Tiny Core Base > Micro Core
Internet isn't working after usb boot on micro core.
(1/1)
apuboard:
So I booted the Micro Core Linux on an APU. Now, I was trying to install it on the SSD with tc-install but my internet doesn't work. How do I have to troubleshoot.
This is the output I got for ifconfig:
tc@box:~$ ifconfig
eth0 Link encap:Ethernet HWaddr 00:0D:B9:3E:D1:F4
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Or do you have other possiblities to install the micro core from usb?
gerald_clark:
Use tinycore or coreplus. They contain the installer.
Rich:
Hi apuboard
You don't have an IP address assigned. Create a script called eth0.sh and save it in /opt
--- Code: ---#!/bin/sh
pkill udhcpc
ifconfig eth0 192.168.1.30 netmask 255.255.255.0 broadcast 192.168.1.255 up
route add default gw 192.168.1.1
echo nameserver 68.237.161.12 > /etc/resolv.conf
echo nameserver 71.243.0.12 >> /etc/resolv.conf
--- End code ---
Change the addresses to values suitable for your environment, then:
--- Code: ---chmod 775 /opt/eth0.sh
sudo /opt/eth0.sh
--- End code ---
Then run ifconfig again and see if it has an IP address assigned. You are running a wired connection, not wireless, right?
Navigation
[0] Message Index
Go to full version