WelcomeWelcome | FAQFAQ | DownloadsDownloads | WikiWiki

Author Topic: Live CD for 486 machine  (Read 6001 times)

Offline ZFMicro

  • Newbie
  • *
  • Posts: 5
Live CD for 486 machine
« on: December 16, 2010, 03:51:43 PM »
Hello,

I can't get the live CD 3.0, 3.1 or 3.3 to get past the boot msg on a 486 machine.  I do have success on a Pentium (dark screen though).

I've tried various boot options such as norestore and base. No luck.

Additional info (not meant to be mean): DSL runs OK.

CPU= ZFx86 ZF Micro Solutions, Video= Silicon Motion SM712, LAN= Realtek 8139D

Thanks in advance.

Lee

Offline gerald_clark

  • TinyCore Moderator
  • Hero Member
  • *****
  • Posts: 4254
Re: Live CD for 486 machine
« Reply #1 on: December 16, 2010, 04:12:05 PM »
Remove the quiet boot option and see what messages you get.

Offline ZFMicro

  • Newbie
  • *
  • Posts: 5
Re: Live CD for 486 machine
« Reply #2 on: December 16, 2010, 04:44:33 PM »
Quiet Boot is not an option in my BIOS.

I can view two tinycore option selection screens once I get to a 'boot:' prompt via F2 and F3.  But the system (486) hangs after a selection.

Lee

Offline maro

  • Hero Member
  • *****
  • Posts: 1228
Re: Live CD for 486 machine
« Reply #3 on: December 16, 2010, 05:34:20 PM »
Yeah I guess it's a bit of a bummer that there is only one boot label defined in the 'isolinux.cfg' (which includes the 'quiet' boot code).

I've tried (without success) to find a way around this. If you could boot your system from a USB pendrive, you would be able to adjust the boot loader configuration accordingly. I assume on a fairly old system, that's not an option.

So you would have to re-master the ISO image to get rid of the 'quiet' boot code. As a bit a "naughty" alternative to this you could just use a hex editor and replace (!!) the five bytes that make up the word 'quiet' with five blank characters. Note: There are 3 occurences of this word in the TC 3.3 ISO image, but searching for 'tinycore.gz quiet' will bring you to the correct location. Bear in mind that the size of the image and the relative position of all other bytes need to remain the same, so no deletion of characters, just patching over the surplus boot code. Obviously you'll have to burn another CD-ROM with this patched (or re-mastered) ISO image.

All this makes me wonder whether TC should have an additional, non-default label in 'isolinux.cfg' that just does not feature the 'quiet' boot code.

Offline tinypoodle

  • Hero Member
  • *****
  • Posts: 3857
Re: Live CD for 486 machine
« Reply #4 on: December 17, 2010, 12:26:57 AM »
Emphasizing in same spirit, makes me wonder if quiet should not be removed from default label, and perhaps even a label with boot option 'debug' added.
Might make providing support to unexperienced users more easy.

Personally I would never choose 'quiet' as a boot option for my own use.
"Software gets slower faster than hardware gets faster." Niklaus Wirth - A Plea for Lean Software (1995)

Offline curaga

  • Administrator
  • Hero Member
  • *****
  • Posts: 10957
Re: Live CD for 486 machine
« Reply #5 on: December 17, 2010, 01:09:20 AM »
"tinycore debug"
The only barriers that can stop you are the ones you create yourself.

Offline ZFMicro

  • Newbie
  • *
  • Posts: 5
Re: Live CD for 486 machine
« Reply #6 on: December 17, 2010, 07:52:54 AM »
tinycore debug - still no joy, just a blinking cursor one line below 'boot'

Offline Guy

  • Hero Member
  • *****
  • Posts: 1089
Re: Live CD for 486 machine
« Reply #7 on: December 17, 2010, 08:35:32 AM »
I had one computer which would only boot with the default options. If anything was changed during boot, it would lock up.
Many people see what is. Some people see what can be, and make a difference.

Offline Guy

  • Hero Member
  • *****
  • Posts: 1089
Re: Live CD for 486 machine
« Reply #8 on: December 17, 2010, 08:42:46 AM »
What you could do is:

Remove the hard drive from the computer.

Put it in a computer where it works.

Install Tiny Core.

Put the hard drive back in the original computer.

This is one of the advantages of the frugal installation. You can't do this with a regularly installed operating system.
« Last Edit: December 17, 2010, 08:45:32 AM by Guy »
Many people see what is. Some people see what can be, and make a difference.

Offline tinypoodle

  • Hero Member
  • *****
  • Posts: 3857
Re: Live CD for 486 machine
« Reply #9 on: December 17, 2010, 12:15:05 PM »
tinycore debug - still no joy, just a blinking cursor one line below 'boot'

Fishing in dark waters, try additionally boot param 'acpi=off'
"Software gets slower faster than hardware gets faster." Niklaus Wirth - A Plea for Lean Software (1995)

Offline tinypoodle

  • Hero Member
  • *****
  • Posts: 3857
Re: Live CD for 486 machine
« Reply #10 on: December 17, 2010, 12:17:11 PM »
What you could do is:

Remove the hard drive from the computer.

Put it in a computer where it works.

Install Tiny Core.

Put the hard drive back in the original computer.

This is one of the advantages of the frugal installation. You can't do this with a regularly installed operating system.

Oh yes, you can.
Have done so many times with scatter installs of slackware and debian.
"Software gets slower faster than hardware gets faster." Niklaus Wirth - A Plea for Lean Software (1995)

Offline ZFMicro

  • Newbie
  • *
  • Posts: 5
Re: Live CD for 486 machine
« Reply #11 on: December 19, 2010, 06:57:14 AM »
I was hoping a live CD of a tiny os would work on a tiny cpu.

Offline tinypoodle

  • Hero Member
  • *****
  • Posts: 3857
Re: Live CD for 486 machine
« Reply #12 on: December 19, 2010, 09:54:55 AM »
You might want to have a look at the kernel config file and compare with your hardware.
"Software gets slower faster than hardware gets faster." Niklaus Wirth - A Plea for Lean Software (1995)