WelcomeWelcome | FAQFAQ | DownloadsDownloads | WikiWiki

Author Topic: VBox installation  (Read 103 times)

Offline wuzamarine

  • WikiUser
  • *
  • Posts: 5
VBox installation
« on: October 26, 2017, 06:07:12 AM »
I am actually trying to install Tiny on an x86 image to go on a Motorola phone but the installation failed epically so I switched to Vbox and running into all the exact same errors.


VBox log load output:

Code: [Select]
00:00:25.129502 Changing the VM state from 'RUNNING' to 'RESETTING'
00:00:25.130578 APIC: Re-activating Local APIC
00:00:25.130614 CPUM: SetGuestCpuIdFeature: Enabled APIC
00:00:25.130648 PIT: mode=3 count=0x10000 (65536) - 18.20 Hz (ch=0)
00:00:25.135696 PIIX3 ATA: Ctl#0: finished processing RESET
00:00:25.135812 PIIX3 ATA: Ctl#1: finished processing RESET
00:00:25.135883 AC97: Reset
00:00:25.135997 PDMR3Reset: after     6 ms, 1 loops: 1 async tasks - piix3ide/0
00:00:25.152355 Changing the VM state from 'RESETTING' to 'RUNNING'
00:00:25.157159 VMMDev: Guest Log: BIOS: VirtualBox 5.0.40
00:00:25.168189 PIT: mode=2 count=0x10000 (65536) - 18.20 Hz (ch=0)
00:00:25.210533 Display::handleDisplayResize: uScreenId=0 pvVRAM=0000000000000000 w=720 h=400 bpp=0 cbLine=0x0 flags=0x0
00:00:25.211041 GUI: UIFrameBufferPrivate::NotifyChange: Screen=0, Origin=0x0, Size=720x400, Sending to async-handler
00:00:25.211232 GUI: UIMachineView::sltHandleNotifyChange: Screen=0, Size=720x400
00:00:25.211256 GUI: UIFrameBufferPrivate::handleNotifyChange: Size=720x400
00:00:25.211277 GUI: UIFrameBufferPrivate::performResize: Size=720x400, Directly using source bitmap content
00:00:25.222161 PIIX3 ATA: Ctl#0: RESET, DevSel=0 AIOIf=0 CmdIf0=0xec (-1 usec ago) CmdIf1=0xa0 (-1 usec ago)
00:00:25.222381 PIIX3 ATA: Ctl#0: finished processing RESET
00:00:25.222980 VMMDev: Guest Log: BIOS: ata0-0: PCHS=16383/16/63 LCHS=1024/255/63
00:00:25.224043 PIIX3 ATA: Ctl#0: RESET, DevSel=1 AIOIf=0 CmdIf0=0xec (-1 usec ago) CmdIf1=0xa0 (-1 usec ago)
00:00:25.224219 PIIX3 ATA: Ctl#0: finished processing RESET
00:00:25.225237 PIIX3 ATA: Ctl#1: RESET, DevSel=0 AIOIf=0 CmdIf0=0xa1 (-1 usec ago) CmdIf1=0x00 (-1 usec ago)
00:00:25.225366 PIIX3 ATA: Ctl#1: finished processing RESET
00:00:25.236491 PIT: mode=2 count=0x48d3 (18643) - 64.00 Hz (ch=0)
00:00:25.258043 Display::handleDisplayResize: uScreenId=0 pvVRAM=00007f6574f63000 w=640 h=480 bpp=32 cbLine=0xA00 flags=0x0
00:00:25.258108 GUI: UIFrameBufferPrivate::NotifyChange: Screen=0, Origin=0x0, Size=640x480, Sending to async-handler
00:00:25.258153 GUI: UIMachineView::sltHandleNotifyChange: Screen=0, Size=640x480
00:00:25.258168 GUI: UIFrameBufferPrivate::handleNotifyChange: Size=640x480
00:00:25.258180 GUI: UIFrameBufferPrivate::performResize: Size=640x480, Directly using source bitmap content
00:00:27.714740 Display::handleDisplayResize: uScreenId=0 pvVRAM=0000000000000000 w=720 h=400 bpp=0 cbLine=0x0 flags=0x0
00:00:27.716124 GUI: UIFrameBufferPrivate::NotifyChange: Screen=0, Origin=0x0, Size=720x400, Sending to async-handler
00:00:27.716192 GUI: UIMachineView::sltHandleNotifyChange: Screen=0, Size=720x400
00:00:27.716207 GUI: UIFrameBufferPrivate::handleNotifyChange: Size=720x400
00:00:27.716218 GUI: UIFrameBufferPrivate::performResize: Size=720x400, Directly using source bitmap content
00:00:27.722875 PIT: mode=2 count=0x10000 (65536) - 18.20 Hz (ch=0)
00:00:27.723094 VMMDev: Guest Log: BIOS: Boot : bseqnr=1, bootseq=0231
00:00:27.723267 VMMDev: Guest Log: BIOS: Boot from Floppy 0 failed
00:00:27.723461 VMMDev: Guest Log: BIOS: Boot : bseqnr=2, bootseq=0023
00:00:27.723796 VMMDev: Guest Log: BIOS: Booting from CD-ROM...

Boot following selection:
Code: [Select]
00:00:37.700079 VMMDev: Guest Log: BIOS: KBD: unsupported int 16h function 03
00:00:37.700302 VMMDev: Guest Log: BIOS: AX=0305 BX=0000 CX=0000 DX=0000
00:00:37.845030 PIT: mode=2 count=0xf89 (3977) - 300.02 Hz (ch=0)
00:00:37.995315 PIT: mode=0 count=0x10000 (65536) - 18.20 Hz (ch=0)
00:00:38.059961 OHCI: Software reset
00:00:38.149398 IEM: rdmsr(0x64e) -> #GP(0)
00:00:38.149606 IEM: wrmsr(0xe01,0x0`2000001f) -> #GP(0)

the screen I'm looking at:



I tried all 32 bit versions of Tiny/Core/Coreplus with the exact same error.


Host machine specs:
https://bpaste.net/show/9aa3ac2829c4

    [EDIT]: Added code tags.  Rich
« Last Edit: October 26, 2017, 08:19:03 AM by Rich »