WelcomeWelcome | FAQFAQ | DownloadsDownloads | WikiWiki

Author Topic: tinycore_v2.6rc3  (Read 5529 times)

Offline roberts

  • Administrator
  • Hero Member
  • *****
  • Posts: 7361
  • Founder Emeritus
tinycore_v2.6rc3
« on: November 21, 2009, 03:10:29 PM »
The Third Release Candidate of v2.6 (tinycore_2.6rc3.iso), is now posted and ready for testing only.
http://distro.ibiblio.org/pub/linux/distributions/tinycorelinux/2.x/release_candidates

tinycore_2.6rc3.iso
tinycore_2.6rc3.iso.md5.txt

Change log for v2.6rc3:

* Dropped upx'ed bzImage due to reported system errors.
* Updated rebuildfstab to reflect removals..
* Updated select utility added paging through long select lists.
* Updated tc-restore.sh. restore boot option overrides default backup location.

Notes:
You must have your tcz collection updated, i.e., all squashfs and all with 4096 block size.

Be sure to update your kernel..

The distribution files are also availble:
http://distro.ibiblio.org/pub/linux/distributions/tinycorelinux/2.x/release_candidates/distribution_files

Please check md5sums after downloading..
10+ Years Contributing to Linux Open Source Projects.

Offline Machete

  • WikiUser
  • *
  • Posts: 12
Re: tinycore_v2.6rc3
« Reply #1 on: November 21, 2009, 05:06:15 PM »
This new RC rocks! No more ACPI errors in virtualbox, and it booted in 15 seconds, including BIOS start-up stuff!  ;D

Offline fisher

  • WikiUser
  • *
  • Posts: 7
Re: tinycore_v2.6rc3
« Reply #2 on: November 21, 2009, 06:47:35 PM »
Fast boot and wifi works with rc3.  Mouse movement is smooth.  ACPI works.  No BIOS errors.  Great job everyone involved.  Thanks!

Offline jur

  • Hero Member
  • *****
  • Posts: 863
    • cycling photo essays
Re: tinycore_v2.6rc3
« Reply #3 on: November 21, 2009, 07:55:47 PM »
Does not find my persistent stuff so boots into cloud mode. I dropped it into an existing test partition with extensions and also started from scratch, same result.

Offline roberts

  • Administrator
  • Hero Member
  • *****
  • Posts: 7361
  • Founder Emeritus
Re: tinycore_v2.6rc3
« Reply #4 on: November 21, 2009, 07:57:37 PM »
Try adding waitusb=5 to see if that helps.
10+ Years Contributing to Linux Open Source Projects.

Offline jur

  • Hero Member
  • *****
  • Posts: 863
    • cycling photo essays
Re: tinycore_v2.6rc3
« Reply #5 on: November 21, 2009, 09:35:18 PM »
I am booting from internal HD.

I have done some tests and it is associated with the file tinycore.gz. I can boot OK with tinycore-2.5 and bzImage-2.6rc3 but no combination that includes tinycore.gz-26.rc3 succeeds.

As it boots I see a brief message about it not finding device, and that persistent home is disabled or something. This is on partition sda8.
« Last Edit: November 21, 2009, 09:38:10 PM by jur »

Offline roberts

  • Administrator
  • Hero Member
  • *****
  • Posts: 7361
  • Founder Emeritus
Re: tinycore_v2.6rc3
« Reply #6 on: November 21, 2009, 09:42:56 PM »
Please post the output of "fdisk -l" , "cat /etc/fstab", and "showbootcodes"
10+ Years Contributing to Linux Open Source Projects.

Offline philip

  • Full Member
  • ***
  • Posts: 125
Re: tinycore_v2.6rc3
« Reply #7 on: November 21, 2009, 09:48:44 PM »
On my Acer Aspire One netbook (where an 8GB SSD replaces a conventional HDD) I dual-boot Ubuntu and TC using grub to choose. All TC materials are on the SSD. In this setup the boot option waitusb is essential for 2.6rc3 to notice the extensions in /dev/sda1/tce in time to load them. (When they don't get noticed, the boot is extremely quick!) This issue is new with 2.6rc3; everything up to 2.6rc2 needed no waitusb. I know that waitusb=3 works and that no waitusb parameter doesn't; I haven't experimented on how low I can go. [This extra wrinkle may confuse newcomers to TC, but IMHO it's a good sign that the init scripts are getting ever faster and more efficient. So please receive these remarks as a report and not at all a complaint.]

A confusing behaviour: even with waitusb=3 or 5, 2.6rc3 seems not to find the file mydata.tgz on the root of device /dev/sda1. The result is that /opt does not get populated with my preferred scripts, and /opt/bootlocal.sh does not get recalled from the backup, so a bunch of user-specified initialization is not happening. I know that the file mydata.tgz is still intact because booting TC2.5 still loads it OK.

It may be useful to mention that the kernel in 2.6rc3 is the same one used in all versions 2.0-2.5. Users (like me) who kept the old one around can just go back to using it ... the experimental kernel in earlier RC's for 2.6 was functionally identical, only compressed for size. [I think this means that users like me for whom the upx-compressed kernel actually worked could keep using it instead of reverting, but that would slightly violate the spirit of helping test the full RC as proposed.]

With thanks, as always.

Offline roberts

  • Administrator
  • Hero Member
  • *****
  • Posts: 7361
  • Founder Emeritus
Re: tinycore_v2.6rc3
« Reply #8 on: November 21, 2009, 10:01:16 PM »
Philip, are you using restore=sda1 or autoscan?
10+ Years Contributing to Linux Open Source Projects.

Offline jur

  • Hero Member
  • *****
  • Posts: 863
    • cycling photo essays
Re: tinycore_v2.6rc3
« Reply #9 on: November 21, 2009, 10:08:05 PM »
My bootcodes:
quiet tce=sda8 opt=sda8 home=sda8 max_loop=255 tz=EST,M10.1.0/2,M4.1.0/2


These were gathered while booting off v 2.6rc3 both files.

Offline roberts

  • Administrator
  • Hero Member
  • *****
  • Posts: 7361
  • Founder Emeritus
Re: tinycore_v2.6rc3
« Reply #10 on: November 21, 2009, 10:35:40 PM »
Thanks for the feedback. I think it may be a race condition.
I might have a fix. We will see.
10+ Years Contributing to Linux Open Source Projects.

Offline jur

  • Hero Member
  • *****
  • Posts: 863
    • cycling photo essays
Re: tinycore_v2.6rc3
« Reply #11 on: November 21, 2009, 10:58:51 PM »
That sounds like it could be it. I just tried again and it was successful once, then cloud again afterwards.

Offline philip

  • Full Member
  • ***
  • Posts: 125
Re: tinycore_v2.6rc3
« Reply #12 on: November 21, 2009, 11:33:21 PM »
Philip, are you using restore=sda1 or autoscan?

Code: [Select]
$ cat /proc/cmdline
waitusb=3 tce=sda1 vga=789 desktop=flwm host=min toram nodhcp quiet elevator=noop

Thanks.

Offline thane

  • Hero Member
  • *****
  • Posts: 653
Re: tinycore_v2.6rc3
« Reply #13 on: November 22, 2009, 12:51:37 AM »
FWIW, I boot off a read-only CD and have the backup file and tce directory on a usb stick (i.e. both directly under sda1).

When I booted 2.6 rc3 with waitusb=5 TCL loaded my extensions OK but didn't load the mydata.tgz info (e.g. no Opera settings, no wallpaper). Didn't see the boot message indicating that it was restoring from backup either. Tried using waitusb=5 restore=sda1 and same result,

Offline bmarkus

  • Administrator
  • Hero Member
  • *****
  • Posts: 7035
    • My Community Forum
Re: tinycore_v2.6rc3
« Reply #14 on: November 22, 2009, 01:00:34 AM »
First, booting problems are gone, it loads and starts fine.

Installing wicd.tcz with appbrowser I get consequently a HTTP server error message echoed by wget:

Quote
... Range Not Satisfiable on wicd.tcz

Strange is, that wicd.tcz is not stored in /tce but the module itself is loaded into the RAM and listed in tcz2ram.lst too.



« Last Edit: November 22, 2009, 01:08:09 AM by bmarkus »
Béla
Ham Radio callsign: HA5DI

"Amateur Radio: The First Technology-Based Social Network."