WelcomeWelcome | FAQFAQ | DownloadsDownloads | WikiWiki

Author Topic: tinycore_v3.8rc2  (Read 26824 times)

Offline roberts

  • Retired Admins
  • Hero Member
  • *****
  • Posts: 7361
  • Founder Emeritus
Re: tinycore_v3.8rc2
« Reply #30 on: July 27, 2011, 09:54:30 AM »
Would need more specific information that could be reproduced. If not a local extension permission problem then possibly a low(er) memory system resulting in running out of inodes.
10+ Years Contributing to Linux Open Source Projects.

Offline bmarkus

  • Administrator
  • Hero Member
  • *****
  • Posts: 7183
    • My Community Forum
Re: tinycore_v3.8rc2
« Reply #31 on: July 27, 2011, 07:51:45 PM »
/tce directory is stored on HDD's /sda1 partition ext4 formatted. System is booting from USB stick. There is 2GB RAM, an Intel Core2 dual core CPU. No tricks, it's an ordinary rc2, no extension loaded to RAM. From one boot to another same happenes, it is not random. First loaded extensions work as expected, failing ones are at the end of onboot list. There are not too many extensions, thes setup is used to compile simple extensions. If you need I can provide the onboot list. It happened with intltool.tcz first but it's not significant I'm sure. Changing onboot to ondemand it works fine.
Béla
Ham Radio callsign: HA5DI

"Amateur Radio: The First Technology-Based Social Network."

Offline gerald_clark

  • TinyCore Moderator
  • Hero Member
  • *****
  • Posts: 4254
Re: tinycore_v3.8rc2
« Reply #32 on: July 27, 2011, 08:27:29 PM »
Sounds to me like a depfile error.
Programs may run or not run depending on the order they are loaded.


I would identify the first that fails, remove it and all that follow from onboot.lst.
Then reboot and tce-load -i each in turn and look for errors.

Offline roberts

  • Retired Admins
  • Hero Member
  • *****
  • Posts: 7361
  • Founder Emeritus
Re: tinycore_v3.8rc2
« Reply #33 on: July 27, 2011, 11:30:30 PM »
A depfile error should be found by using appsaudit. Order should not be a factor as dependencies are loaded prior to any parent extension.

There was a known issue with coreutils "overlaying" via path some busybox commands that are used to load the system. That issue was addressed in rc2

* Updated tce-setup & tce-load to ensure busybox calls thus avoiding conflicts with gnu utilities.

Sharing your onboot.lst would be helpful.
10+ Years Contributing to Linux Open Source Projects.

Offline gerald_clark

  • TinyCore Moderator
  • Hero Member
  • *****
  • Posts: 4254
Re: tinycore_v3.8rc2
« Reply #34 on: July 27, 2011, 11:34:18 PM »
AppsAudit will only find a missing dependency listed in a dep file, not one that is missing from a  dep file.

I have found several dep files that were in error this way.

Offline roberts

  • Retired Admins
  • Hero Member
  • *****
  • Posts: 7361
  • Founder Emeritus
Re: tinycore_v3.8rc2
« Reply #35 on: July 27, 2011, 11:40:37 PM »
True, but that should be caught by the extension maker. The very basis of initial testing and would indicate a rouge extension and not a bug in the base.
10+ Years Contributing to Linux Open Source Projects.

Offline bmarkus

  • Administrator
  • Hero Member
  • *****
  • Posts: 7183
    • My Community Forum
Re: tinycore_v3.8rc2
« Reply #36 on: July 28, 2011, 06:37:55 AM »
A depfile error should be found by using appsaudit. Order should not be a factor as dependencies are loaded prior to any parent extension.

There was a known issue with coreutils "overlaying" via path some busybox commands that are used to load the system. That issue was addressed in rc2

* Updated tce-setup & tce-load to ensure busybox calls thus avoiding conflicts with gnu utilities.

Sharing your onboot.lst would be helpful.


The problem is coreutils. Extensions loaded after coreutils are not symlinked. Removing coreutils from onboot list everything is OK.

It is rc2
Béla
Ham Radio callsign: HA5DI

"Amateur Radio: The First Technology-Based Social Network."

Offline roberts

  • Retired Admins
  • Hero Member
  • *****
  • Posts: 7361
  • Founder Emeritus
Re: tinycore_v3.8rc2
« Reply #37 on: July 28, 2011, 10:54:42 AM »
Thanks for reporting. Will look into it further.
10+ Years Contributing to Linux Open Source Projects.

Offline roberts

  • Retired Admins
  • Hero Member
  • *****
  • Posts: 7361
  • Founder Emeritus
Re: tinycore_v3.8rc2
« Reply #38 on: July 29, 2011, 01:35:08 AM »
Found, Fixed, and Verified.
10+ Years Contributing to Linux Open Source Projects.

Offline quanpin

  • Newbie
  • *
  • Posts: 28
Re: tinycore_v3.8rc2
« Reply #39 on: July 29, 2011, 10:30:16 AM »
v3.8rc1 and rc2 not support the max .tcz loop > /dev/loop87 ,  like gnome-desktop-base.tcz, it will echo" mount: could not find any free loop device.  "
but it can  run  in tc3.6 and 3.7.1 

Offline curaga

  • Administrator
  • Hero Member
  • *****
  • Posts: 11027
Re: tinycore_v3.8rc2
« Reply #40 on: July 29, 2011, 11:29:20 AM »
@quanpin

Hm, util-linux breakage as well? Would your loop86 be util-linux-ng by any chance?
The only barriers that can stop you are the ones you create yourself.

Offline quanpin

  • Newbie
  • *
  • Posts: 28
Re: tinycore_v3.8rc2
« Reply #41 on: July 29, 2011, 11:33:54 AM »
it will run as like base, and up to mount /dev/loop87 ,can't mount  loop any more.

Offline curaga

  • Administrator
  • Hero Member
  • *****
  • Posts: 11027
Re: tinycore_v3.8rc2
« Reply #42 on: July 29, 2011, 01:52:42 PM »
Yes, but what is your loop86 (/87)?
The only barriers that can stop you are the ones you create yourself.

Offline quanpin

  • Newbie
  • *
  • Posts: 28
Re: tinycore_v3.8rc2
« Reply #43 on: July 29, 2011, 07:55:03 PM »
/dev/loop82 on /tmp/tcloop/krb5 type squashfs (ro,relatime)
/dev/loop83 on /tmp/tcloop/cracklib type squashfs (ro,relatime)
/dev/loop84 on /tmp/tcloop/Linux-PAM type squashfs (ro,relatime)
/dev/loop85 on /tmp/tcloop/polkit type squashfs (ro,relatime)
/dev/loop86 on /tmp/tcloop/polkit-gnome type squashfs (ro,relatime)
/dev/loop87 on /tmp/tcloop/util-linux-ng type squashfs (ro,relatime)


/dev/loop82               1.1M      1.1M         0 100% /tmp/tcloop/krb5
/dev/loop83             160.0K    160.0K         0 100% /tmp/tcloop/cracklib
/dev/loop84             288.0K    288.0K         0 100% /tmp/tcloop/Linux-PAM
/dev/loop85             128.0K    128.0K         0 100% /tmp/tcloop/polkit
/dev/loop86              28.0K     28.0K         0 100% /tmp/tcloop/polkit-gnome
/dev/loop87             532.0K    532.0K         0 100% /tmp/tcloop/util-linux-ng


Offline roberts

  • Retired Admins
  • Hero Member
  • *****
  • Posts: 7361
  • Founder Emeritus
Re: tinycore_v3.8rc2
« Reply #44 on: July 29, 2011, 08:05:44 PM »
Similar to bmarkus coreutils issue. It should be resolved with next rc, 3.8rc3.  I wlll post it soon.
10+ Years Contributing to Linux Open Source Projects.