Tiny Core Base > TCB Bugs

mount tool bug?

(1/4) > >>

dcyran:
Hi
this seems like a bug to me.

I'm using CorePlus via a burned CD, on a Dell Latitue E6410 -with 2 usb sticks plugged in after the boot.

When I mouse over the partitions (dell has sda1 sda2 sda3 sda5; usb#1 sdb1; usb#2 sdc1 sdc2) I can see the LABEL name.

the dell correctly has respectfully: DellUtility, RECOVERY, OS, and READER; usb#1 has CorePlus for sdb1; and usb#2 has DellUtility for sdc1 and RECOVERY for sdc2

BUT... gparted correctly  lists sdc1 as blank "", and sdc2 as "7gext2"  (I just dd'd a new iso onto usb#1 -sdb1 and gparted displays the new LABEL as "Debian 9.4.0 n"

the Labels for the sdc1 and sdc2 are just repeats of sda1 and sda2.

What do guys think is up?

curaga:
I believe they come from the blkid output. Try running blkid.

dcyran:
thanks -but will do at a later time

I tried to reproduce this weird LABEL thing -but could not  (same machine and cd, same usb but altered)     

But I then noticed sr0 was listed twice    -all the labels were correct.     

I had just re-installed tc9 to the usb and then booted from this usb and installed gparted. 

Strange;  I'll take more time and try to record my actions and observations better.  Yesterday I took a short cut that caused issues - I had copied over some files from tc9 to an older tc boot usb disk with expectations that this would be a good tc9 boot usd disk.

dcyran:
Hi -back again with some weirdness;
mount tool shows double entries (from top to bottom: sda1, sda1, sda2, sda2, sda3, sda3, sda5,sda5, sdb1, sdb1, sr0, sr0 -only the sr0 (both) are green/mounted, others red/not mounted)

I booted tc9.0 off a cd ( burnt a CorePlus 9.0 32 bit iso on it; usually works fine/as expected) on a dell laptop e6410 with 4GB; after the usual boot i inserted a flash drive, and then clicked on the mount tool icon. CorePlus exists only on the cd/no other partition has tc on it

when I 'fdisk -l' it  displays /dev/sda 149GB: sda1 partition id: de, sda2 id 7, sda3 id 7, [extended] sda4 id f - Win95 ext'd (LBA), sda5 id 7 [extended]    /dev/sdb 29GB: sdb1 id c

'blkid' lists (first 6 in order:) ..sda2, ..sda5, ..sda3, ..sda1, ..sr0, ..sdb1 - all listed just once
  ...and I just rebooted by using the icon, leaving the flash drive in,.... and it works as expected with no double entries after clicking the mount icon

Any thoughts on why?

Rich:
Hi dcyran
That is strange. When the  Mount Tool  is showing double entries, does clicking the  Refresh  button fix it?

Navigation

[0] Message Index

[#] Next page