WelcomeWelcome | FAQFAQ | DownloadsDownloads | WikiWiki

Author Topic: tc2.11 - Netgear wg511 cardbus wireless adapter doesn't work  (Read 3551 times)

Offline bigpcman

  • Hero Member
  • *****
  • Posts: 719
Using wicd no wireless networks are found. It looks like the adapter has not been "turned on" - the leds never turn on. Any ideas?

Code: [Select]
tc@box:~$ lspci
00:00.0 Host bridge: Intel Corporation 82845 845 [Brookdale] Chipset Host Bridge (rev 04)
00:01.0 PCI bridge: Intel Corporation 82845 845 [Brookdale] Chipset AGP Bridge (rev 04)
00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 42)
00:1f.0 ISA bridge: Intel Corporation 82801CAM ISA Bridge (LPC) (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801CAM IDE U100 Controller (rev 02)
00:1f.5 Multimedia audio controller: Intel Corporation 82801CA/CAM AC'97 Audio Controller (rev 02)
00:1f.6 Modem: Intel Corporation 82801CA/CAM AC'97 Modem Controller (rev 02)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon Mobility M7 LW [Radeon Mobility 7500]
02:00.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 78)
02:01.0 CardBus bridge: Texas Instruments PCI1420 PC card Cardbus Controller
02:01.1 CardBus bridge: Texas Instruments PCI1420 PC card Cardbus Controller
03:00.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 62)
03:00.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 62)
03:00.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 65)
07:00.0 Network controller: Intersil Corporation ISL3890 [Prism GT/Prism Duette]/ISL3886 [Prism Javelin/Prism Xbow] (rev 01)

Code: [Select]
tc@box:~$ lsmod
Module                  Size  Used by    Not tainted
p54pci                  4928  0
p54common              14056  1 p54pci
mac80211               82100  2 p54pci,p54common
cfg80211               21604  1 mac80211
prism54                35076  0
vfat                    5652  1
fat                    29692  1 vfat
squashfs               11732 40
scsi_wait_scan           260  0
pcmcia                 13964  0
firmware_class          3188  3 p54pci,prism54,pcmcia
yenta_socket           13336  4
rsrc_nonstatic          5744  1 yenta_socket
pcmcia_core            16976  3 pcmcia,yenta_socket,rsrc_nonstatic
3c59x                  24700  0
parport_pc             18352  0
parport                18768  1 parport_pc
battery                 5976  0
ac                      1732  0
big pc man

Offline gwalther

  • Full Member
  • ***
  • Posts: 139
Re: tc2.11 - Netgear wg511 cardbus wireless adapter doesn't work
« Reply #1 on: May 14, 2010, 10:12:25 AM »
I have wg511 v2 (made in china one...Marvel chipset) working but had to use ndiswrapper.
Looks like you have the other version 2...made in Tawain... prism54 chipset
Did you load required  firmware...if not go here for info on getting it:
http://wireless.kernel.org/en/users/Drivers/p54#firmware




Offline curaga

  • Administrator
  • Hero Member
  • *****
  • Posts: 10957
Re: tc2.11 - Netgear wg511 cardbus wireless adapter doesn't work
« Reply #2 on: May 14, 2010, 11:27:26 AM »
Please post relevant lines of dmesg, and the output of ifconfig.
The only barriers that can stop you are the ones you create yourself.

Offline bigpcman

  • Hero Member
  • *****
  • Posts: 719
Re: tc2.11 - Netgear wg511 cardbus wireless adapter doesn't work
« Reply #3 on: May 14, 2010, 03:35:13 PM »
Please post relevant lines of dmesg, and the output of ifconfig.
Here you go ...
Code: [Select]
tc@box:~$ ifconfig
eth0      Link encap:Ethernet  HWaddr 00:08:74:94:8D:7F  
          inet addr:192.168.0.100  Bcast:192.168.0.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:21 errors:0 dropped:0 overruns:1 frame:0
          TX packets:2 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:4547 (4.4 KiB)  TX bytes:1180 (1.1 KiB)
          Interrupt:11 Base address:0x8c00

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
dmesg ...
Code: [Select]
Loaded prism54 driver, version 1.2
prism54 0000:07:00.0: enabling device (0000 -> 0002)
prism54 0000:07:00.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
eth1 (prism54): not using net_device_ops yet
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: US
        (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
        (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
        (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
        (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
        (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
        (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
        (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
cfg80211: Calling CRDA for country: US
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
eth0:  setting full-duplex.
eth1: resetting device...
eth1: uploading firmware...
prism54 0000:07:00.0: firmware: requesting isl3890
prism54: request_firmware() failed for 'isl3890'
eth1: could not upload firmware ('isl3890')
eth1: islpci_reset: failure

I think gwalther is right, the link he provided pretty much explains whats required. I'm now trying to get the wpc600n working first.
« Last Edit: May 14, 2010, 03:46:16 PM by bigpcman »
big pc man

Offline gerald_clark

  • TinyCore Moderator
  • Hero Member
  • *****
  • Posts: 4254
Re: tc2.11 - Netgear wg511 cardbus wireless adapter doesn't work
« Reply #4 on: May 14, 2010, 03:45:59 PM »
As stated earlier, you need the firmware installed.
You will either have to make an extension out of the firmware,
or include it in the backup.

Offline gwalther

  • Full Member
  • ***
  • Posts: 139
Re: tc2.11 - Netgear wg511 cardbus wireless adapter doesn't work
« Reply #5 on: May 14, 2010, 04:11:32 PM »
Here's another link for the firmware that is supposed to have worked for someone else:

http://daemonizer.de/prism54/prism54-fw/fw-fullmac/1.0.4.3.arm

download file...rename it ..isl3890... and put it in ...../lib/firmware....
then try plugging in card again...check ...dmesg...to see if it recognized and retrived firmware.

Offline bigpcman

  • Hero Member
  • *****
  • Posts: 719
Re: tc2.11 - Netgear wg511 cardbus wireless adapter doesn't work
« Reply #6 on: May 14, 2010, 04:32:26 PM »
Here's another link for the firmware that is supposed to have worked for someone else:

http://daemonizer.de/prism54/prism54-fw/fw-fullmac/1.0.4.3.arm

download file...rename it ..isl3890... and put it in ...../lib/firmware....
then try plugging in card again...check ...dmesg...to see if it recognized and retrived firmware.

I put the isl3890 file in /lib/firmware/.

Tried it with the following dmesg results ...
Code: [Select]
eth1: resetting device...
eth1: uploading firmware...
prism54 0000:07:00.0: firmware: requesting isl3890
prism54: request_firmware() failed for 'isl3890'
eth1: could not upload firmware ('isl3890')
eth1: islpci_reset: failure

So I guess the firmware goes somewhere else. Where is .../lib/firmware ?
« Last Edit: May 14, 2010, 04:51:37 PM by bigpcman »
big pc man

Offline gwalther

  • Full Member
  • ***
  • Posts: 139
Re: tc2.11 - Netgear wg511 cardbus wireless adapter doesn't work
« Reply #7 on: May 14, 2010, 05:25:54 PM »
You where correct...I meant .../lib/firmware/.....
which download link did you try...first or second one?...the first one has later version.....changing the name of the file is unusual..I know but I think the ...arm file contains multiple  sets of firmware.
Also may need to check/change  permissions and ownership of firmware file...isl3890

Offline bigpcman

  • Hero Member
  • *****
  • Posts: 719
Re: tc2.11 - Netgear wg511 cardbus wireless adapter doesn't work
« Reply #8 on: May 14, 2010, 07:01:57 PM »
You where correct...I meant .../lib/firmware/.....
which download link did you try...first or second one?...the first one has later version.....changing the name of the file is unusual..I know but I think the ...arm file contains multiple  sets of firmware.
Also may need to check/change  permissions and ownership of firmware file...isl3890
I used the last link you gave me. The Driver files are on sda1 which is a fat disk so no permissions allowed.
big pc man

Offline curaga

  • Administrator
  • Hero Member
  • *****
  • Posts: 10957
Re: tc2.11 - Netgear wg511 cardbus wireless adapter doesn't work
« Reply #9 on: May 15, 2010, 03:26:36 AM »
The dir is /lib/firmware (in the TC ram filesystem), or if you make an extension, /usr/local/lib/firmware.
The only barriers that can stop you are the ones you create yourself.

Offline bigpcman

  • Hero Member
  • *****
  • Posts: 719
Re: tc2.11 - Netgear wg511 cardbus wireless adapter doesn't work
« Reply #10 on: May 15, 2010, 05:31:07 AM »
The dir is /lib/firmware (in the TC ram filesystem), or if you make an extension, /usr/local/lib/firmware.

My mistake I did put the driver in the tc file system /lib/firmware, it was the ndiswrapper driver that I put in the /mnt/sda1/driver.  At this point I have given up on wireless using the hardware I have.
big pc man