WelcomeWelcome | FAQFAQ | DownloadsDownloads | WikiWiki

Author Topic: tinycore_v2.9rc3  (Read 12195 times)

Offline Jason W

  • Administrator
  • Hero Member
  • *****
  • Posts: 9680
Re: tinycore_v2.9rc3
« Reply #30 on: February 14, 2010, 06:43:37 AM »
Chromium works fine here with booting as "base norestore" and loading chromium from ibiblio.

Posting from it now.

Offline jur

  • Hero Member
  • *****
  • Posts: 863
    • cycling photo essays
Re: tinycore_v2.9rc3
« Reply #31 on: February 14, 2010, 06:37:27 PM »
If I chown /dev/shm to tc.staff chromium works, but it boots up as root.root, both on usb stick and hard drive.

Offline jur

  • Hero Member
  • *****
  • Posts: 863
    • cycling photo essays
Re: tinycore_v2.9rc3
« Reply #32 on: February 14, 2010, 11:59:02 PM »
Besides the issue of /dev/shm ownership, there is also the string of messages I get when the onboot extensions are loading. I wonder if this might be some race condition, as the number of those messages is not always the same. But they do not appear to have any negative effect that I can see.

Offline curaga

  • Administrator
  • Hero Member
  • *****
  • Posts: 10207
Re: tinycore_v2.9rc3
« Reply #33 on: February 15, 2010, 12:31:04 AM »
The ownership should not matter with 1777 permissions.
The only barriers that can stop you are the ones you create yourself.

Offline jur

  • Hero Member
  • *****
  • Posts: 863
    • cycling photo essays
Re: tinycore_v2.9rc3
« Reply #34 on: February 15, 2010, 02:16:32 AM »
Of course, I should have said it boots up with 755 permissions.

Offline jur

  • Hero Member
  • *****
  • Posts: 863
    • cycling photo essays
Re: tinycore_v2.9rc3
« Reply #35 on: February 15, 2010, 02:33:49 AM »
Here's another thing:

I have only a few things in .filetool.lst, such as /etc/X11/xorg.conf and a few other setup files. I have persistent /opt and /home. I don't have bootlocal.sh and .filetool.lst in there.

rc3 trashes my bootlocal.sh and filetool.lst files, overwriting what was in persistent /opt with the default ones. There may be other files that would be affected; these are the ones I know of.

Offline Juanito

  • Administrator
  • Hero Member
  • *****
  • Posts: 11901
Re: tinycore_v2.9rc3
« Reply #36 on: February 15, 2010, 02:40:00 AM »
Could you cut & paste the boot codes you're using?

Offline jur

  • Hero Member
  • *****
  • Posts: 863
    • cycling photo essays
Re: tinycore_v2.9rc3
« Reply #37 on: February 15, 2010, 03:00:29 AM »
Code: [Select]
tc@box:~$ showbootcodes
quiet tce=sda7 opt=sda7 home=sda7 max_loop=255 tz=EST,M10.1.0/2,M4.1.0/2 noicons

Offline curaga

  • Administrator
  • Hero Member
  • *****
  • Posts: 10207
Re: tinycore_v2.9rc3
« Reply #38 on: February 15, 2010, 05:27:27 AM »
Hmm, on a pristine MC 2.9rc3 boot I get 1777 permissions. Could it be it doesn't get mounted for some reason on your system? It could be the buggy busybox version.

Please post the output of mount.
The only barriers that can stop you are the ones you create yourself.

Offline helander

  • Full Member
  • ***
  • Posts: 183
Re: tinycore_v2.9rc3
« Reply #39 on: February 15, 2010, 10:21:31 AM »
I was browsing the code in tce-load and from what I understood the recursive load would not work as I would have expected. I then made this simple test:

   I created four extensions having the following dependency chain:

        A.tcz -> B.tcz -> C.tcz -> D.tcz     ( x -> y means that x.dep contains y)

When I installed A.tcz, only B.tcz was not installed. I would have expected all four extensions to be installed due to dependency chain.

The recursive scan of the dependency chain only operates on the .dep files available in tce/optional and when that is done none of B.tcz.dep, C.tcz.dep have yet been loaded and are not considered in the scan.

/Lars

Offline roberts

  • Administrator
  • Hero Member
  • *****
  • Posts: 7361
  • Founder Emeritus
Re: tinycore_v2.9rc3
« Reply #40 on: February 15, 2010, 01:46:07 PM »
Load Local never tries to acces the repository for further downloads.
Since only a "local load" request is being made it would imply that a previous download from a repository was completed and the supporting files are available in tce/optional. Or is this going to be supporting partial broken downlooads while in the midst of a recursive download chain.



10+ Years Contributing to Linux Open Source Projects.

Offline jur

  • Hero Member
  • *****
  • Posts: 863
    • cycling photo essays
Re: tinycore_v2.9rc3
« Reply #41 on: February 15, 2010, 04:12:20 PM »
mount output on my usb stick:
Code: [Select]
rootfs on / type rootfs (rw)
tmpfs on / type tmpfs (rw,size=689208k)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
devpts on /dev/pts type devpts (rw,mode=600)
tmpfs on /dev/shm type tmpfs (rw)
/dev/sdb1 on /mnt/sdb1 type vfat (rw,fmask=0000,dmask=0000,allow_utime=0022,codepage=cp437,iocharset=iso8859-1)
/dev/loop0 on /tmp/tcloop/cairo type squashfs (ro)
/dev/loop1 on /tmp/tcloop/expat2 type squashfs (ro)
/dev/loop2 on /tmp/tcloop/fontconfig type squashfs (ro)
/dev/loop3 on /tmp/tcloop/glib2 type squashfs (ro)
/dev/loop4 on /tmp/tcloop/graphics-libs-1 type squashfs (ro)
/dev/loop5 on /tmp/tcloop/libglade type squashfs (ro)
/dev/loop6 on /tmp/tcloop/libxml2 type squashfs (ro)
/dev/loop7 on /tmp/tcloop/pango type squashfs (ro)
/dev/loop8 on /tmp/tcloop/pixman type squashfs (ro)
/dev/loop9 on /tmp/tcloop/tint2 type squashfs (ro)
/dev/loop10 on /tmp/tcloop/915resolution type squashfs (ro)
/dev/loop11 on /tmp/tcloop/atk type squashfs (ro)
/dev/loop12 on /tmp/tcloop/gtk2 type squashfs (ro)
/dev/loop13 on /tmp/tcloop/libstartup-notification type squashfs (ro)
/dev/loop14 on /tmp/tcloop/ttf-bitstream-vera type squashfs (ro)
/dev/loop15 on /tmp/tcloop/Xlibs_support type squashfs (ro)
/dev/loop16 on /tmp/tcloop/libxcb type squashfs (ro)
/dev/loop17 on /tmp/tcloop/libxcb-util type squashfs (ro)
/dev/loop18 on /tmp/tcloop/openbox type squashfs (ro)
/dev/loop19 on /tmp/tcloop/file type squashfs (ro)
/dev/loop20 on /tmp/tcloop/shared-mime-info type squashfs (ro)
/dev/loop21 on /tmp/tcloop/rox-filer type squashfs (ro)
I can't check my hard disk frugal install ATM but I konw it exhibits rw on /dev/shm as well.

Offline roberts

  • Administrator
  • Hero Member
  • *****
  • Posts: 7361
  • Founder Emeritus
Re: tinycore_v2.9rc3
« Reply #42 on: February 15, 2010, 05:11:11 PM »
Quote
/dev/sdb1 on /mnt/sdb1 type vfat
  google "chromium on vfat" ...
10+ Years Contributing to Linux Open Source Projects.

Offline jur

  • Hero Member
  • *****
  • Posts: 863
    • cycling photo essays
Re: tinycore_v2.9rc3
« Reply #43 on: February 15, 2010, 05:16:13 PM »
Quote
/dev/sdb1 on /mnt/sdb1 type vfat
  google "chromium on vfat" ...
Did you miss where I said I get exactly the same behaviour on my hard drive install as well? Well that is not vfat, it's ext3.

Offline helander

  • Full Member
  • ***
  • Posts: 183
Re: tinycore_v2.9rc3
« Reply #44 on: February 15, 2010, 09:59:27 PM »
Load Local never tries to acces the repository for further downloads.
Since only a "local load" request is being made it would imply that a previous download from a repository was completed and the supporting files are available in tce/optional. Or is this going to be supporting partial broken downlooads while in the midst of a recursive download chain.






You assumed for some reason that a "local load" wa being made. That assumption was wrong.

Goodbye