/pts/0
ioctl32(aterm:2053): Unknown cmd fd(5) cmd(00005302){t:'S';sz:0} arg(080606b3) on /dev/pts/0
ioctl32(aterm:2053): Unknown cmd fd(5) cmd(00005302){t:'S';sz:0} arg(080606ba) on /dev/pts/0
nvidia: Unknown symbol agp_bind_memory (err 0)
nvidia: Unknown symbol agp_enable (err 0)
nvidia: Unknown symbol agp_backend_acquire (err 0)
nvidia: Unknown symbol agp_bridges (err 0)
nvidia: Unknown symbol agp_free_memory (err 0)
nvidia: Unknown symbol agp_allocate_memory (err 0)
nvidia: Unknown symbol agp_unbind_memory (err 0)
nvidia: Unknown symbol agp_copy_info (err 0)
nvidia: Unknown symbol agp_backend_release (err 0)
nvidia: Unknown symbol agp_bind_memory (err 0)
nvidia: Unknown symbol agp_enable (err 0)
nvidia: Unknown symbol agp_backend_acquire (err 0)
nvidia: Unknown symbol agp_bridges (err 0)
nvidia: Unknown symbol agp_free_memory (err 0)
nvidia: Unknown symbol agp_allocate_memory (err 0)
nvidia: Unknown symbol agp_unbind_memory (err 0)
nvidia: Unknown symbol agp_copy_info (err 0)
nvidia: Unknown symbol agp_backend_release (err 0)
ioctl32(aterm:2247): Unknown cmd fd(5) cmd(00005302){t:'S';sz:0} arg(080606ae) on /dev/pts/0
ioctl32(aterm:2247): Unknown cmd fd(5) cmd(00005302){t:'S';sz:0} arg(080606b3) on /dev/pts/0
ioctl32(aterm:2247): Unknown cmd fd(5) cmd(00005302){t:'S';sz:0} arg(080606ba) on /dev/pts/0

Anyone else seeing this?  Anyone have multicore64 4.0.2 working with the nvidia drivers?

I've attached a list of my extensions for reference.

[curaga]

Beyond loading the graphics- extension, it seems you need to modprobe agpgart for some reason.

[redwolf]

Thanks....that seems to have done the trick.  At least I end up with a working xorg.conf.new.  I do still see the following errors though, even if I modprobe via.  I received an error about a missing .dep when trying to modprobe openchrome.

(EE) Failed to load module "via" (no error, 0)
(EE) Failed to load module "openchrome" (no error, 0)

Again, I do end up with a working xorg.conf.new, so I'm not sure what, if any, effect these errors might have.

[curaga]

Nothing really, they should fail if you have no Via hw (or are using only the Nvidia card).

[Arslan S.]

gnu depmod fixes this problem, we had fixed this issue in tc 3.x days but i forgot to commit these changes in my local copies

add depmod to nvidia-module-*.tcz.dep files please if you can

[curaga]

Added.