WelcomeWelcome | FAQFAQ | DownloadsDownloads | WikiWiki

Author Topic: Wireshark failed to start  (Read 2065 times)

Offline aapolon

  • Newbie
  • *
  • Posts: 1
Wireshark failed to start
« on: March 11, 2019, 08:26:33 AM »
I installed Wireshark into TC v.10.0, but it is failed to start.

TC v.7.2 is the latest version which can run Wireshark. All later versions failed to run Wireshark.

Offline Rich

  • Administrator
  • Hero Member
  • *****
  • Posts: 11178
Re: Wireshark failed to start
« Reply #1 on: March 11, 2019, 08:28:43 AM »
Hi aapolon
If you open a terminal and enter  wireshark , do you get any warning or error messages?

Offline Rich

  • Administrator
  • Hero Member
  • *****
  • Posts: 11178
Re: Wireshark failed to start
« Reply #2 on: March 11, 2019, 08:36:07 AM »
Hi aapolon
Are you running  Xorg  or  Xvesa? According to the  .info  file:
Code: [Select]
Title:          wireshark.tcz
Description:    network protocol analyzer
Version:        2.2.1
Author:         see list of sites below
Original-site:  see list of sites below
Copying-policy: see list of sites below
Size: 22MB
Extension_by:   juanito
Tags:         network protocol analyzer
Comments:       network protocol analyzer
                ----------
                *** use with Xorg-7.7 ***
                ----------
                This extension contains:
                wireshark-2.2.1 - MIT - https://www.wireshark.org/download/src/all-versions/wireshark-2.2.1.tar.bz2
                ----------
Change-log:     2017/02/07 first version
Current:        2017/05/29 recompiled for updated libgcrypt
you need to be running  Xorg.

... TC v.7.2 is the latest version which can run Wireshark. ...
That appears to be the last version that did not include the Xorg comment.
« Last Edit: March 11, 2019, 08:40:51 AM by Rich »