WelcomeWelcome | FAQFAQ | DownloadsDownloads | WikiWiki

Author Topic: firmware-iwl9000.tcz  (Read 1091 times)

Offline Rabie

  • Sr. Member
  • ****
  • Posts: 252
firmware-iwl9000.tcz
« on: December 26, 2021, 03:19:39 PM »
Hi,

i have an device called "ZBOX CI329 nano"  https://www.amazon.de/gp/product/B07H569HM2/ref=as_li_tl?ie=UTF8&creativeASIN=B07H569HM2&linkCode=as2&tag=elefacts-21

it has the device IntelĀ® Wireless-AC 9462 and the driver there for is "firmware-iwl9000.tcz"

On TinyCore version 10. x86 and 10. 10. x86_64 everything works fine

The driver does not work on both version 11x and 12x , x86 and x86_64

when starting with the driver i get this while booting: https://www.dropbox.com/s/s0e6yn93btg1o4a/Unbenannt3.PNG?dl=0
and the Ethernet adapters doesn't get up
« Last Edit: December 26, 2021, 03:23:09 PM by Rabie »

Offline curaga

  • Administrator
  • Hero Member
  • *****
  • Posts: 10668
Re: firmware-iwl9000.tcz
« Reply #1 on: December 27, 2021, 12:00:19 AM »
Kernel bug, but we don't know where since that's posted earlier (instead of taking a picture, please copypaste text from dmesg). In any case, your easiest options are using 10.x or waiting for 13.x.
The only barriers that can stop you are the ones you create yourself.

Offline Rabie

  • Sr. Member
  • ****
  • Posts: 252
Re: firmware-iwl9000.tcz
« Reply #2 on: December 27, 2021, 02:12:02 AM »
Kernel bug, but we don't know where since that's posted earlier (instead of taking a picture, please copypaste text from dmesg). In any case, your easiest options are using 10.x or waiting for 13.x.

Hi curaga,

i think this is the relevant text from dmesg:
Code: [Select]
loop: module loaded
zram0: detected capacity change from 0 to 465920000
random: mkswap: uninitialized urandom read (16 bytes read)
Adding 454996k swap on /dev/zram0.  Priority:-2 extents:1 across:454996k SSFS
squashfs: version 4.0 (2009/01/31) Phillip Lougher
EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
random: crng init done
Linux agpgart interface v0.103
platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
platform regulatory.0: Falling back to sysfs fallback for: regulatory.db
i801_smbus 0000:00:1f.1: SPD Write Disable is set
i801_smbus 0000:00:1f.1: SMBus using PCI interrupt
i2c i2c-0: 1/2 memory slots populated (from DMI)
i2c i2c-0: Successfully instantiated SPD at 0x50
Intel(R) Wireless WiFi driver for Linux
iwlwifi 0000:00:0c.0: Direct firmware load for iwlwifi-9000-pu-b0-jf-b0-46.ucode failed with error -2
iwlwifi 0000:00:0c.0: Falling back to sysfs fallback for: iwlwifi-9000-pu-b0-jf-b0-46.ucode
i915 0000:00:02.0: [drm] VT-d active for gfx access
i915 0000:00:02.0: vgaarb: deactivate vga console
Console: switching to colour dummy device 80x25
i915 0000:00:02.0: [drm] couldn't get memory information
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
mei_hdcp 0000:00:0f.0-b638ab7e-94e2-4ea2-a552-d1c54b627f04: bound 0000:00:02.0 (ops 0xfafbe240)
i915 0000:00:02.0: Direct firmware load for i915/glk_dmc_ver1_04.bin failed with error -2
i915 0000:00:02.0: Falling back to sysfs fallback for: i915/glk_dmc_ver1_04.bin
cfg80211: failed to load regulatory.db
i915 0000:00:02.0: [drm] Failed to load DMC firmware i915/glk_dmc_ver1_04.bin. Disabling runtime power management.
i915 0000:00:02.0: [drm] DMC firmware homepage: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915
[drm] Initialized i915 1.6.0 20200917 for 0000:00:02.0 on minor 0
ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
fbcon: i915drmfb (fb0) is primary device
Console: switching to colour frame buffer device 160x64
ee1004 0-0050: 512 byte EE1004-compliant SPD EEPROM, read-only
i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
BUG: unable to handle page fault for address: fad5227b
#PF: supervisor write access in kernel mode
#PF: error_code(0x0003) - permissions violation
*pde = 06d07067 *pte = 70d8e161
Oops: 0003 [#1] SMP
CPU: 3 PID: 256 Comm: kworker/3:2 Not tainted 5.10.3-tinycore #2021
Hardware name: ZOTAC ZBOX-CI329NANO/Default string, BIOS 5.13 12/20/2019
Workqueue: events 0xc048445a
EIP: 0xf9265150
Code: ff ff ff 40 c3 55 89 e5 57 56 89 d6 53 89 c3 83 ec 08 8b 46 04 8b 7a 10 8b 52 14 8d 48 08 89 4d f0 83 f8 3f 0f 86 a7 00 00 00 <c6> 46 37 00 8b 43 1c 83 ff 3f 76 08 57 68 62 84 27 f9 eb
0e 8d 4a
EAX: 00000040 EBX: c1b04010 ECX: 00000048 EDX: 00000006
ESI: fad52244 EDI: 0000000c EBP: c18efe88 ESP: c18efe74
DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 EFLAGS: 00010212
CR0: 80050033 CR2: fad5227b CR3: 07304000 CR4: 00350ed0
Cal l Trace:
 0xf9265cdd
 ? 0xf926512b
 0xf925811b
 ? 0xc0483f6c
 ? 0xc0483ce5
 ? 0xc04841f6
 0xc0484486
 0xc01572e1
 0xc01576e8
 0xc015ad02
 ? 0xc0157584
 ? 0xc015ac30
 0xc0100c09
Modules linked in: ee1004 i915 iwlwifi i2c_i801 i2c_smbus drm_kms_helper fb_sys_fops syscopyarea sysfillrect sysimgblt cfg80211 drm intel_gtt agpgart cec squashfs loop ums_realtek hid_a4tech video backlight mei_hdcp sdhci_pci cqhci sdhci mmc_core serio_raw processor_thermal_device intel_soc_dts_iosf int340x_thermal_zone pcspkr xhci_pci xhci_hcd realtek xhci_pci_renesas mei_me pinctrl_geminilake r8169 mei
CR2: 00000000fad5227b
---[ end trace 980303bd47af2e1e ]---
EIP: 0xf9265150
Code: ff ff ff 40 c3 55 89 e5 57 56 89 d6 53 89 c3 83 ec 08 8b 46 04 8b 7a 10 8b 52 14 8d 48 08 89 4d f0 83 f8 3f 0f 86 a7 00 00 00 <c6> 46 37 00 8b 43 1c 83 ff 3f 76 08 57 68 62 84 27 f9 eb 0e 8d 4a
EAX: 00000040 EBX: c1b04010 ECX: 00000048 EDX: 00000006
ESI: fad52244 EDI: 0000000c EBP: c18efe88 ESP: c18efe74
DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 EFLAGS: 00010212
CR0: 80050033 CR2: fad5227b CR3: 07304000 CR4: 00350ed0
r8169 0000:02:00.0: Direct firmware load for rtl_nic/rtl8168g-2.fw failed with error -2
r8169 0000:02:00.0: Falling back to sysfs fallback for: rtl_nic/rtl8168g-2.fw
Generic FE-GE Realtek PHY r8169-200:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE)
r8169 0000:02:00.0 eth1: Link is Down


Quote
or waiting for 13.x.
is there already a release date ?

Quote
your easiest options are using 10.x or waiting

What would be my hardest options to get the driver to work?
« Last Edit: December 27, 2021, 02:14:27 AM by Rabie »

Offline Juanito

  • Administrator
  • Hero Member
  • *****
  • Posts: 13850
Re: firmware-iwl9000.tcz
« Reply #3 on: December 27, 2021, 03:15:01 AM »
is there already a release date ?

In a day or two

Offline curaga

  • Administrator
  • Hero Member
  • *****
  • Posts: 10668
Re: firmware-iwl9000.tcz
« Reply #4 on: December 27, 2021, 07:50:30 AM »
What would be my hardest options to get the driver to work?
Build a debug kernel to see which module and line caused the bug, then see if there exists a patch. If one exists, apply it to the version you want to use.
The only barriers that can stop you are the ones you create yourself.

Offline Rabie

  • Sr. Member
  • ****
  • Posts: 252
Re: firmware-iwl9000.tcz
« Reply #5 on: December 27, 2021, 08:34:58 AM »
What would be my hardest options to get the driver to work?
Build a debug kernel to see which module and line caused the bug, then see if there exists a patch. If one exists, apply it to the version you want to use.

Hi Curaga,
ok i am not that pro yet, i would prefer to wait for the new Kernel 13x  :-X ;D

Offline Rabie

  • Sr. Member
  • ****
  • Posts: 252
Re: firmware-iwl9000.tcz
« Reply #6 on: January 01, 2022, 05:34:35 AM »
is there already a release date ?

In a day or two

how to get notified once TC13 is released for users ?

Offline Rich

  • Administrator
  • Hero Member
  • *****
  • Posts: 10215
Re: firmware-iwl9000.tcz
« Reply #7 on: January 01, 2022, 06:49:39 AM »
Hi Rabie
The  Tiny Core 13.0 Alpha 1  version is available if you want to test it out:
http://forum.tinycorelinux.net/index.php/topic,25422.0.html

Offline Rabie

  • Sr. Member
  • ****
  • Posts: 252
Re: firmware-iwl9000.tcz
« Reply #8 on: January 01, 2022, 07:00:28 AM »
Hi Rabie
The  Tiny Core 13.0 Alpha 1  version is available if you want to test it out:
http://forum.tinycorelinux.net/index.php/topic,25422.0.html

Hi Rich,
is there an instruction how to install it ?


Offline Rich

  • Administrator
  • Hero Member
  • *****
  • Posts: 10215
Re: firmware-iwl9000.tcz
« Reply #9 on: January 01, 2022, 10:21:12 AM »
Hi Rabie
I think the simplest way for testing would be to:
1. Get a blank USB thumb drive.
2. Do an install use a TC12 ISO.
3. Replace the vmlinuz64 with the one found here:
http://repo.tinycorelinux.net/13.x/x86_64/release_candidates/distribution_files/
4. Using files from above link, replace corepure64.gz with a replacement made like this:
Code: [Select]
cat rootfs64.gz modules64.gz > corepure64.gz5. Boot the thumb drive.
6. Update the extensions:
Code: [Select]
tce-audit builddb
tce-audit updatedeps
tce-audit fetchmissing
tce-update
7. Reboot.

Offline Rabie

  • Sr. Member
  • ****
  • Posts: 252
Re: firmware-iwl9000.tcz
« Reply #10 on: January 01, 2022, 10:34:08 AM »
thank you

Offline Rich

  • Administrator
  • Hero Member
  • *****
  • Posts: 10215
Re: firmware-iwl9000.tcz
« Reply #11 on: January 01, 2022, 11:20:58 AM »
Hi Rabie
You are welcome.