WelcomeWelcome | FAQFAQ | DownloadsDownloads | WikiWiki

Author Topic: TC 8.2.1 sh crash on boot  (Read 1022 times)

Offline Maksim

  • WikiUser
  • *
  • Posts: 2
TC 8.2.1 sh crash on boot
« on: January 21, 2018, 03:00:03 AM »
Hello everybody,

I downloaded Tiny Core Plus version 8.2.1, wrote to the CD, tried to run on the old laptop and got an error. The previous version of 7 works fine on it.

Part of the message from the console:
Code: newbielink:javascript:void(0); [nonactive]
Decompressing Linux... Parsing ELF... No relocation needed... done.
Booting the kernel.

sh: ../sysdeps/x86/cacheinfo.c:262: handle_intel: Assertion `maxidx >=2` failed.
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b

Kernel Offset: disabled
Rebooting in 60 seconds..

Computer: Toshiba 550CDT v.7.20

Code: newbielink:javascript:void(0); [nonactive]

Processor Options               Intel® Pentium® processor, 266MHz (2.0v/2.5v) w/MMX™
Integrated Co-Processor         Yes
Process Cache(L1) Capacity      32KB: (16KB code; 16KB data)
External data bus width         64 bit
External data/address bus speed 66.6 MHz
LEVEL2 (L2) Cache               Yes: 512KB
Cache Memory Type               2 Mbit Pipelined Burst Synchronous SRAM: (32K x 32bit, 2.5V) x 2
Access Time                     8 ns
Data/Address Bus Width          64 bit
Local Bus Clock Speed           66 MHz

System Architecture

PCI BUS                         PCI BUS V.2.1: (32-bit, 33 MHz)
Connecting Devices              PC Card Slots, Expansion Bus, Graphics Controller, Modem DSP, HDD, CD-ROM
ISA BUS                         ISA BUS: 8-bit, 8 MHz
Connecting Devices              BIOS, FDD, KBC, Sound chip


Type                            64Mbit EDO DRAM, 3.3V
Standard                        32 MB
Maximum                         160MB
Speed                           60ns
Hyper Page mode support         Yes
Data/Address Bus Width          64 bit
Bus Speed                       66 MHz

Type                            4Mbit FLASH EPROM
Capacity                        512K
Supported Standards             APM (v.1.2), ACPI (v.1.0), PnP (v.1.0a ), VESA (v2.0), DPMS, DCC2B, DMI (v.2.0), PCI BIOS

Thank you.

Offline curaga

  • Administrator
  • Hero Member
  • *****
  • Posts: 9954
Re: TC 8.2.1 sh crash on boot
« Reply #1 on: January 21, 2018, 11:15:13 AM »
That is a glibc bug, specifically affecting older processors only. If you google the message, you can pinpoint the affected versions; it's also been mentioned here before. We generally do not change such core components in a release, and anyway 9.x is already underway.

Please use either version 7 or 9.
The only barriers that can stop you are the ones you create yourself.

Offline Maksim

  • WikiUser
  • *
  • Posts: 2
Re: TC 8.2.1 sh crash on boot
« Reply #2 on: January 21, 2018, 11:19:42 AM »
OK, many thanks!