WelcomeWelcome | FAQFAQ | DownloadsDownloads | WikiWiki

Author Topic: piCore-8.0beta4  (Read 2075 times)

Offline bmarkus

  • Administrator
  • Hero Member
  • *****
  • Posts: 6835
    • My Community Forum
piCore-8.0beta4
« on: July 21, 2016, 09:39:04 PM »
Team Tiny Core is proud to announce immediate availability of the second beta release of the piCore-8.0 edition.

With this release kernel is frozen, it will be used in final version (except really serious issue found).


8.0beta4

- kernel updated to 4.4.15
- firmware updated to 20160715
- MicroPython updated to 1.8.2-19


8.0beta3

- kernel updated to 4.4.14
- firmware updated to 20160626
- MicroPython updated to 1.8.1-90
- added ZBUD=y to kernel config
- on-board audio enabled by default
- VC I2C disabled by default
- serial console works on RPi3, using /dev/ttyS0, all other boards /dev/ttyAMA0
- serial console terminal emulation change from VT100 to linux


8.0beta2

- kernel updated to 4.4.13
- e2fsprogs updated to 1.43.1
- MicroPython updated
- RPi firmware updated to 20160613


8.0beta1

- kernel 4.4.11
- glibc 2.23
- BusyBox 1.24.2
- util-linux 2.28
- e2fsprogs 1.43
- MicroPython 1.8
- Perl 5.24
- GCC 6.1

TC scripts also updated to latest common base. Except ncurses which doesn't build properly all packages in the repo updated and rebuilt using the new toolchain, not just copied over from 6.x/7.x repos. Dependencies revised, may be different to previous versions. It means limited number of packages in the repo, e.g. Xorg and graphical stuff are missing.

Only one SD card image available, it works on all RPi boards. Download location:

http://tinycorelinux.net/8.x/armv6/test_releases/

Please try it and share your experience, bugs found, etc.
Béla
Ham Radio callsign: HA5DI

"Amateur Radio: The First Technology-Based Social Network."

Offline Paul_123

  • Sr. Member
  • ****
  • Posts: 373
Re: piCore-8.0beta4
« Reply #1 on: July 23, 2016, 07:25:11 PM »
Couple of systems upgraded PI3, B.   No issues so far.

Offline bmarkus

  • Administrator
  • Hero Member
  • *****
  • Posts: 6835
    • My Community Forum
Re: piCore-8.0beta4
« Reply #2 on: July 23, 2016, 08:53:32 PM »
Couple of systems upgraded PI3, B.   No issues so far.

Thanks!
Béla
Ham Radio callsign: HA5DI

"Amateur Radio: The First Technology-Based Social Network."

Offline mbivol10

  • WikiUser
  • *
  • Posts: 9
Re: piCore-8.0beta4
« Reply #3 on: July 25, 2016, 02:56:23 AM »
Still no GUI available ...
I have few questions and I'm sorry I don't understand much even after reading the book for TinyCore.
My Raspberry Pi is 3B.
But I think that is armv7 yet the test versions being built are under armv6. To me its a huge deal to just know if builts for armv7 are not built because they are the same as armv6 or not? If they are not the same in source code... then whats the difference?

Other question is when I download and then of course make space for the second partition, as ext4 why is this second partition needed? would it not be better to just extend the fat partition instead? Also I know that the fat partition is loaded into ram and then no changes can be made unless you tell it not to load into ram or you mount it and then make changes. How can I make it not load into ram? is it a boot code ? or what should I do? I couldn't figure it out after reading the book.

Offline bmarkus

  • Administrator
  • Hero Member
  • *****
  • Posts: 6835
    • My Community Forum
Re: piCore-8.0beta4
« Reply #4 on: July 25, 2016, 03:56:38 AM »
Test versions work on ALL RPi boards. It is stated in release announcement. Read it!

FAT partition is not loaded to RAM.

Do not use the FAT partition (/dev/mmcblk0p1) other than boot. Keep as it is except customizing command line and config. It is not Linux-friendly and not a journaling file system.
Béla
Ham Radio callsign: HA5DI

"Amateur Radio: The First Technology-Based Social Network."

Offline tohox

  • WikiUser
  • *
  • Posts: 24
Re: piCore-8.0beta4
« Reply #5 on: August 10, 2016, 08:42:41 AM »
Hi,

Is there a complete list of TCZs currently available for piCore 8 with brief descriptions? I'm looking for an image display utility such as fbi or qiv and I tried searching with TCE for keywords such as image/picture/viewer and only found libraries but not utilities.

Thanks,

Offline Juanito

  • Administrator
  • Hero Member
  • *****
  • Posts: 8989
Re: piCore-8.0beta4
« Reply #6 on: August 10, 2016, 09:04:57 AM »

Offline tohox

  • WikiUser
  • *
  • Posts: 24
Re: piCore-8.0beta4
« Reply #7 on: August 10, 2016, 10:57:11 AM »
Yes. Well, almost... I had already found those lists but unless you are already familiar with the extension names and know what they do it can be difficult finding what you need. I assume that using the keyword option in TCE searches through all the module descriptions as opposed to the search option which only looks at the titles. Correct?

So if don't find any extensions whose name I already know through the search option and don't find anything related to relevant words through the keyword option then it is safe to assume that there is no such extension available as yet?

Thanks,

Offline curaga

  • Administrator
  • Hero Member
  • *****
  • Posts: 9384
Re: piCore-8.0beta4
« Reply #8 on: August 10, 2016, 11:59:32 PM »
The tags option searches through tags.db.gz, so if no viewers come up, there either are none, or they don't have that as a tag.

http://tinycorelinux.net/8.x/armv6/tcz/tags.db.gz
The only barriers that can stop you are the ones you create yourself.

Offline sbp

  • Sr. Member
  • ****
  • Posts: 429
    • piCorePlayer homepage
Re: piCore-8.0beta4
« Reply #9 on: August 16, 2016, 10:51:43 AM »
Hi Bela.

I have a problem with the Hifiberry DAC+ I2S DAC now. It simply isn't detected. Other I2S DACs are working fine (like the IQaudIO DAC).

dmesg show this
Code: [Select]
[    3.929387] usb 1-1.4: Manufacturer: Logitech
[    3.939819] input: Logitech USB Optical Mouse as /devices/platform/soc/20980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:046D:C077.0002/input/input1
[    3.951710] hid-generic 0003:046D:C077.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-20980000.usb-1.4/input0
[    4.478277] zram: Added device: zram0
[    5.061954] gpiomem-bcm2835 20200000.gpiomem: Initialised: Registers at 0x20200000
[    5.063062] bcm2835-wdt 20100000.watchdog: Broadcom BCM2835 watchdog timer
[    5.190068] bcm2708_i2c 20804000.i2c: BSC1 Controller at 0x20804000 (irq 77) (baudrate 100000)
[    5.965491] zram0: detected capacity change from 0 to 105721856
[    5.991300] random: mkswap urandom read with 106 bits of entropy available
[    6.023712] Adding 103240k swap on /dev/zram0.  Priority:-1 extents:1 across:103240k SSFS
[    6.457730] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    8.021568] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    8.160854] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    9.178740] random: nonblocking pool is initialized
[   14.575283] i2c /dev entries driver
[   14.641538] uart-pl011 20201000.uart: no DMA platform data
[   14.649628] snd-rpi-hifiberry-dacplus soc:sound: ASoC: CODEC DAI pcm512x-hifi not registered
[   14.649670] snd-rpi-hifiberry-dacplus soc:sound: snd_soc_register_card() failed: -517
[   15.915489] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[   17.408363] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
tc@box:~$


lsmod shows:
Code: [Select]
tc@box:~$ lsmod
Module                  Size  Used by    Not tainted
snd_soc_pcm512x_i2c     2698  0
snd_soc_pcm512x        19804  1 snd_soc_pcm512x_i2c
snd_soc_hifiberry_dac     3027  0
snd_soc_hifiberry_dacplus     4954  0
snd_soc_bcm2835_i2s     6994  0
i2c_dev                 6578  0
snd_soc_core          163972  4 snd_soc_pcm512x,snd_soc_hifiberry_dac,snd_soc_hifiberry_dacplus,snd_soc_bcm2835_i2s
regmap_i2c              4078  1 snd_soc_pcm512x_i2c
snd_pcm_dmaengine       5906  1 snd_soc_core
snd_pcm                95473  5 snd_soc_pcm512x,snd_soc_hifiberry_dac,snd_soc_hifiberry_dacplus,snd_soc_core,snd_pcm_dmaengine
snd_timer              22396  1 snd_pcm
snd                    68368  3 snd_soc_core,snd_pcm,snd_timer
regmap_mmio             3728  1 snd_soc_bcm2835_i2s
squashfs               32160 17
evdev                  11650  0
i2c_bcm2708             5740  0
bcm2835_wdt             4133  0
spi_bcm2835             7424  0
bcm2835_gpiomem         3823  0
zram                   22461  1
zsmalloc               14329  1 zram
lz4_compress            3289  1 zram
uio_pdrv_genirq         3718  0
uio                    10230  1 uio_pdrv_genirq
tc@box:~$

Do you have an idea of what is going on.
I will try to go back to previous piCore versions to spot where it was working.

Thanks
Steen


Offline sbp

  • Sr. Member
  • ****
  • Posts: 429
    • piCorePlayer homepage
Re: piCore-8.0beta4
« Reply #10 on: August 16, 2016, 01:33:32 PM »
review of piCore8.0 beta 1

Same problem:
Code: [Select]
[    5.979631] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    8.283470] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    8.827662] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[   14.675762] snd-rpi-hifiberry-dacplus soc:sound: ASoC: CODEC DAI pcm512x-hifi not registered
[   14.675802] snd-rpi-hifiberry-dacplus soc:sound: snd_soc_register_card() failed: -517
[   14.722339] i2c /dev entries driver
[   14.749060] snd-rpi-hifiberry-dacplus soc:sound: ASoC: CODEC DAI pcm512x-hifi not registered
[   14.749098] snd-rpi-hifiberry-dacplus soc:sound: snd_soc_register_card() failed: -517
[   14.758744] uart-pl011 20201000.uart: no DMA platform data
[   15.896088] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[   17.556191] random: nonblocking pool is initialized
[   17.556443] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
tc@box:~$


Offline sbp

  • Sr. Member
  • ****
  • Posts: 429
    • piCorePlayer homepage
Re: piCore-8.0beta4
« Reply #11 on: August 16, 2016, 01:45:39 PM »
piCore7.00 beta4  - here hifiberry DAC+ is found. But still it produce a similar error in dmesg (so this error is probably not important):

Code: [Select]
[   15.295052] snd-rpi-hifiberry-dacplus sound: ASoC: CODEC DAI pcm512x-hifi not registered
[   15.432086] snd-rpi-hifiberry-dacplus sound: snd_soc_register_card() failed: -517
[   15.581995] i2c /dev entries driver
[   15.596562] snd-rpi-hifiberry-dacplus sound: pcm512x-hifi <-> 20203000.i2s mapping ok
[   15.637521] uart-pl011 20201000.uart: no DMA platform data
[   17.803076] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[   19.335928] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
[   21.389657] random: nonblocking pool is initialized

lsmod:
Code: [Select]
tc@box:~$ lsmod
Module                  Size  Used by    Not tainted
i2c_dev                 6686  0
snd_soc_hifiberry_dac     2911  0
snd_soc_pcm512x_i2c     2570  1
snd_soc_pcm512x        18073  1 snd_soc_pcm512x_i2c
snd_soc_hifiberry_dacplus     4736  0
snd_soc_bcm2708_i2s     7654  2
snd_soc_core          168317  4 snd_soc_hifiberry_dac,snd_soc_pcm512x,snd_soc_hifiberry_dacplus,snd_soc_bcm2708_i2s
snd_pcm_dmaengine       5794  1 snd_soc_core
regmap_i2c              3346  1 snd_soc_pcm512x_i2c
snd_pcm                93037  5 snd_soc_hifiberry_dac,snd_soc_pcm512x,snd_soc_hifiberry_dacplus,snd_soc_core,snd_pcm_dmaengine
regmap_mmio             3556  1 snd_soc_bcm2708_i2s
snd_timer              24444  1 snd_pcm
snd_compress            8861  1 snd_soc_core
clk_hifiberry_dacpro     2682  1
snd                    68803  4 snd_soc_core,snd_pcm,snd_timer,snd_compress
i2c_bcm2708             6208  0
spi_bcm2835             7880  0
bcm2835_gpiomem         3703  0
bcm2835_rng             2207  0
uio_pdrv_genirq         3670  0
uio                    10078  1 uio_pdrv_genirq

aplay -l
Code: [Select]
tc@box:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: sndrpihifiberry [snd_rpi_hifiberry_dacplus], device 0: HiFiBerry DAC+ HiFi pcm512x-hifi-0 []
  Subdevices: 1/1
  Subdevice #0: subdevice #0
tc@box:~$

so in piCore version7 the Hifiberry DAC is found but in version8 it is not found.
In both tests alsa.tcz is installed via tce command.
« Last Edit: August 16, 2016, 02:00:48 PM by sbp »

Online Rich

  • TinyCore Moderator
  • Hero Member
  • *****
  • Posts: 5197
Re: piCore-8.0beta4
« Reply #12 on: August 16, 2016, 05:05:16 PM »
Hi sbp
From the version that works:
Quote
Code: [Select]
[   15.596562] snd-rpi-hifiberry-dacplus sound: pcm512x-hifi <-> 20203000.i2s mapping ok
Is it possible  i2s  got disabled in the newer versions?

Offline bmarkus

  • Administrator
  • Hero Member
  • *****
  • Posts: 6835
    • My Community Forum
Re: piCore-8.0beta4
« Reply #13 on: August 16, 2016, 11:04:17 PM »
Hi Steen

I don't have such board so can't test. Kernel config related to sound in 8.0 is the same as Raspbian. If it Works there look for differences in config.txt

Next week will be beta5 with 4.4.17 kernel but expect no deifference.

Béla
Béla
Ham Radio callsign: HA5DI

"Amateur Radio: The First Technology-Based Social Network."

Offline Paul_123

  • Sr. Member
  • ****
  • Posts: 373
Re: piCore-8.0beta4
« Reply #14 on: August 17, 2016, 04:37:45 AM »
Bela,

I don't have the boards to test either, and not sure yet if it will fix the problem.   But the alsa-modules-KERNEL extensions are missing the module.

drivers/clk/clk-hifiberry-dacpro.ko

Paul