WelcomeWelcome | FAQFAQ | DownloadsDownloads | WikiWiki

Author Topic: Setting application preference setting permanent  (Read 3158 times)

Offline TroyB

  • Newbie
  • *
  • Posts: 37
Setting application preference setting permanent
« on: November 30, 2010, 02:52:21 PM »
Hi All,

I am having trouble keeping my application preference setting permanent, such as k3b, cups1311 and others, so when I login they are the same setting instead of the default settings, like every time I tried to set the preference setting in k3b it will not allow me too (crashes) or for cup1311, I need to add the printer every time I login.

Thanks for your time.
Troy

Offline gerald_clark

  • TinyCore Moderator
  • Hero Member
  • *****
  • Posts: 4254
Re: Setting application preference setting permanent
« Reply #1 on: November 30, 2010, 03:09:52 PM »
Please read the online documentation on the main website and wiki.
To save configuration changes, you must be using a persistent tce directory.
You then must edit the /opt/.filetool.lst file to include these config files.
When you shutdown with backup enabled, your changes will be saved.

Offline TroyB

  • Newbie
  • *
  • Posts: 37
Re: Setting application preference setting permanent
« Reply #2 on: December 01, 2010, 10:39:33 PM »
Hi Gerald,

Thanks for getting back to me.

I have read the FAQ & Wiki.

I'm not running off the cd, but from the HDD and have a persistant tce directory...this is my grub config file.

linux /boot/bzImage quiet tce=sda1 home=sda4 xvesa=1280x1024x24

I have included the following in /opt/.filetool.lst in your instruction.

usr/local/tce.installed/k3b
usr/local/tce.installed/cups1311

but still when I go into k3b to setup configuration setting it crashes on me.

What am I doing wrong here?

Thanks again for your time.
TroyB
« Last Edit: December 02, 2010, 08:41:31 AM by TroyB »

Online Juanito

  • Administrator
  • Hero Member
  • *****
  • Posts: 14516
Re: Setting application preference setting permanent
« Reply #3 on: December 01, 2010, 11:17:26 PM »
If you didn't already do so, you need set k3b and cups1311 as "onboot" using apps audit from the panel - this will load them each time you boot.

You should not put usr/local/tce.installed/k3b or cups1311 in filetool.lst, they will be loaded "ondemand" as above.

Since you set "home=sda4", anything under /home will be persistent.

Basically, you just need to add any configuration files not under /home to filetool.lst

From cups1311 info file:
Quote
Add the following lines to /opt/.filetool.lst
etc/cups/printers.conf
etc/cups/ppd

Offline TroyB

  • Newbie
  • *
  • Posts: 37
Re: Setting application preference setting permanent
« Reply #4 on: December 02, 2010, 07:33:48 AM »
Hi Juanito,

Thanks for the reply,

I have decided not to go with k3b, but would like a recommendation on an alternative to k3b which does not require gnome or kde.

As well, what do other people used for light weight, small memory footprint for the following GUI apps.

pdf reader
dvd & cd /ripper/burner/player combo if possible
file manager
text editor
web browser
office

I am still new to linux & its apps, but wish to have only a small memory footprint.

Evince
VLC & k3b (hopefully replaced)
PCman file manager
Leafpad
Chromium
openoffice

Thanks for your time.
TroyB

Offline Arslan S.

  • Hero Member
  • *****
  • Posts: 825
Re: Setting application preference setting permanent
« Reply #5 on: December 02, 2010, 08:02:54 AM »
brasero is not that heavy compared to k3b, and it does not even depend on gnome libs, also there is xfburn in the repository

on a base tiny core installation i usually prefer

xfe or emelfm2 as the file manager
leafpad or gedit (multi tab, code coloring, plugins etc.) as the text editor
chromium-browser as the web browser
vlc as the media player
evince or epdfview as the document viewer
sakura or gnome-terminal as the tabbed terminal emulator
brasero as the cd/dvd burner
« Last Edit: December 02, 2010, 08:13:21 AM by Arslan S. »

Offline Guy

  • Hero Member
  • *****
  • Posts: 1089
Re: Setting application preference setting permanent
« Reply #6 on: December 02, 2010, 08:19:11 AM »
I use:
epdfview
xfburn
xfe
leafpad
Firefox
Open Office

You can install extensions, and remove extensions. Try various ones, and see which you like.

Have you got the backup sorted out? You need to determine which files are modified by the application when you save settings, and add those to /opt/filetool.lst.

I also suggest persistent /opt. Include opt=sda1 in the boot options.
Many people see what is. Some people see what can be, and make a difference.

Offline TroyB

  • Newbie
  • *
  • Posts: 37
Re: Setting application preference setting permanent
« Reply #7 on: December 02, 2010, 08:57:54 AM »
Thanks Arslan & Guy for your response,

I will check out the following what you have suggested...

Guy, I have added opt=sda1 to grub.cfg, and will run those apps to determine where the settings are to be place in /opt/filetool.lst.

Thanks again for your help.

Offline tinypoodle

  • Hero Member
  • *****
  • Posts: 3857
Re: Setting application preference setting permanent
« Reply #8 on: December 02, 2010, 06:07:09 PM »
Please have a look at
http://forum.tinycorelinux.net/index.php?topic=7991.0
where many of your questions have already come up very recently.

You might want to have a look at xcdroast as a graphical frontend for cd burning and at ripperX-2.6.7 for ripping.
"Software gets slower faster than hardware gets faster." Niklaus Wirth - A Plea for Lean Software (1995)

Offline TroyB

  • Newbie
  • *
  • Posts: 37
Re: Setting application preference setting permanent
« Reply #9 on: December 02, 2010, 08:57:52 PM »
Thanks Tinypoodle for the links ;D

Now testing the new TC release 3.3.
« Last Edit: December 02, 2010, 10:22:00 PM by TroyB »